Page 2 - User’s Manual; FCC Class B Radio Frequency Interference Statement; Reorient or relocate the receiving antenna.; CANADA
User’s Manual Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15...
Page 3 - Ergonomics
User’s Manual Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, d...
Page 4 - Recycling Information; HannStar Display Corp.; care very much about our environment protection
User’s Manual Recycling Information We, the HannStar Display Corp. care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recy...
Page 5 - TABLE OF CONTENTS
User’s Manual TABLE OF CONTENTS SAFETY NOTICE ........................................................................................... 6 PRECAUTIONS ......................................................................................... 6 SPECIAL NOTES ON LCD MONITORS .............................
Page 6 - SAFETY NOTICE; with the emission limits.; PRECAUTIONS; time. This will protect the monitor from damage due to power surges.
User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. Th...
Page 7 - SPECIAL NOTES ON LCD MONITORS; % or less such as a missing pixel or a pixel lit all of the time.
User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappea...
Page 8 - BEFORE YOU OPERATE THE MONITOR; FEATURES; LCD Monitor
User’s Manual BEFORE YOU OPERATE THE MONITOR FEATURES • 19” TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1280 X 1024 @60Hz • EPA ENERGY STAR ® • Ergonomic Design • Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package shoul...
Page 9 - INSTALLATION INSTRUCTIONS; Install; Figure.1. Installing and Removing the Base; POWER
User’s Manual INSTALLATION INSTRUCTIONS Install Remove Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the b...
Page 10 - CONTROLS AND CONNECTORS; monitor and connect the other end to the computer’s DVI-D port.
User’s Manual CONTROLS AND CONNECTORS CABLE CONNECTIONS: Turn off your computer before performing the procedure below. 1. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port. 2. Connect one end of the 24-pin DVI-D cable (Dual in...
Page 11 - ADJUSTING THE VIEWING ANGLE; the monitor’s angle to your own preference.
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monit...
Page 12 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord s...
Page 13 - FRONT PANEL CONTROL; Power; function is activated.; Auto Adjust button:; When OSD menu is in off status, press this button to
User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Green — Power On mode. Orange — Off mode. • MENU / ENTER: 1. Activate the OSD menu or adjust the function settings and confirmation or 2. Exit OSD menu when in volume OSD statu...
Page 14 - HOW TO ADJUST A SETTING
User’s Manual HOW TO ADJUST A SETTING OSD Diagram OSD Description Brightness adjustment: Select the 「 Brightness 」 option on the 「 Main Menu 」 . Enter the option and adjust the level. Contrast adjustment: Select the 「 Contrast 」 option on the 「 Main Menu 」 . Enter the option and adjust the level. Ho...
Page 15 - OSD Diagram
User’s Manual OSD Diagram OSD Description Clock adjustment: Select the 「 Clock Adjustment 」 option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. Phase adjustment: Select the 「 Phase Adjustment 」 option to reduce the horizontal flicker of character...
Page 18 - PLUG AND PLAY
User’s Manual OSD Diagram OSD Description Recall the factory settings: Select the 「 Factory Preset 」 option to reset to the monitor’s default setting. This will erase the current settings. Enter the option and select On or Off. Input Setting: Select the 「 Input Setting 」 option to change between the...
Page 19 - Q & A FOR GENERAL DEFECTIVE
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL DEFECTIVE PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the V...
Page 20 - ERROR MESSAGE & POSSIBLE SOLUTION; CABLE NOT CONNECTED :
User’s Manual ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuita...
Page 21 - APPENDIX; SPECIFICATIONS
User’s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD Size 48.2cm(19.0") Pixel pitch 0.294mm(H) x 0.294mm(V) LCD Panel Brightness 300cd/m 2 (Typical) Contrast 700:1 (Typical) Viewable angle 150 ° (H) 135 ° (V) Response time 8 ms Video R,G,B Analog Interface Digital ( Dual-Input Mode...
Page 22 - CONNECTOR PIN ASSIGNMENT
User’s Manual CONNECTOR PIN ASSIGNMENT 15 - Pin Color Display Signal Cable: 1 5 6 10 11 15 PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Ground 3. Blue 11. Ground 4. Ground 12. DDC-Serial Data 5. Ground 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Grou...
