Hisense FRIDGE 2087 - User Manual
Hisense FRIDGE 2087 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – The display method of Model approved code
- Page 3 – complies with Part 15 of FCC RF Rules.; MODIFICATION; could void the users authority to operate the device.; Radiation Exposure Statement; Transmitter module FCC ID:
- Page 4 – This device complies with Industry Canada’s licence
The user manual of WIFI
、
Bluetooth module
1. The product description
The user can achieve the terminal equipment connection WIFI net and Bluetooth, through this module
This equipment may be operated in all European countries.
2. Interface
◆
Interface
4pin through hole
◆
Pin definition
Pin
Name
Function
Remarks
1
VCC_5V
5V
2
UART0_TX
UART0_TX
I/O
3
UART0_RX
UART0_RX
I/O
4
GND
GND
◆
Power consumption requirements
The maximum working current is not more than 500mA, the instantaneous maximum current is not more than 700mA;
In standby mode, the power supply of the module shall be no less than 0.45W, and the power supply current shall be no
less than 1A (DC-DC is recommended).
2. Basic parameters
Feature Description
Feature Description
Model
MWB414C.2
Product Name
WiFi 11b/g/n 1T1R and BLE4.2 Model
Major Chipset
Realtek RTL8720CF
WLAN Standard
IEEE 802.11b/g/n
Max Power
20dBm
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
BT Standard BLE4.2 for BLE only WLAN Frequency Range 2.4GHz~2.4835GHz BT Frequency Range 2.4GHz~2.4835GHz Spread Spectrum IEEE 802.11b: DBPSK, DQPSK, CCK for DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g: BPSK, QPSK,16QAM,64QAM for OFDM (Orthogonal Frequency Division Multiplexing) IEEE 802.11n...
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID:******** 7. Radia...
yourbody. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter Manufacturer: QingdaoHisense Communication Co., Ltd. Address: 218 Qianwangang Road, Qingdao Economic & Technological Development Zone, Qingdao, China Importers: Hisense France SAS A...
