Hansgrohe 34120XX1 - Manual
Hansgrohe 34120XX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Axor Citterio M
- Page 4 – Installation; Position the faucet and sealing gasket on the mounting
- Page 5 – Connect the hot and cold supply hoses to the stops with; Set the High Temperature Limit Stop (optional); Use a 3 mm Allen wrench to push the screw cover
- Page 6 – Note; : the temperatures given in the diagram assume
- Page 8 – User Instructions; Turn the water on by pushing the handle up. Turn it off
- Page 9 – Troubleshooting; Flush the aerator with clear water, then replace it on
- Page 10 – Replacement Parts
Installation Instructions / Warranty
Axor Citterio M
34010XX1
34016XX1
34017XX1
Axor Citterio M
34120XX1
34127XX1
Axor Citterio M
34210XX1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 34010XX1 34017XX1 34016XX1 34210XX1 Axor Citterio M Lav Mixer 34010XX1 Small Lav Mixer 34016XX1 Lav Mixer less Drain 34017XX1 Tall Lav Mixer 34120XX1 Tall Lav Mixer less Drain 34127XX1 Bidet Mixer 34210XX1
4 Installation Install the drain pull rod*. Position the faucet and sealing gasket on the mounting surface.Install the fiber washer, friction washer, and mounting nut. Tighten the mounting nut by hand. Tighten the tensioning screws. *Drain and pull rod not included with models 34017XX1 or 34027XX1.
5 Connect the hot and cold supply hoses to the stops with 3/8" compression fittings (not included).Use two wrenches, as shown, to prevent the hoses from twisting. Set the high temperature limit stop, if desired.Install the pop-up drain. Set the High Temperature Limit Stop (optional) Use a 3 mm A...
