Hifonics OLM800D2 - Manual
Hifonics OLM800D2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Enclosure Build Materials; Bracing
- Page 5 – Glossary of Terms
- Page 8 – MT Olympus Series Subwoofer Dimensions; A B C
- Page 9 – Maxxsonics Limited Warranty
XXV
OLM800D2 / OLM800D4
OLM1600D2
MT OLYMPUS
SUBWOOFERS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SUBWOOFER INSTALLATION AND WIRING DIRECTIONS Enclosure Materials Typically, 5/8” or 3/4” MDF (Medium Density Fiber Board) is bestfor most applications. 3/4” MDF is recommended. Enclosure Build Materials Connecting joints need to be glued and screwed to ensure noair escapes and joints do not separa...
4 Q The energy losses of relative damping (ratio of stored to dissipated energy or ratio of reactive to resistive energy).Fs Free air resonance of driver in Hz.Qms Mechanical Q.Vas Volume of air equivalent to driver from the rest position.Cms Mechanical compliance of a loud speaker piston.Mms Moving...
14 7 MT Olympus Series Subwoofer Dimensions A B C Outside Diameter Mounting Depth Cutout Diameter MODEL OLM800D2 12.64” 6.03” 10.77” OLM800D4 12.64” 6.03” 10.77” OLM1600D2 12.64” 6.82” 10.77” NOTE: There must be atleast 2” of clearance from the back of thesubwoofer to the enclousre. A B C
