Page 2 - User’s Manual; FCC Class B Radio Frequency Interference Statement; Reorient or relocate the receiving antenna.; CANADA
User’s Manual Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15...
Page 3 - Ergonomics; Electrical safety; Emissions; Low electromagnetic fields surrounding the display; Ecology; and
User’s Manual Congratulations! The product you have just purchased carries the TCO’06 Media Displays label. This means that your display is designed and manufactured according to some of the strictest performance and environmental criteria in the world. The manufacturer of this display has selected ...
Page 4 - Recycling Information; For more information, please visit
User’s Manual Recycling Information We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable material...
Page 5 - TABLE OF CONTENTS
User’s Manual TABLE OF CONTENTS SAFETY NOTICE ...................................................................................................... 6 PRECAUTIONS..................................................................................................... 6 SPECIAL NOTES ON LCD MONITORS .......
Page 6 - SAFETY NOTICE; could void the user's authority to operate the equipment.; PRECAUTIONS; will protect the monitor from damage due to power surges.
User’s Manual SAFETY NOTICE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. Th...
Page 7 - SPECIAL NOTES ON LCD MONITORS; less such as a missing pixel or a pixel lit all of the time.
User’s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappea...
Page 8 - BEFORE OPERATING THE MONITOR; FEATURES; LCD Monitor
User’s Manual BEFORE OPERATING THE MONITOR FEATURES • 28” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1920 X 1200@60Hz • EPA ENERGY STAR ® • Ergonomic Design • Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product pack...
Page 9 - INSTALLATION INSTRUCTIONS; INSTALL; Figure.1. Installing and Removing the Base; POWER
User’s Manual INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Turn the monitor over and set it upside down. 2. Align the monitor to the slots on the stand. 3. Please note that the longer edge of the stand should be facing forward. 4. Securely moun...
Page 10 - MAKING CONNECTIONS; CONNECTING TO A PC
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port. 2. Connect one end of the HDMI to DVI-D cable (Dual input mode op...
Page 12 - ADJUSTING THE VIEWING ANGLE; monitor’s angle to your own preference.
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, and then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You may adjust the monitor f...
Page 13 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS; CONTROL PANEL BUTTONS:
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 5). By changing these settings, the picture can be adjusted to your personal preference. • The power cor...
Page 14 - FRONT PANEL CONTROL; Power
User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF monitor’s power. • Power Indicator: Blue — Power On mode. Orange — Power Saving mode. • MENU / RETURN: 1. Turn the OSD menu on/off or return to the previous menu. 2. Exit OSD menu when in volume OSD status. • Adjust...
Page 15 - HOW TO ADJUST A SETTINGS; INPUT SETTING
User’s Manual HOW TO ADJUST A SETTINGS BRIGHTNESS/CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. Select 「 CONTRAS...
Page 18 - PLUG AND PLAY
User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its di...
Page 19 - Q & A FOR GENERAL PROBLEMS
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the Vi...
Page 20 - System; option in the monitor menu is
User’s Manual No sound is outputted from monitor’s built-in speaker *Make sure PC audio output cable is connected to screen ＇ s LINE IN port (or AUDIO IN port). *Make sure the sound volume adjustment can be clearly identified. *Make sure the System > Silence option in the monitor menu is on. *Whi...
Page 21 - ERROR MESSAGE & POSSIBLE SOLUTIONS; RECOMMENDED AND SUPPORTED TIMING MODE:
User’s Manual ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT: Your computer has been set to unsuitab...
Page 22 - APPENDIX; SPECIFICATIONS
User’s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD Size 28” (27.5" viewable) LCD Panel Pixel pitch 0.309mm(H) x 0.309mm(V) H-Frequency 24KHz – 80KHz Video V-Frequency 56Hz– 75Hz Display Colors 16.7M Colors Max. Resolution WUXGA 1920 x 1200 @60Hz Plug & Play VESA DDC2B TM ON M...
