Hansgrohe 38830XX1 - Manual
Hansgrohe 38830XX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Technical Specification; Installer
- Page 3 – Installation
- Page 4 – Re-set the High Temperature Limit Stop
- Page 5 – Replacement Parts
- Page 6 – Cleaning Recommendation for Hansgrohe Products; Cleaning Materials for Faucets and Showers; Limited Lifetime Consumer Warranty; User Instructions; If the flow of water diminishes, remove and clean the aerator.
Installation Instructions / Warranty
Uno
2
38830XX1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Uno 2 Sink Mixer 38830XX1 Technical Specification Flow rate 2.2 gpm Max. incoming water pressure 145 psi Recommended incoming water pressure 14.5 - 72 psi Max. incoming hot water temp 176 o F* Recommended incoming hot water temp 120 o F - 140 o F* Hole size in mounting surface 1 1/4” Maximum mount...
3 Installation If the countertop is less than 1 3/8”, install the faucet with the gray plastic spacer, fiber washer, metal washer and mounting nut. If the countertop is greater than 1 3/8”, install the faucet without the spacer. If the countertop is greater than 2 3/8”, install the shaft extension. ...
4 Connect the hot and cold supply hoses to the stops with 3/8” compression fittings (not included). Tighten wrench tight. Re-set the High Temperature Limit Stop (optional): Remove the screw cover. Loosen the handle screw 2 complete turns. Remove the handle. Remove the nut cover and the high temperat...
