Page 2 - CONTENTS
2 CONTENTS ____________________________________________ 3-4 Set-up and safety 5-6 Connection/Preparation 5 Mounting the table base 5 Connecting the loudspeakers 6 Connecting the antenna and the mains cable 6 Inserting batteries in the remote control 7-10 Overview 7 Connections on the television 8 Co...
Page 3 - ENGLISH; Clean the screen with a soft, damp cloth. Only use plain water.; INPUT
ENGLISH 3 SET-UP AND SAFETY ___________________________ Please note the following information when setting up your television set. This television set is designed to receive and display video and audiosignals.Any other use is expressly prohibited. The ideal viewing distance is 5 times the screen dia...
Page 5 - Mounting the table base; Place the stand on a level surface.; Connecting the loudspeakers; Use the speaker cable supplied to connect the »; SPEAKER; « terminals on the device to the »; CONNECTION/PREPARATION
ENGLISH 5 Mounting the table base Diagrams are contained in the assembly instructions enclosed with thetable base. 1 Fasten the two brackets to the table base using the hex socketscrews supplied. 2 Remove four fixing screws for each bracket from the back of thedevice. 3 Place the stand on a level su...
Page 6 - Connecting the antenna and the mains cable; Plug the mains cable into the wall socket.; Inserting batteries in the remote control; Open the battery compartment by removing the lid.; Environmental note
6 CONNECTION/PREPARATION __________ Connecting the antenna and the mains cable 1 Plug the antenna cable of the rooftop antenna into the »ANT IN« anten-na socket on the television. 2 Plug the mains cable supplied into the »AC IN« mains socket of the tele-vision. 3 Plug the mains cable into the wall s...
Page 7 - OVERVIEW; Connections on the television; Y Pb/Pr Audio In L R; IO
ENGLISH 7 OVERVIEW ____________________________________________ Connections on the television AV-2 Euro/AV socket (FBAS signal). AV-1 Euro/AV socket (FBAS signal, RGB signal). ANT-IN Antenna socket. S-VHS Video signal input for S-Video camcorder. AV-3 Video Video signal input for camcorder. AV-3 L R...
Page 8 - Controls on the television
8 Controls on the television Ǽ • Operation indicatorRed – standbyBlue – operation. OVERVIEW ____________________________________________ E l e g a n c e
Page 9 - The remote control; PIP; or; Ǹ Ƿ; OK; Switches between teletext and TV modes; ǷǷ
ENGLISH 9 OVERVIEW ____________________________________________ The remote control Ǽ Switches off the television set (stand-by). 1...0 Switches the television on from standby modeSelects channels directly. ? Displays the number and name of a station.Switches to double character size in teletext mode...
Page 11 - Setting television channels automatically; Changing stored channels; Deleting channels; SETTINGS
ENGLISH 11 Setting television channels automatically The television set is equipped with an automatic channel searchsystem.You start the search and can then sort the television channels intoyour order of preference.99 preset positions are provided, to which you can assign televisionchannels from the...
Page 12 - Sorting television channels; Skipping television channels
12 Sorting television channels 1 In the »Program table« menu, select the channel to be movedwith with » P+ «, » P- «, » Ǹ « or » Ƿ «. 2 Highlight the channel with » Ȅ « (green). 3 Select a new channel position by pressing » P+ «, » P- «, » Ǹ « or » Ƿ « and then press » Ȅ « to confirm. – All of the c...
Page 13 - Picture settings; Audio settings; Volume
ENGLISH 13 Picture settings 1 Press » i « to open the »MAIN MENU«. – The »MAIN MENU« appears. 2 Select »Picture« with » P+ « or » P- « and confirm with » OK «. – The »Picture« menu appears. 3 Select »Default settings« with » P+ « or » P- « and the setting »User« with » Ǹ « or » Ƿ «. 4 Select »Bright...
Page 14 - Concluding the settings
14 Dolby Virtual * Dolby Virtual is an innovative electronic solution, which is integra-ted in the television set and only requires the built-in speakers toproduce Dolby Surround effects. 1 Select »Sound mode« with » P+ « or » P- «. 2 Select »Dolby Virtual« with » Ǹ « or » Ƿ «. Stereo width Widens t...
Page 15 - Basic functions; TELEVISION OPERATION
ENGLISH 15 Basic functions Switching on and off 1 Press » IO « on the television set to switch it to standby. 2 Press » 1… 0 « or » P+ « or » P- « to switch on the device from standby mode. 3 Press the » Ǽ « button to switch the television to standby mode. 4 Press » IO « on the television set to swi...
Page 16 - Zap function
16 Picture settings You can select four different picture settings. 1 Select the desired picture setting from »User«, »Natural«,»Rich« or »Soft« with » z «. – You can alter the »User« picture setting, see the ”Picture settings” chapter on page 13. Audio settings You can select six different audio se...
Page 17 - Zoom function
ENGLISH 17 Zoom function This function enables you to enlarge the television or PC picture. 1 Press » i « to open the »MAIN MENU« menu. – The »MAIN MENU« menu appears. 2 Select »Picture« with » P+ « or » P- « and press » OK « to confirm.– The »Picture« menu appears. 3 Select »Brightness« with » P+ «...
Page 18 - Changing the picture format; Select the picture format with »; »Auto« format
18 Changing the picture format The television automatically switches to the 16:9 format if this format is detected via the Euro-AV socket. 1 Select the picture format with » E «. The selected picture format, for example »16:9«, appears on the screen.– You can choose between the following picture for...
Page 19 - PIP mode
ENGLISH 19 PIP mode PIP (picture in picture) allows you to watch an inset picture from asecond picture source in addition to the current channel.Other television stations, DVD players, video recorders or satellitereceivers can be used as video sources. They must be connected tothe input sockets on t...
Page 20 - TOP text or FLOF text mode; TXT; Normal text mode; TXT; Additional functions; Skipping the waiting time; TELETEXT MODE
20 TOP text or FLOF text mode 1 Press » TXT « to switch to teletext mode. 2 You can directly select teletext pages with » 1. . . 0 «. Note: At the bottom of the screen, you will see an information lineconsisting of a red, green and, depending on the station, yellow and blue text field. Your remote c...
Page 22 - Convenience functions with the »Features« menu; Changing the menu language; Entering the switch-off time for the sleep timer; CONVENIENCE FUNCTIONS
22 Convenience functions with the »Features« menu 1 To open the »MAIN MENU« press » i «. 2 Select »Features« with » P+ « or » P- « and confirm with » OK «. Note: Further operation is explained in the following sections. Changing the menu language 1 Select »Menu Language« with » P+ « or » P- « and co...
Page 23 - USING EXTERNAL DEVICES; High definition – HD ready; « socket or »; With a digital audio/video signal; Connect the »; HDMI; « socket on the television and the corre-
ENGLISH 23 USING EXTERNAL DEVICES _______________ DVD player, DVD recorder, video recorder or set-top box Note: Which television socket(s) you connect your external devices todepends on the sockets the external device is equipped withand the signals which are available.Note that with many external d...
Page 24 - Y Pb Pr; Using the Euro/AV socket
24 With a digital audio/video signal Video signal: digital video; resolution: standard 576p; HDTV 720p,1080i.Audio signal: stereo, analogue.Channel position »DVI«. 1 Connect the » DVI-D « socket on the television and the corre- sponding DVI socket on the external device using a standardDVI cable (di...
Page 25 - Switching VCR mode on and off; AV
ENGLISH 25 With S-Video signal Video signal: Y/C.Audio signal: stereo, analogue.Channel position »SVHS«. 1 Connect the » S-VHS « socket on the television and the corre- sponding socket on the external device using an S-Video cable(video signal). 2 Connect the » AV-3 L R « sockets on the television t...
Page 26 - Selecting the signal for the AV output
26 USING EXTERNAL DEVICES _______________ Selecting the signal for the AV output With this setting you can select which signal is output at the Euro-AVsocket AV1 or at the AV OUT V L R cinch sockets.The television station or the video/audio signal from connecteddevices.This enables you to transmit r...
Page 27 - Decoder or satellite receiver; Connecting a decoder or satellite receiver
ENGLISH 27 USING EXTERNAL DEVICES _______________ Decoder or satellite receiver In order for the television to receive encoded programs from a privately operated station, a decoder is needed. Connecting a decoder or satellite receiver 1 Connect the » AV-1 « socket on the television set and the appro...
Page 28 - Camcorder; Connecting the camcorder
28 USING EXTERNAL DEVICES _______________ Camcorder Connecting the camcorder 1 Connect the yellow socket » AV-3 Video « on the television and the corresponding socket on the camcorder (VHS, Video 8)with a cinch cable (picture signal); or connect the » S-VHS « socket (picture signal) on the televisio...
Page 29 - Settings for the PC; PC MONITOR MODE
ENGLISH 29 Connecting a PC 1 Connect the socket » PC-IN « or » DVI-D « on the television to the corresponding socket on the PC using a VGA cable. 2 Connect the socket » PC-DVI Audio In « on the television to the corresponding socket on the PC using a cinch cable (audiosignal). Note: Adjust your PC t...
Page 30 - Setting television channels; Setting channels using the search; SPECIAL SETTINGS
30 Setting television channels This setting is only necessary if a new channel comes on air and youdo not want to change the order of your channels. The televisionchannel can be set directly or using the search. Setting channels using the search 1 Press » i « to open the »MAIN MENU«. – The »MAIN MEN...
Page 32 - Re-tuning all television channels
32 Re-tuning all television channels You can re-tune all the television stations, for example if you moveto another town. 1 Press » i « to open the »MAIN MENU«. 2 Select »Setup« with » P+ « or » P- « and confirm with » OK «. – The »Setup« menu appears. 3 Select »ATS« with » P+ « or » P- « and confir...
Page 33 - Technical data; INFORMATION; Subject to alteration and correction!
ENGLISH 33 Technical data Operating voltage: 100 - 240 V, 50/60 HzPower consumption: in operation 175 W in standby approx. 2 W (Elegance 37)in operation 240 Win standby approx. 2 W (Elegance 40) Sound output: 2 x 20 watts music (2 x 10 sine wave) Reception range: C01 … C80, special channels S01 … S4...
Page 34 - Fault; Troubleshooting
34 INFORMATION _____________________________________ Fault Screen lit (snow), but nostation Poor picture contrast Interference to pictureand/or soundGhosts, reflection No colour Picture but no sound Teletext missing or faulty Remote control does notwork Picture is dark in PC mode Possible cause Ante...
Page 35 - Additional Information for units sold in the UK.
ENGLISH 35 Additional Information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mainssupply.The range of multi-system receivers is built to work in most European coun-tries. However, the mains plug and socket system for the UK differs frommany Europea...
