Page 2 - Introduction; New Zealand
- 1 - Introduction Thank you for buying this Grundig product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit‟s many features a...
Page 3 - Contents
- 2 - Contents Introduction ………………………………… ..….………1 Safety Instructions ……………………………………...3-4 Unpacking ………… ……………… ……… …… ..…..…5 Wall Mount Bracket Installation …………….….……..……6 View of TV ………..………………………….………….…7-8 Remote Control …………………..………………….…9-12 Installation and Connection …………….…………..…….13 TV...
Page 4 - Safety Instructions
- 3 - Safety Instructions 1. Please read these operating instructions carefully before you operate this unit. 2. Do not use this television near water. 3. Clean with a dry cloth only. 4. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 5. Do not insta...
Page 6 - Unpacking
- 5 - Unpacking ___________________________________________ Please make sure that the following items are included with your LCD TV. If any item is missing, please contact the warranty line. TFT LCD TV Remote Control Operation Manual DC Adaptor Power Cord RCA Cable Car Cord
Page 7 - Wall Mount Bracket Installation
- 6 - Wall Mount Bracket Installation 1. Place the “LCD TV” on a solid surface. Use soft material to place over the front screen to avoid any damage. 2. Remove the 5 screws ( ①②③④⑤ ) from the unit and take away the stand (Refer picture 1). (Picture 1) (Picture 2) 3. Using the plastic cover that came...
Page 8 - View of the TV; Front View
Page 10 - Remote Control
Page 11 - Remote Control Keys Function
- 10 - Remote Control Keys Function 1. Power Button: Press the Power Button to switch the TV on or off. 2. Numeric Buttons : Press the Numeric Buttons to select a channel or select a page in the Teletext. 3. CH.LIST Button: Press the Channel List Button to show the channel list. 4. Aspect Button : P...
Page 13 - Remote Control Battery Installation
- 12 - Remote Control Battery Installation Replace battery by following the below steps: The remote control requires two AAA batteries. 1. Open the battery cover as shown below: 2. Install the batteries into the battery tray. 3. Close the battery cover Caution: 1. Keep the batteries out of the reach...
Page 14 - Installation and Connection; Connect the LCD TV
- 13 - Installation and Connection Connect the LCD TV 1. Connect the TV RF source to the RF IN port. TVRF signal including: Receiving antenna /satellite TV/CATV net. You can use 75Ω coaxial cable to connect the outdoor antenna. Outdoor Antenna Connection: Use 75Ω coaxial cable plug or 300-75Ω impeda...
Page 15 - TV Basic Operation; Changing Channels
- 14 - 2. Connect the audio sources (including DVD and VCDR) to the Left and Right AUDIO Input. 3. Connect the video source to the VIDEO Input via the RCA cable for basic TV connection. 5. Insert the AC power into the DC adaptor, then connect the 12 Volt Input from the TV to its DC Output. 6. To use...
Page 16 - View Different Input Signal Sources; STORAGE
- 15 - previous or next channel or press the 0-9 Buttons to enter a channel number directly. 3. Press the Button on the remote control to return to the previous channel that was last viewed. 4. Press the P.MODE Button to cycle through the available video picture modes from the different options belo...
Page 17 - TV Channel Menu
- 16 - 3. Press the CH- or CH+ Buttons to select the previous page or press the 0-9 numeric Buttons for your desired page. Note: The first number should not be „0‟ or „9‟. TV Channel Menu The TV Channel Menu will give you access to the program functions i.e. Auto Scan, Program Edit and Signal Inform...
Page 20 - Skip
- 19 - To select the program edit settings press the ▲or▼ Buttons. See options below. Delete To delete a program or channel, press the Red Button and the DELETE mark will be displayed. Then press the Red Button again, to confirm and delete the current program. Rename To rename a program or channel, ...
Page 21 - PICTURE Menu
- 20 - will be displayed. This will set that channel to skip and you will not be able to search for this program. Press the Blue Button again to cancel the setting and the SKIP mark will disappear. FAV To set a program to your favourites list, press the FAV Button and this mark will appear next to t...
Page 22 - SOUND Menu
- 21 - Picture Mode To adjust press the ◄ or ► Buttons to scroll through the picture modes. Contrast Press the ◄ or ► Buttons to adjust the contrast . Brightness Press the ◄ or ► Buttons to adjust the brightness. Colour Press the ◄ or ► Buttons to adjust the colour . Sharpness Press the ◄ or ► Butto...
Page 23 - Sound Mode
- 22 - To enter the Sound Menu, press the LCD MENU Button and then press the ◄ or ► Buttons to select the SOUND Menu. Press the ▲ or ▼ Buttons to scroll through the settings in the Sound Menu. To return to the Main Menu, press the LCD MENU Button or to exit press the EXIT Button. Sound Mode To adjus...
Page 24 - TIME Menu; Clock
- 23 - TIME Menu To enter the Time Menu, press the LCD MENU Button and then press the ◄ or ► Buttons to select the Time Menu. Press the ▲ or ▼ Buttons to scroll through the settings in the Time Menu. To return to the Main Menu, press the LCD MENU Button or to exit press the EXIT Button. Clock To set...
Page 25 - OPTION Menu; Language
- 24 - Press the ◄ or ► Buttons to set the sleep time. This will set your TV to Standby Mode , if inactive for the selected amount of time; 240 min, 180 min, 120 min, 90 min, 60 min, 30 min, 20 min, and 10 min. Auto Sleep Press the ◄ or ► Buttons to set Auto Sleep to on or off. When the setting is s...
Page 26 - LOCK Menu; Lock Channel
- 25 - The default language is English. Audio Language Press the ◄ or ► Buttons to select the Audio language. The default language is English. Subtitle Language Press the ◄ or ► Buttons to select the Subtitle language. The default language is English. Country Press the ◄ or ► Buttons to select the c...
Page 27 - Change Password; Block Program; Parental Guidance; Hotel Lock
- 26 - Once this is set to on, the setting will be password protected. Change Password To change the password, press the ENTER or ► Button to select this option and a pop-up menu will appear to enter your new password. T he default password is “0000”. This will unlock any password protected features...
Page 28 - EPG Menu
- 27 - Lock Channel To set the Lock Channel Mode, press the ◄ or ► Buttons to turn it on or off. Set Source To set the Set Source, press the ◄ or ► Buttons to turn the lock on or off. Channel Number Based on whether DTV or ATV source is set, press the ◄ or ► Buttons to set the Channel Number to lock...
Page 29 - DVD PLAYER OPERATION
- 28 - The EPG (Electronic Programme Guide) Menu is used to look at what is being broadcast on a DTV or Radio channel. Press the EPG Button to access the EPG Menu, detailed program information of the channel currently being viewed will be displayed as well as a 7 day guide of is programmed. To see w...
Page 39 - MULTIMEDIA OPERATION
- 38 - MULTIMEDIA OPERATION To play files on your USB or SD/MMC card, insert the USB flash stick or SD/MMC card into the inputs provided. Then press the Input Button on remote control to select STORAGE or CARD source and enter into Multimedia Menu. See below the Menu options. Photo - Press the or Bu...
Page 40 - Multimedia Files Basic Operation; Other Operation; Headphone Operation
- 39 - Movie Press the or Buttons to select Movie Menu and then press the ENTER Button to enter the Menu. Press the or Buttons to select the file you wish to play. Press the EXIT Button to go back to previous Menu. Multimedia Files Basic Operation Please follow the DVD Basic Operations. Other Operat...
Page 41 - Issue
- 40 - Troubleshooting If you have any issues or queries about the functions of this TV, please check the below table as we have provided you with FAQs to assist with any issues. If this table is not of assistance, please contact the Grundig warranty line. DVD Player Issue Solution No Sound Check th...
Page 42 - TV
- 41 - TV Issue Solution No power Turn off the unit on the remote and at the wall socket. Pull out the power plug. Wait 60 seconds and then plug the power cord back in turn the power and unit back on. No picture Check that your cables and antenna have been connected firmly. Check that your DVD Setup...
Page 43 - Specifications
- 42 - Specifications Model No. GLCD2208HDV LCD Screen size 22 inch Screen format 16:9 Resolution 1680*1050 Contrast 1000:1 Brightness 300 cd/m² Display colours 16.7M View angle 160° (horizontal) / 160° (vertical) Response time 5 ms TV TV system DTV: DVB-T ATV: PAL I/BG/L/DK DTV decode Audio: MPEG2 ...
Page 45 - Display modes
- 44 - Display modes Resolution Horizontal Freq. (KHz) Vertical Freq. (Hz) 720x400 31.5 70 640x400 31.5 70 640x480(VGA) 31.5 60 640x480(VGA) 37.9 72 640x480(VGA) 37.5 75 800x600(SVGA) 37.9 60 800x600(SVGA) 47.2 72 800x600(SVGA) 46.9 75 1024x768(XGA) 48.4 60 1024x768(XGA) 56.5 70 1024x768(XGA) 60.0 7...
