Hansgrohe 06462XXX - Manual
Hansgrohe 06462XXX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Talis; Single Control Kitchen Faucet; Product Specifications:; Installation Considerations; necessary tools and supplies before beginning installation.; Installer; information on the faucet.
- Page 3 – optional - not included; Install the handspray hose:
- Page 4 – User instructions
- Page 6 – Limited Lifetime Consumer Warranty; Cleaning Recommendation for Hansgrohe Products; Cleaning Materials for Faucets and Showers
- Page 8 – 490 Bluegrass Lakes Parkway
Installation Instructions / Warranty
Talis
06462XXX
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Talis Single Control Kitchen Faucet 06462XXX Product Specifications: Hole size in mounting surface Minimum 1-1/2” Maximum mounting surface depth 2-3/8” Flow rate 2.2 GPM Maximum incoming water pressure 145 PSI Recommended incoming water pressure 22 - 72.5 PSI Recommended incoming hot water temp 12...
3 Install baseplate 06329XXX, ( optional - not included ) Position the baseplate and gasket on the faucet deck. From under the sink, install the mounting flanges and tighten the mounting collars by hand. The baseplate can be used on a kitchen sink with fewer than three holes. Remove and disgard the ...
4 Connect the supply hoses : use 3/8” compression fittings (not included) to connect the hot and cold supply hoses to the stops. Use two wrenches, as shown in the diagram, to prevent the hoses from twisting. Install the hose weight: proper po- sitioning of the hose weight insures that the hose will ...
