Page 2 - User’s Manual
User’s Manual OSD[4.393] 2 Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. This device complies with requirement of EMC directive 2004/108/EC with regard to Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard t...
Page 3 - RECYCLING INFORMATION; For more information, please visit
User’s Manual 3 RECYCLING INFORMATION We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materi...
Page 4 - TABLE OF CONTENTS
User’s Manual 4 TABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 5 PRECAUTIONS................................................................................................. 5 SPECIAL NOTES ON LCD MONITORS .............
Page 5 - SAFETY NOTICE; Only use attachments/accesories specified by the manufacturer.; PRECAUTIONS; will protect the monitor from damage due to power surges.
User’s Manual 5 SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. ...
Page 6 - SPECIAL NOTES ON LCD MONITORS; less such as a missing pixel or a pixel lit all of the time.
User’s Manual 6 SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disapp...
Page 7 - BEFORE YOU OPERATE THE MONITOR; FEATURES; LCD Monitor
User’s Manual 7 BEFORE YOU OPERATE THE MONITOR FEATURES 58,4cm / 23” Wide Screen TFT Color LCD Monitor Crisp, Clear Display for Windows GP Green Product Ergonomic Design Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following ...
Page 8 - INSTALLATION INSTRUCTIONS; INSTALL REMOVE; Figure.1. Installing and Removing the Base; POWER
User’s Manual 8 INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Carefully place the monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the monitor. 2. Align the base with the opening of the stand. 3. ...
Page 9 - SETTING THE MONITOR ON THE WALL; Remove the three (3) screws so that the stand cover can be removed.
User’s Manual 9 SETTING THE MONITOR ON THE WALL DISSEMBLING THE STAND BASE: 1. Disconnect all the cables and cords from the Monitor to prevent damage. 2. Carefully place the monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the monitor. 3. Press the re...
Page 10 - MAKING CONNECTIONS; CONNECTING TO A PC
User’s Manual 10 MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 2. Connect one end of the DVI cable to the back of the monitor and...
Page 11 - ADJUSTING THE VIEWING ANGLE; monitor’s angle to your own preference.
User’s Manual 11 ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you do not topple the monitor when you change the monitor’s angle. You are able to adjust the mo...
Page 12 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS; The power cord should be connected.
User’s Manual 12 OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. The power...
Page 13 - FRONT PANEL CONTROL; Adjust
User’s Manual 13 FRONT PANEL CONTROL Power Button: Press this button to switch ON/OFF of monitor’s power. Power Indicator: Blue — Power On mode. Orange — Power Saving mode. MENU: 1. Turn the OSD menu on. 2. Enter sub menu when OSD menu is ON. Adjust ▲▼ : 1. Invalid when the OSD menu is off. ...
Page 14 - HOW TO ADJUST A SETTINGS; PICTURE
User’s Manual 14 HOW TO ADJUST A SETTINGS PICTURE BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. Select 「 CONTRAST 」 optio...
Page 16 - PLUG AND PLAY
User’s Manual 16 PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its...
Page 17 - Q & A FOR GENERAL PROBLEMS; i Button
User’s Manual 17 TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if ...
Page 18 - Addendum related to Windows 7; Make sure your video card can run Windows 7.
User’s Manual 18 Addendum related to Windows 7 When you encounter display problem under Windows 7, you need to do the following: 1. Make sure your PC computer (Hardware requirement) can support Windows 7. 2. Make sure your video card can run Windows 7. 3. If your video card can support Windows 7, ne...
Page 19 - ERROR MESSAGE & POSSIBLE SOLUTIONS; CABLE NOT CONNECTED:; Check the signal-cable’s connection pins for damage.; MODE
User’s Manual 19 ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to ...
Page 20 - Secondary Video Format Timings
User’s Manual 20 (HDMI INPUTS) Primary Video Format Timings MODE RESOLUTION 1 640 × 480p @ 60Hz 2 720×480p @ 60Hz 3 1280×720p @ 60Hz 4 720×576p @ 50Hz 5 1280×720p @ 50Hz 6 1920×1080i @ 60Hz 7 1920×1080i @ 50Hz Secondary Video Format Timings MODE RESOLUTION 1 1920x1080p @ 25Hz 2 1920x1080p @ 30Hz 3 1...
Page 21 - APPENDIX; SPECIFICATIONS
User’s Manual 21 APPENDIX SPECIFICATIONS Driving system TFT Color LCD Size 58,4 cm / 23”Diagonal LCD Panel Pixel pitch 0.2655 mm(H) x 0.2655 mm(W) H-Frequency 30 kHz – 83 kHz Analog Signal Input V-Frequency 55 Hz – 76 Hz H-Frequency 30 kHz – 138 kHz (For Nvidia 3D mode up to 137.86 kHz) Digital Sign...
