Hansgrohe 15072XX1 - Manual
Hansgrohe 15072XX1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Technical Information / Données techniques / Datos técnicos
- Page 4 – Installation; Tighten the tensioning screws using a screwdriver.; English
- Page 5 – Use two wrenches as shown.; Do not allow the hoses to twist.; Test the faucet. Check all connections for leaks.
- Page 6 – Serrez les vis de pression à l’aide d’un tournevis.
- Page 7 – Installez les adaptateurs sur les butées d’arrêt.; Installez les filtres.; Français
- Page 8 – Instalación; Apriete los tornillos tensores con un destornillador.; Español
- Page 9 – Instale los adaptadores sobre los topes.; Si no se instalan los filtros,; Use las dos llaves fijas como se ilustra,; No permita las mangueras
- Page 10 – usuario
- Page 12 – Replacement Parts / Pièces détachées / Repuestos
- Page 14 – Cleaning Recommendation for Hansgrohe Products
- Page 15 – Recommandations pour le nettoyage des produits Hansgrohe
- Page 16 – Recomendación de limpieza para los productos de Hansgrohe
- Page 17 – Limited Lifetime Consumer Warranty
PuraVida
15072XX1
PuraVida
15070XX1
Installation Instructions / Warranty
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 15070XX1 15072XX1 Recommended water pressure Pression d’eau recom- mandée Presión recomendada en servicio 15 - 75 psi Max. water pressure Pression d’eau maximale Presión máximo en servicio 145 psi Recommended hot water temp. Température recommandée pour l’eau chaude Temp. recomendada del agua cali...
4 Installation Place the faucet and sealing ring on the mounting surface. Install the fiber washer, metal washer and mounting nut (1). Tighten the mounting nut by hand (2). Tighten the tensioning screws using a screwdriver. English 1 2
5 Install the adapters on the stops (1). Install the filters. Failure to install the filters may result in unsatisfactory operation of the faucet. Connect the hot and cold supply hoses to the adapters (2). Use two wrenches as shown. Do not allow the hoses to twist. Test the faucet. Check all connect...