Grundig GRP6000 - Manual

8 The remote control Switches the Receiver/Player in/out of stand-by mode. Press and hold toinvoke Low Power Standby. In this mode the Receiver/Player uses less than1W of electricity. Numeric keys for various inputs. Switches to the next channel, position step by step. Access main menu. Enter / Exit...

Connecting the television and VCR … … using aerial (RF) cables 1 Connect the cable of your TV aerial to the » Aerial In « socket on the Receiver/Player. 2 Connect the short aerial from the » Loop Through « socket to the » RF IN « socket, both on the Receiver/Player. 3 Connect the long aerial lead fr...

Start up Once the mains has been connected to the receiver, the receiver will take up tofifteen seconds to perform system checks, during which the Receiver/Player willnot respond to any remote control or button presses. The Receiver/Player cannotbe brought out of standby until these checks are compl...

12 TV Setup You can choose how pictures are displayed on your TV. 1 Press » «, select the » SETUP « menu and press » OK « 2 Now select » TV SETUP « and press » OK «. 3 Now choose the type of TV screen you have. Use » # «/» $ « and choose » 16:9 « for a widescreen TV or » 4:3 « for a conventional one...

14 TV Guide The TV guide shows details of programs of programs whilst allowing you to watcha smaller picture of the selected service. To access the guide press » «. Move up and down the channel listings using » ! «/» " « keys, you can move a page at a time by using » Pr+ «/» Pr- « keys. Find out...

Service List This list contains all the services that were tuned in during an Auto tune or Manualtune. You can delete services that you do not want or you can add them to your Favourite List for easier selection. 1 Press » «, select » SERVICE LIST « and press » OK «. 2 Select a service using » ! «/»...

You can use PARENTAL CONTROL to create viewing restrictions on your receiver. First create your own Personal Identification Number (PIN) as shown inthe Advanced Setup section of this guide. You can now create censorship levelsor Lock out channels completely. Press » «, select » PARENTAL CONTROL « fr...

18 From time to time new services are launched which may require your receiver tobe upgraded with new software before you can use them. Sometimes newfeatures may be introduced to enhance your receiver. Notification This menu is automatically displayed when a new “Over-Air-Download” isdetected after ...

Technical information details The technical information screen displays the hardware and software informationof the receiver. This information may be required by the service agent or servicecall operator. 1 Press » «, select » SETUP « and press » OK «. 2 Select » TECHNICAL INFORMATION « and press » ...

20 Adapting Disc mode to the television set Selecting the screen format of your television set If your television has a 16:9 screen format, then select the »16 : 9« setting. Thesedefault settings also have an influence on the settings in the »Picture« menu item.On a conventional television set with ...

21 DVD/VIDEO CD PLAYBACK B gen no disc DVD and video CD features You can recognise DVDs, s-video CDs and video CDs by the logo on the label.Depending on the contents of the DVD, s-video CD or video CD (films, video clipsetc.), they may carry one or more titles. Each title may contain one or more cha...

DVD/VIDEO CD PLAYBACK 22 DISC MODE gen n gen ľ gen II gen . ... gen Ø gen ə ǵ X e n a 0: 0 2: 4 5 0 3 0 6 TITLE CHAPTER PRO 0: 0 2: 4 5 0 3 0 6 TITLE CHAPTER PRO 0: 0 2: 4 5 0 3 0 6 TITLE CHAPTER PRO 5 5 Inserting a DVD/video CD 1 Press » « on the Receiver/Player.– The disc tray opens and the player...

Selecting titles or chapters If a DVD or video CD contains several titles and/or chapters, you can select fromamong them. The » « and » « boxes in the info line will tell you whether a DVD contains more than one title or chapter. 1 Call up the contents of the DVD/video CD by pressing » «. – If the D...

24 Additional playback functions Note: The sound is muted with the “frame-search”, “slow-motion” and “freeze-frame” functions.Some functions cannot be selected. This depends on the DVD/video CD beingused. Video strobe With this effect, individual video frames of the DVD are shown on the screen after...

Repeating a chapter or a DVD These functions repeat the currently running chapter or the entire DVD. 1 During playback, press and hold down » «. – » « appears on the television screen, the chapter is repeated. 2 During playback, press » « and afterwards press it again. – » « appears on the televisio...

Changing the dubbed language This setting switches out of the preset dubbed language, when the DVD offersalternatives. 1 During playback, press » «. – Display: for example » de 2/3 : 5.1« appears briefly, and the current dubbed language is displayed. 2 To set the desired language, press » « repeated...

Preparation 1 Switch on the television and select the channel for the Receiver/Player. 2 If a HiFi system is connected to the Receiver/Player, switch on the HiFi systemand select the appropriate audio input for the Receiver/Player. 3 Press » « to switch on the Receiver/Player. Press » « to switch to...

Audio CD features An audio CD is identified by this logo. Audio CDs contain only music recordings. They can be played in the normalmanner on a HiFi system. Before playback Preparation 1 Switch on the television and select the channel for the Receiver/Player.– With this you can see the Receiver/Playe...

Selecting a different track 1 To select the next track, press » ! « during playback. 2 Return to the beginning of the track by pressing » " « once. 3 To select previous track, press » " « twice. 4 To select a track directly, enter the one or two-digit number of the track with» 1 … 0 « and pr...

30 With the parental lock you can: – Lock the disc tray of the Receiver/Player. – Block scenes which are not appropriate for children from DVDs or video CDs,orselect alternative scenes. Locking and releasing the disc tray of theReceiver/Player Locking the disc tray of the Receiver/Player 1 Press » «...

Authorising the contents of a DVD Films on DVD may be wholly or partially unsuitable for children. Such DVDscontain information which identifies these scenes, providing them with ratingsfrom 1 to 8. You can select one of the ratings and thereby authorise alternativescenes for playback. 1 Press » « t...

32 Surround sound settings You can select different 3D surround sound effects including virtual Dolbysurround sound. Dolby virtual surround is a process which appears to providesound all around the listener via only two loudspeakers. Note: You can select these settings if you have connected analogue...

Selecting the picture format for your television This setting is dependent on the chosen TV format, see the “Selecting the screenformat for your television: chapter. If 4:3 format is selected, you can set:»Pan&Scan« for wide-screen playback using the full height of the screen, but withthe left a...

PICTURE SETTINGS 34 Selecting filter functions 1 Press » « to call up the main menu. 2 Select »Picture« menu and press » OK «. 3 Select »Extended settings« and press » OK «. Note: For further operation, see the following sections, each one starting fromStep 1 . Selecting the horizontal filter This s...

Settings in the »Installation« menu 1 Press » « to call up the main menu. 2 Select »Installation« and press » OK «. Note: For further operation, see the following sections, each one starting fromStep 1 . Software status and dealer menu Here you can get information about your Receiver/Player’s softwa...

CUSTOM SETTINGS 36 Language settings 1 Press » « to call up the main menu. 2 Select »Disc preferences« and press » OK «. Note: For further operation, see the following sections, each one starting fromStep 1 . Selecting the dubbed language If several languages are available on the current DVD, the so...

Connecting to a digital multi-channel amplifier The digital multi-channel sound of a DVD can best be decoded and played witha multi-channel audio/video amplifier (Dolby*digital decoder or DTS). 1 Plug a standard phono cable into the » DIGITAL AUDIO OUT « socket of the Receiver/Player and into the ap...

USING EXTERNAL DEVICES 38 Adapting the digital output to a digital multi-channelamplifier With this you choose whether the decoder signal is processed in the unit or fedunchanged to the digital output. With internal decoding, there is a stereo signal(PCM) at the digital output. 1 Press » « to call u...

2 Select the desired value (»Original«, »96 kHz« or »48 kHz« with » " « or » ! « and confirm with » OK «. – Use »Original« for DVDs with a 96 kHz sound signal.The sound signal is output at the » AUDIO OUT L R « sockets and – if supported by the DVD – at the » DIGITAL AUDIO OUT « socket. – Use »9...

Technical data This product fulfils the European directives 89/336/EEC, 73/23/EEC and 93/68/EEC. This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore theinternational safety regulation IEC 60065. You may not open the Receiver/Player. The manufacturer accepts no liabili...

INFORMATION 42 General instructions for laser devices Your system is a CLASS 1 LASER PRODUCT. This means that the laser is designed in such away as to ensure that the maximum permissible emission value cannot be exceeded underany circumstances. Caution: If operating devices or methods other than tho...

43 Rectifying minor problems Not every picture or sound problem is caused by a defect in your Receiver/Player.Impairment can also be caused by leads having been accidentally pulled out,damaged DVDs/CDs and worn-out batteries in the remote control.If the following measures do not bring about satisfac...

44 GRUNDIG Service GRUNDIG BELUX N.V.Deltapark, Weihoek 3, Unit 3G B-1930 Zaventem +32/2-7 16 04 00 GRUNDIG UK LTD.Elstree Way, Borehamwood, Herts, WD6 1RX GB Großbritannien/Great Britain +44/208-3249400 Technical ServiceUnit 35, Woodside Park, Wood StreetRugby, Warwickshire, CV21 2NP Großbritannien...

Grundig AG • Beuthener Str. 41 • D-90471 Nürnberg • http://www.grundig.com 267109417002