Page 2 - User’s Manual; FCC Class B Radio Frequency Interference Statement; Reorient or relocate the receiving antenna.; CANADA
User’s Manual OSD[4.39] Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant ...
Page 3 - RECYCLING INFORMATION; For more information, please visit
User’s Manual RECYCLING INFORMATION We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable material...
Page 4 - TABLE OF CONTENTS
User’s Manual TABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 5 PRECAUTIONS................................................................................................. 5 SPECIAL NOTES ON LCD MONITORS ...............
Page 5 - SAFETY NOTICE; Only use attachments/accesories specified by the manufacturer.; PRECAUTIONS; will protect the monitor from damage due to power surges.
User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. Th...
Page 6 - SPECIAL NOTES ON LCD MONITORS; less such as a missing pixel or a pixel lit all of the time.
User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappea...
Page 7 - BEFORE YOU OPERATE THE MONITOR; FEATURES; LCD Monitor
User’s Manual BEFORE YOU OPERATE THE MONITOR FEATURES • 39,6cm / 15.6” Wide Screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • GP Green Product • Ergonomic Design • Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following ...
Page 8 - INSTALLATION INSTRUCTIONS; INSTALL; Figure.1. Installing and Removing the Base; POWER
User’s Manual INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the b...
Page 9 - SETTING THE MONITOR ON THE WALL; Remove the 2 screws so that the stand base can be removed.; WALL MOUNTING THE MONITOR:; Locate your ideal Monitor position on the wall.
User’s Manual SETTING THE MONITOR ON THE WALL DISSEMBLING THE STAND BASE: 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor. 3. Remove the 2...
Page 10 - MAKING CONNECTIONS; CONNECTING TO A PC
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 2. Plug one end of the AC power cord to the LCD monitor’s AC input so...
Page 11 - ADJUSTING THE VIEWING ANGLE; monitor’s angle to your own preference.
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monit...
Page 12 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power co...
Page 13 - FRONT PANEL CONTROL; Adjust
User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Green — Power On mode. Orange — Power Saving mode. • MENU / RETURN: Turn the OSD menu on/off or return to the previous menu. • Adjust ▲▼ : 1. Adjust Brightness when the OSD is ...
Page 14 - Resolution; to ship your monitor.
User’s Manual Resolution 640x400@70Hz ↔ 720x400@70Hz 640x480@60Hz ↔ 720x480@60Hz 1024x768@70Hz ↔ 1280x768@70Hz 1280x768@60Hz ↔ 1360x768@60Hz 1360x768@60Hz ↔ 1366x768@60Hz ** The screen resolutions available will depend on the purchased model. NOTES: • Do not install the monitor in a location near he...
Page 15 - HOW TO ADJUST A SETTINGS; BRIGHTNESS/ CONTRAST
User’s Manual HOW TO ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. Select 「 CONTRA...
Page 17 - PLUG AND PLAY
User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its di...
Page 18 - Q & A FOR GENERAL PROBLEMS; Properties
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if the...
Page 19 - Addendum related to Windows 7; Make sure your video card can run Windows 7.
User’s Manual Addendum related to Windows 7 When you encounter display problem under Windows 7, you need to do the following: 1. Make sure your PC computer (Hardware requirement) can support Windows 7. 2. Make sure your video card can run Windows 7. 3. If your video card can support Windows 7, need ...
Page 20 - ERROR MESSAGE & POSSIBLE SOLUTIONS; CABLE NOT CONNECTED:; Check the signal-cable’s connection pins for damage.; MODE
User’s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected. If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to uns...
Page 21 - APPENDIX; SPECIFICATIONS
User’s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD Size 39,6cm / 15.6” Diagonal LCD Panel Pixel pitch 0.252mm(H) x 0.252mm(V) H-Frequency 24KHz – 64KHz Video V-Frequency 56 – 75Hz Display Colors 16.7M Colors Max. Resolution WXGA 1366 x 768 @60Hz Plug & Play VESA DDC2B TM ON Mode ...
