Hansgrohe 06117XX0 - Manual
Hansgrohe 06117XX0 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Considerations; Widespread Lavatory Faucets
- Page 3 – Technical Information; Install the hot and cold valves; Swing C and Limbo C only:; Installation
- Page 4 – Do not allow the connecting hose
- Page 5 – Install the pull rod; only; : The pull rod is curved. It should be installed; Tango C and Limbo C only:; The pull rod is; Finish the installation
- Page 6 – Install the Pop Up Drain
- Page 7 – Robinets de lavabo; À prendre en considération pour l’installation
- Page 8 – Écartement Swing C et Limbo C
- Page 10 – Installation de la tige d’entraînement
- Page 11 – Installation de l’obturateur à clapet
- Page 12 – Replacement Parts
- Page 14 – Cleaning Recommendation for Hansgrohe Products; Recommandations pour le nettoyage des produits Hansgrohe
- Page 15 – Limited Lifetime Consumer Warranty
Installation Instructions / Warranty
Solaris E
06633XX0
Stratos E
06577XX0
Metro E
06653XX0
Swing C
06117XX0
Swing C
06118XX0
Swing C
06119XX0
Tango C
06040XX0
Tango C
06041XX0
Tango C
06042XX0
Limbo C
06104XX0
Limbo C
06105XX0
Limbo C
06106XX0
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installation Considerations For best results, Hansgrohe recommends that this unit be installed by a licensed, profes- sional plumber.Please read over these instructions thoroughly before beginning installation. Make sure that you have all tools and supplies needed to complete the installation. • •...
3 Technical Information Recommended water pressure 14.7 - 72.5 psi Max. water pressure 147 psi Recommended hot water temp. 120 � - 140 � F* Max. hot water temp 165 � F* Hole size in mounting surface 1 1/4” valves, 1 3/8” spout Max. mounting surface depth 1 1/2” Flow rate 2.2 gpm Requires 1/2” supply...
4 Install the handles Swing C, Tango C, Limbo C only: Install the deco-rings on the handles Install the connecting hoses Push a compression nut and ferrule over the end of the connecting hose.Push the end of the hose into the valve outlet.Tighten the compression nut wrench tight. Do not allow the co...
