Page 5 - CONTENTS
CONTENTS 1.5 1.2 Main Features/Specifications 1.5 Contents 1.6 Introduction 1.7 Warranty 1.8 - 1.11 Safety Precautions 1.8 Safety Alert Symbol1.8 Training 1.8 - 1.9 Preparation 1.9 - 1.10 Operation 1.10 - 1.11 Maintenance & Storage 1.11 Safety Symbols1.11 Decal Symbols 1.12 Assembling the Mower ...
Page 6 - INTRODUCTION
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your machine. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and spec...
Page 7 - WARRANTY
LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / tra...
Page 8 - SAFETY PRECAUTIONS; Safety Alert Symbol
SAFETY PRECAUTIONS This safety alert symbol indicates important safety messages. Whenyou see this symbol be alert to the possibility of injury. Carefully readthe following and inform others. Your mower is perfectly safe if used correctly. Failure to observe thefollowing precautions may result in ser...
Page 11 - Maintenance & Storage
SAFETY PRECAUTIONS 1.11 Allow the engine to cool before storing in any enclosure. To reduce thefire hazard, keep the engine and the surrounding deck area free ofgrass, leaves, or excessive grease. Check the flap frequently for wear or deterioration.Replace worn or damaged parts for safety. If the fu...
Page 13 - BEFORE STARTING THE MOWER; Prevent Engine Damage; Oil Type
BEFORE STARTING THE MOWER 1.13 To prevent engine damage the engine is shipped without oil orpetrol. The engine must be filled with the correct grade of oil andpetrol before starting the engine. Always use high quality detergent oil classified “For service SE, SF,SG” SAE 30 oil. Never use additives w...
Page 14 - Controls
1.14 Operate all control levers several times and ensure that the cablesmove freely. Check that the engine stop lever returns freely to it’s restposition when released.Whilst operating the engine throttle mechanism slight resistanceshould be felt when moving the lever to the ‘ choke ’ position. Move...
Page 15 - Turning; Slopes
1.15 Forward travel: Hold and push against the handlebar with both hands to move the mower forwards. Reverse travel: Hold and pull against the handlebar with both hands to reverse the mower towards you. To make a wide turn steer the mower with the handlebar in the direc-tion required.To make a tight...
Page 17 - OPERATING; Heavy Growth; Cutterblade Operation
1.17 OPERATING Always select the maximum height of cut setting to prevent the engineoverloading. Be prepared to make two cuts when the grass is long. To prevent damage to your lawn do not remove more than one third ofgrass height in one cut. Hayter balanced ‘C’ type cranked cutterblades are fitted t...
Page 18 - LAWN CARE CALENDAR
LAWN CARE CALENDAR 1.18 There is very little work to do this month apart from brushing awayleaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly. Spike the lawn to aerate and stimulate soilorganisms and root growth and apply lawn sand if necessary. The yearly lawn work progr...
Page 21 - MOWER MAINTENANCE; Engine
2 1 1 2 3 BRIGGS & STR ATTON HAR RIER 41 6 5 4 MOWER MAINTENANCE Clean the engine cooling system. Clean more often under dustyconditions or when airborne debris is present or after prolongedoperation whilst cutting tall, dry grass. Replace the spark plug. 1. Air Filter 2. Fuel Cap 3. Start Grip ...
Page 22 - Oil Service
MOWER MAINTENANCE Check the oil level daily before starting the engine and ensure that thecorrect oil level is maintained. Refer to-‘Before Starting the Mower’for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafteraccording to the ‘Mainten...
Page 24 - Securing Nuts & Bolts
MOWER MAINTENANCE 1.24 Remove grass debris from the top and underside of the deck housingimmediately after use. To prevent accidents fertilisers and top dressings are particularlycorrosive. Thoroughly clean the mower deck immediately after useon treated grass and store well away from corrosive mater...
Page 25 - Cutterblade Removal
MOWER MAINTENANCE WARNING - PREVENT ACCIDENTS: Never work on the cut-terblades unless the spark plug lead has been removed. The cut-terblades have sharp edges. ALWAYS wear strong gloves to pro-tect your hands when working on the cutterblades. DO NOT rotatetools towards the cutting edges to avoid the...
Page 26 - Storage
MOWER MAINTENANCE 1.26 To store the handlebar unscrew the 2 small securing knobs sufficient-ly to allow it to be pivoted forwards to rest against the mower. Takecare to ensure that the control cables do not become snagged at thepivot point and depress the engine stop lever to prevent it being dam-ag...
Page 27 - TROUBLE SHOOTING
PROBLEM POSSIBLE FAULT REMEDY Engine will not turn over Engine stop lever released Operate the engine stop lever Incorrect oil level Check oil level Obstruction under deck Remove obstruction Engine smokes Excess oil level Check oil level Air cleaner plugged Service air cleaner Engine runs then stops...
Page 29 - CONFORMITY
EC DECLARATION OF CONFORMITY Manufacturer: HAYTER LIMITED,Address: Spellbrook, Bishop’s Stortford, Herts. CM23 4BU. ENGLAND declare that the lawnmower : Model name: Type:Model No: Cutting width:Speed of rotation of the cutting device:Engine Manufacturer:Speed of rotation of engine: Hayterette PushPe...
Page 30 - PARTS LIST
Item No. Description Part No. Qty Item Note 1 Pin - Pivot 340182 2 2 Washer - 19mm Nylon 09688 6 3 Lever - Engine 111-0102 1 4 Screw - 6mm x 20 09687 2 5 Bottom Plate HY2811 1 6 Handlebar - Upper 305145W 1 7 Guide - Rope 305093 1 8 Throttle Control & Cable 111-1113 1 9 Screw - M6 x 55mm Taptite ...
Page 33 - NOTES
1.33 NOTES Notes:- 111-1292 A 20/4/07 1:51 pm Page 1.33
Page 36 - CUSTOMER INFORMATION
1.36 CUSTOMER INFORMATION Serial No: Engine Type:- 12F802-788B Engine:- Briggs & Stratton Quantum XTS 50 Date of Sale:- Your Local Dealer:- 111-1292 A 20/4/07 1:51 pm Page 1.36
