Hessaire 20SFV-H - User Manual
Hessaire 20SFV-H Fan – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Shutter Fan Troubleshooting & Maint 022821 www.hessaire.com
S H U T T E R F A N T R O U B L E S H O O T I N G
Symptom
Possible Cause(s)
Corrective Action
Fan will not start
1. Tripped circuit breaker
1. Reset circuit breaker
2. Defective motor
2. Repair or replace
3. Incorrectly wired
3. Shut off power, check for proper connections
4. Electricity turned off
4. Contact local power company
Excessive noise or vibration
1. Propeller is bent or hitting housing
1. Free propeller of obstruction/replace propeller
2. Fan not securely anchored
2. Secure properly
3. Bad/noisy bearings
3. Replace motor
Insufficient airflow
1. Incorrect voltage applied
1. Wire properly
2. Defective motor
2. Replace motor
3. Propeller is damaged
3. Replace propeller
4. Blocked Airflow
4. Remove obstructions
5. Not enough intake air
5. Add additional air intake openings
6. Fan is dirty
6. Clean fan guards/screens, motor and propeller
Motor overheats or trips out
1. Over/under line voltage
1. Contact local power company
2. Defective motor
2. Replace motor
3. Fan is dirty
3. Clean fan guards/screens, motor and propeller
4. Not enough intake air
4. Add additional air intake openings
Troubleshooting Guide
Periodic maintenance and component cleaning schedules should be set to assure reliability and performance of the fan.
Fan blades should be periodically wiped down to remove any build up of dust or dirt
—
depending on the environment.
Periodically check for excessive vibration while fan is running.
Periodically inspect and tighten all set screws and hardware
—
check torque on propeller.
Assure all mounting hardware remains properly secured.
Motors feature permanently sealed ball bearings and require no further lubrication.
Note:
Please contact the dealer/distributor where you purchased the fan from with any questions regarding the fan,
manual or if you are in need of replacement parts.
Maintenance
C A R E & M A I N T E N A N C E
Warning: Disconnect power before performing any maintenance.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
