Gymax GYM03862 - User Manual

290x210 7-22

USER'S MANUAL

PTC Fan heater

Please read this Instruction carefully before use
I. Functional charactcnst1c

s

』

I. Strong air supply structure, with strong and soft hot air, air oscillated at a large angle as well as the

even heat distribution

2. High-quality PTC heating device, whtch can automatically fine tune the power, according to the change

of ambient temperature. Non-oxidizing property makes it last longer and more environmentally friendly

3. Two-stage power available (?SOW/I SOOW) wilh adjustable heal

4. Double overheat protect10n dev1ee for safe use.

几Main technical parameters

』

I. Rated voltage: 120V--

2. Rated frequency: 60Hz

3.R叩ng power, High-gear for 1500W Low-gear for 750W

4. Oscillating angle: 60 degrees

5. Applicable environment: -4 r�95下(-20'C-+35

°

C) , relative hum汕ty shall be less than 85%;

皿Safety而可石i司

1. The fan heater should be placed in a suitable place. Do not place the fan heater under the power socket

2. It is strictly prohibited to place flammable or explosive materials around the fan heater. Do not use the

fan heater in place

、

full of flammable gas and dust. Keep it away from heat sources, such as fire and

heating.

3. The fan heater should be placed on a flat and solid table or floor. Do not use the fan heater around the

bathtub, nozzle or swimming pool

4. This device should not be used by people (including children) who are physically, sensuously or

mentally deficient, or who lack experience and knowledge. Unless they are supervised or instructed

by the person responsible for their safety regarding the use of the product

5. Children should be lookcd after to ensure that they do not play with this product

6. The power cord should be placed well to prevent the fan heater from being tripped when walkmg

7. TI1e power cord should not touch the mesh enclosure (or air outlet) to avoid scalding the power cord at

high temperatures

8. Do not hang dripping clothes above the fan heater or expose it to rain to avoid the risk of electnc

leakage. It is strictly forbidden lo cover the combustibles and wet clothes on the fan heater mesh

enclosure to avoid the risk of firc or electric shock.

9. The power supply voltage and frequency should meet the main technical parameters of the fan heater

10. The meter and indom line should be able to load the power consumption of the fan heater. In addition,

the loads when it is uscd simultancously with other applianecs should be considered.

11. When the fan heater is working, it is forbidden to touch the mesh enclosure(or the air outlet) to

prevent the skin from being burnt at high temperature

12. Do not remove the mesh enclosure.

13. The power cord should be unplugged when it is shut down. Be careful when removing the plug. Do

nut pull lhe power curd by hands. The fan heater should be lumed oITbefore unplugging lhe power

plug

14. When not in use for a long time, the machine should be packed to prevent dust from entering the

machine, and it should be stored in a dry and ventilated place

15. Do not use this product when there are unattended children, animals or the people who are disabled m

action and lack self-control

16. Please contact the after-sales service point or find a professional to repair it 1f the power cord of this

Welcome to visit our website and purchase our quality products!

Your suggestions and comments for COSTWAY are really important to us!

We sincerely solicit you to go back to our shop and leave a good rating in just a

simple click. It would be quite encouraging if you could kindly do so like below:

** * * *

Great products so far

February 24, 2019

Great products so far. Fast delivery, easy setup, and working without any issues

With your inspiring rating, COSTWAY will be more consistent to offer you

EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California

UK office: Ipswich

We would like to extend our heartfelt thanks to

all of our customers for taking time to assemble

this product and giving us valuable feedbacks.

7

machine is damaged or other faults occur. It is strictly forbidden to remove the parts of the product

and replace accessories that do not meet tl1e safety regulations

17. It is stnctly forbidden to insert conductive objects into the front and rear mesh enclosure (or air outlet)

to avoid the risk of electric shock caused by touching electrical components

18. For safety reasons, the unattended fan heater in the work must be shut dO\vn to avoid accidents

19 The fan heater stored JU the cold env11onment below-4T (-20

°

C) should be wauned to a temperalllfe

above-4

°

F C-20

°

C) before being started to avoid the material changes due to low temperature and

afTect the safety u「the product

20. Keep the back air inlet and the air outlet open, and do not cover them with foreign objects

' ' 一一己一 ．

一

!Y�Structural_<l1ag11t虫

shell

Base

,\ir outlet

adjusting

Oscillating

A

订

intak

霆��

Switch of gear: Three

Temperature control

gears: cold air, bottom heat

knob: To adjust the

and nigh heat

ambient temperature of

ring heating

勹

Spin button: To enable or

disable

the

rotation

function

丛．心1nction,,oper�tionaUnstn1cSfOll�

I. Place the fan heater in the appropriate position by referring to the safety instructions, and plug the

power cord into the power socket.

三

Switch of gear: Three

gears: cool, warm, hot

wind

G

Temperature

control

knob: To adjust the

ambient temperature of

ring heating

Q

Spin button: To enable or

disable

the

rotation

function

I. Plug the power cord into a socket with a rated current greater than JOA by referring to the safety

mstruct1ons

2. Rotate the temperature control knob clockwise to the maximum posit10n. (After adjusting to the

suitable and comfort temperature, put the temperature control knob at the OFF position, and the

working tempera1ure at this time is the ambient temperature you set; there will be a sound of "click"

when the temperature control is closed).

3. Switch operation instructions: Rotate the switch of gear, and when the knob is rotated to the O pos

巾

on,

the product is OFF; when the knob is rotated to the �position, the fan starts to work and blows cold air,

and the work indicator lights up synchronously; the knob is rotated to tl,e I position ----- start 750\V

low-heat air supply; the knob is rotated to the ll position ----- start 1500\V high-heat air supply;

0----closed indication

书----cold air indication

I-----750W low-heat indication

II----1500W high-heat indication

4. Shutdown: First tum the switch knob to the�cold air position, work for about 30 seconds, so that

the heat in the fan heater can be completely dissipated. Then, tum the knob to the O position, the

indicator light goes out, and then turn the temperature control knob to the minimum pos山on, unplug

the power cord plug

凶

-

..

�epai,: a'!d_maintenanc�

I. Before the repair and mamtenance, please unplug the power cord and wait for the fan heater coolmg

down.

2. When the external surface area is covered with dust, wipe it with a soft cloth: when the surface is too

dirty, mix it with water below l 22r (50

°

C) and neutral detergent, then wipe it with a cloth

3. Do not use gasoline, thinner, diluent or any substances that may damage the external surface when

cleanmg.

4. The fan heater should be cooled down, dried and packaged before storing, and should be stored in a dry

and ventilated place

6

3

4

5