Page 2 - CONTENTS
2 CONTENTS ________________________________________________________________________ 3 Set-up and safety 4 Overview Operating elements of the stereo systemThe back of the stereo systemThe remote control 9 Connection and preparation 12 Settings Setting the clockTuning to radio stationsStoring radio st...
Page 4 - OVERVIEW; Operating elements of the stereo system; Operating controls on the front; Operating controls on the top of the
4 OVERVIEW _______________________________________________________________________ Operating elements of the stereo system Operating controls on the front ON/OFF Switches the stereo system to and fromstand-by mode. O Infrared receiver for remote control sig-nals. • Stand-by indicator. PHONES Headpho...
Page 5 - AUX operation; Radio mode; CD mode; ıı
ENGLISH 5 ENGLISH OVERVIEW __________________________________________________________________________________ AUX operation AUX Selects the input source » A U X « (external device). Radio mode TUNER Selects the » T U N E R « input source. BAND Selects the frequency band » FM « or » M W «. ıı s6 Hold...
Page 6 - The back of the stereo system; General instructions for laser devices
6 OVERVIEW __________________________________________________________________________________ The back of the stereo system ANTENNA FM Socket for the rooftop antenna EXT or the wire antenna supplied. ANTENNA AM Antenna terminals for the wire antenna EXT supplied. OPTICAL Digital output for copying a...
Page 7 - The remote control
ENGLISH 7 ENGLISH OVERVIEW __________________________________________________________________________________ The remote control 9 Switches the stereo system to and from stand-by mode. TIMER SNOOZE For setting the switch-on and sleep timers. CLOCK For setting the clock. 1. . . 0, +10 Numeric keys fo...
Page 8 - ľľ
8 OVERVIEW __________________________________________________________________________________ DSC Selects the sound settings. MUTE Switches the loudspeaker on and off again. X-BASS For boosting the bass. AUX Selects the input source » AUX «. CD ı I I In CD mode – starts CD playback, pauses playback....
Page 9 - CONNECTION AND PREPARATION; Connecting the antenna; Connecting the loudspeakers
ENGLISH 9 ENGLISH CONNECTION AND PREPARATION _______ Connecting the antenna 1 Insert the rooftop antenna in the » ANTENNA FM EXT « socket on the stereo system. Note: If no rooftop antenna system is available, use the auxiliary antenna supplied.This antenna provides reasonably good reception of local...
Page 10 - Connecting a digital recording device; Connecting headphones; Connecting the power cord
10 CONNECTION AND PREPARATION _______________________________________ Connecting a digital recording device 1 Use an OPTICAL cable to connect the » DIGITAL OPTICAL OUT « jack on the stereo system to the appropriate jack on the external device (e.g. MD orCDR). Note: This socket enables you to record ...
Page 11 - ENGLISH; How to connect plug
CONNECTION AND PREPARATION _______________________________________ ENGLISH 11 Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in thistype of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which sh...
Page 12 - Inserting the batteries in the remote control
12 CONNECTION AND PREPARATION _______________________________________ Inserting the batteries in the remote control 1 Open the battery compartment by pushing down the lid of the batterycompartment. 2 When inserting the batteries (micro type, for example AA, R6, UM3),observe the polarity marked on th...
Page 13 - SETTINGS; Setting the clock; Automatically updating the time; C O N
ENGLISH 13 SETTINGS ____________________________________________________________________________ Setting the clock When the stereo is connected to the mains supply and the time has not been set,the time and »CLOCK« flash in the display. 1 With the device switched off, press and hold down » CLOCK «. ...
Page 15 - Deleting settings; F N T A Y
ENGLISH 15 SETTINGS ____________________________________________________________________________________ ... using a manual search 1 Press » TUNER « to switch on the device. – Display: the waveband (» FM « or » MW «) and the frequency. 2 Select the frequency band (FM or MW) by pressing the » TUNER B...
Page 16 - GENERAL FUNCTIONS; Switching on and off; Adjusting the volume; Muting; M T E; V L
16 GENERAL FUNCTIONS _________________________________________ Switching on and off 1 Press » ON/OFF « on the device or » 9 « on the remote control to switch on the stereo system from stand-by mode.– The last input source used is automatically selected. Note: The following buttons on the device can ...
Page 17 - Sound settings; Boosting the bass
ENGLISH 17 GENERAL FUNCTIONS ______________________________________________________________ Sound settings You can select between five different sound settings:You can select between » POP S«, » ROCK «, » C L A S SI C«, » JAZZ« and » FLAT«according to the type of music you are listening to. 1 Select...
Page 18 - TUNER MODE; Selecting the Tuner as the source; Selecting a preset station; Stereo/mono reception
18 TUNER MODE ________________________________________________________________ Selecting the Tuner as the source 1 Select the input source using the » TUNER BAND « button. – Display: the radio station last selected. Selecting a preset station 1 Select the frequency band (FM or MW) by pressing the » ...
Page 19 - Searching for RDS stations; Calling up RDS information; R S O N
ENGLISH 19 TUNER MODE _____________________________________________________________________________ RDS station service RDS (Radio Data System) is an information system which is transmittedadditionally by most FM stations.If the device is currently receiving an RDS station, it displays the station n...
Page 20 - RDS time; Radiotext; N C T; M I L O; N R T
20 TUNER MODE _____________________________________________________________________________ RDS time Some stations transmit RDS time information. 1 To call up RDS time information, keep pressing » DISPLAY « on the remote control until »CT« appears in the display.– After a short time you will see the...
Page 21 - CD MODE; Basic CD mode functions; Selecting the CD input source; Inserting a CD; O P E N; N D I C
ENGLISH 21 CD MODE ___________________________________________________________________________ Basic CD mode functions The stereo system is suitable for music CDs displaying the logo shown here orfor CD-Rs with audio data.Always keep the CD compartment closed to prevent dust from collecting on thela...
Page 22 - CD playback; Selecting a different track; Repeating the current track
22 CD MODE ____________________________________________________________________________________ CD playback 1 Press » CD ı I I « to start playback. – Playback begins with the first track.– Display: » ı «, the current track number and the elapsed playing time of the track. Playback stops at the end o...
Page 23 - Special CD mode features; Searching for a passage within a track; Playing back tracks in random order
ENGLISH 23 CD MODE ____________________________________________________________________________________ Special CD mode features Searching for a passage within a track 1 During playback, press » 5a ľľ « or » ıı s6 « and hold it down until you find the desired passage.When » 5a ľľ « or » ıı s6 « are ...
Page 25 - Selecting and storing tracks and playing back the; Deleting the track memory
ENGLISH 25 CD MODE ____________________________________________________________________________________ Creating a track memory – playing back tracks inselected order You can create a track memory of up to 20 tracks for the current CD in anyorder you choose and then play them back in that sequence. ...
Page 26 - TIMER MODE; Setting the switch-on timer
26 TIMER MODE __________________________________________________________________ Your stereo system has two timer modes:– The switch-on timer, which switches the stereo system on and off at a pre-set time.– The sleep timer, which switches off the stereo system at a pre-set time. Switch-on timer Sett...
Page 27 - Interrupting and repeating the timer function; Sleep timer; Setting the sleep timer; Ending the sleep timer
ENGLISH 27 TIMER MODE ______________________________________________________________________________ Interrupting and repeating the timer function 1 You can interrupt the timer by pressing » TIMER/SNOOZE « on the device. – After approximately 5 minutes, the timer switches the device on again. Note: ...
Page 28 - INFORMATION; Cleaning the CD unit
28 INFORMATION _____________________________________________________________ Cleaning the CD unit If the device is unable to scan CDs perfectly, use a standard commercially available cleaning CD toclean the laser optics. Other cleaning methods may damage the laser optics.To clean CDs use a lint-free...
Page 29 - Rectifying minor problems
ENGLISH 29 INFORMATION __________________________________________________________________________ Rectifying minor problems Not every kind of sound interference is caused by a defect in your HiFi system.Impairment can also be caused by leads having been accidentally pulled out, damagedCDs and worn o...
Page 30 - Grundig AG; GRUNDIG Service
30 Grundig AG • Beuthener Str. 41 • D-90471 Nürnberg • http://www.grundig.com INFORMATION __________________________________________________________________________ GRUNDIG Service GRUNDIGKundendienst NordKolumbusstraße 14 D-22113 Hamburg +49/40-7 33 31-0 GRUNDIG BELUX N.V.Deltapark, Weihoek 3, Unit...
