Hansgrohe 32020XX1 - Manual
Hansgrohe 32020XX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Talis S Lavatory Mixer; Technical Specification
- Page 3 – Installation
- Page 4 – User Instructions
- Page 5 – Reset the high temperature limit stop:
- Page 6 – Replacement Parts
- Page 7 – Cleaning Recommendation for Hansgrohe Products; Limited Lifetime Consumer Warranty
Installation Instructions / Warranty
Talis S
32020XX1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Talis S Lavatory Mixer 32020XX1 32020XX1 Technical Specification Flow Rate 2.2 gpm Max incoming water pressure 145 psi Recommended incoming water pressure 14.5 - 72 psi Max incoming hot water temperature 176 o F* Recommended incoming hot water temp. 120 o F - 140 o F* Maximum mounting surface thic...
3 6 66 1 2 3 Installation If the mounting surface is greater than 3/16”, leave the spacer ring intact. Place the mounting plate over the stud. Tighten the collar so that it is snug against the bottom of the mount- ing surface. Install the supply hoses to the stops with the compres- sion fittings, ta...
4 User Instructions Pivot the handle up to turn the water on, down to turn it off. Pivot the handle to the right for cooler water, to the left for warmer water. Install the Pop-up Drain: Unscrew the flange from the tee. Place the tee and sealing gasket on top of the sink. From below, install the bla...
