Harman Kardon HD 990 - Manual

5 HD 990 Front Panel Controls 1 Main Information Display: this display delivers messages and status indications to help you operate the cd player. 2 Power On/Off (Standby): press the button once to turn the cd player on, press it again to put the unit in the standby mode. 3 Open/Close: press this bu...

6 HD 990 Rear Panel Connections  Digital Output: connect this jack to the coaxial or optical digital input of an external digital-to-analog converter for direct access to the digital signals of the cd player or the external digital audio source. do not connect this jack to the standard audio inputs...

7 HD 990 HD 990 Remote Control Functions a power off b power on c numeric controls d program Button e clear Button f repeat Button g repeat a › B Button h skip Buttons i search Buttons j play/pause Button k stop Button l +10/–10 Buttons m random Button n time Button o check Button p open/close Butto...

HD 990 8 Installation Installation to prevent possible damage to your speakers and other components in your audio system, it is important that all components, including the hd 990 and your receiver or preamp and amplifiers, are turned off and unplugged from their ac power source when installing any ...

HD 990 9 Operation Operation Loading and Unloading Discs to load a disc, first turn the unit on (if it is not already) by pressing the power switch 2 on the front panel or the power on button b on the remote, then press the open/ close button 3 p , taking care to make certain that the space in front...

11 HD 990 Programmed Play Operation Programmed Play the hd 990’s advanced programming capability enables you to select certain tracks, to preset the order in which these tracks play, and to clear specific programmed tracks after the program was made.programmed play allows you to program up to 32 tra...

12 HD 990 Repeat Play Operation Repeat Play the hd 990’s programming system enables you to repeat either a single track, the entire disc (respectively all programmed tracks) or a specially programmed passage that you select. Repeat One Track to repeat the track in play, press the repeat button f onc...

13 HD 990 Troubleshooting Symptom Cause Solution no lights on front panel no ac power • make certain that ac power cord is plugged into a live outlet. • remote does not appear to operate power switch turned off • Weak batteries • Blocked sensor • turn on power switch. • Install fresh batteries, obse...

14 HD 990 Specifications Signal Format sampling frequency: 32khz to 96khz d/a conversion: multilevel delta-sigma, dual dac configuration oversampling: 24-bit/384khz asynchronous sample rate converter Discrete Analog Output Section error correction: error correction frequency response: 20hz – 20khz +...