Grundig E10 - Manual

Table of Contents:

• Page 3 – Thank you for purchasing the E10; North American Pacific Time.
• Page 4 – TABLE OF CONTENTS
• Page 5 – MAJOR FEATURES OF THE ETÓN E10
• Page 6 – DIAGRAMS
• Page 7 – DIAGRAMS continued; RADIO OFF DISPLAY; Refers only to the display’s upper right corner.
• Page 8 – GETTING STARTED; WHAT THE E10 INCLUDES; In the instructions below, numbers in paren-; INSTALLING BATTERIES; : If you don’t plan to use rechargeable batter-; PREVENTING BATTERY ACID LEAKAGE; To power the E10 with the included AC Adaptor/; CHARGING BATTERIES IN THE E10; are manufactured with specific capacities rated in mil
• Page 9 – TURNING THE E10 ON AND OFF; turned off, until the batteries drain or indefinitely; Once charging is finished, ‘CHARGE’ will stop flash; VOLUME AND TONE CONTROLS
• Page 10 – BASIC RADIO OPERATION continued; SELECTING FM, AM or SHORTWAVE; a specific shortwave meter band. The frequency; LISTENING IN FM STEREO; Enter the frequency using the numeric keypad
• Page 11 – TUNING KNOB; The TUNING knob control (28) is located on the right; LOCKING THE TUNING KNOB; that the key-lock symbol flashed twice in the lower; CANCELLING TUNE-MUTE; be difficult for some to actually hear the difference.
• Page 12 – CLOCK AND TIMER FEATURES; SETTING THE CLOCK
• Page 13 – CLOCK AND TIMER FEATURES continued; TIMER SET METHOD 2 – NUMERIC KEYPAD:
• Page 14 – WORKING WITH MEMORY; that the memory number digits, labeled; ACCESSING WHAT IS STORED INTO MEMORY; erately stopped. Unused memories are not accessed.
• Page 15 – WORKING WITH MEMORY continued; button for about a second. Then release it. Note; DELETING ALL MEMORY PAGE CONTENTS; seconds and then release it. ‘Del’ and PAGE; MOVING A STORED FREQUENCY; Within 5 seconds use the numeric keypad to; CUSTOMIZING MEMORY PAGES; The E10 is configured at the factory with 10; HOW TO USE THE ATS FEATURE; stations first and then AM stations, from the lowest
• Page 16 – SYSTEM SET CODES; CODE NUMBER; SYSTEM SET CODE TABLE; Set the clock system to 12 Hr format
• Page 17 – SYSTEM SET CODES continued; CHANGING SYSTEM SET CODES; The code ICON (52) will briefly appear in the lower; CHANGING THE CLOCK FROM 24 TO 12 HOUR; SYSTEM SET button. ‘12H’ briefly appears in the; DEFAULT FACTORY SYSTEM SET CODES; quickly flashes in the display in the following order.
• Page 18 – USING THE LIGHT; seconds) will cause it to stay on indefinitely; USING THE ANTENNA GAIN SWITCH; appears in the lower right corner of the dis-
• Page 19 – 1 LISTENING TO SHORTWAVE STATIONS; WHAT ARE SHORTWAVE STATIONS?
• Page 20 – 1 LISTENING TO SHORTWAVE STATIONS continued; BAND CHART OF SHORTWAVE AUTO-SCANING RANGES; FREQUENCY RANGE
• Page 21 – To help find specific stations and their broadcast; LEARNING MORE ABOUT SHORTWAVE; experienced shortwave listener, you may find this a; 2 UNDERSTANDING SHORTWAVE BANDS continued
• Page 22 – is a specific frequency. The 19 meter band could be
• Page 23 – DAY BANDS AND NIGHT BANDS; 2 UNDERSTANDING SHORTWAAVE BANDS continued; EVENING/NIGHT LISTENING; CHARACTERISTICS
• Page 25 – 3 TROUBLESHOOTING continued; Register by visiting our website at; Product Registration
• Page 26 – period specified above. The product must be; 5 LIMITED WARRANTY TO THE ORIGINAL CUSTOMER; lightning, or other acts of nature incorrect line
• Page 27 – Service your Etón or Grundig product; – If your product is still in warranty; 6 SERVICE INFORMATION; – If your product is no longer