Goodman GCH9 - Manual
Goodman GCH9 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PRODUCT IDENTIFICATION; D: Dedicated Downflow
- Page 3 – These models are Low NOx.
- Page 4 – PRODUCT DESIGN; Left; High Altitude Derate; Pressure
- Page 5 – COMPONENT IDENTIFICATION
- Page 6 – Cabinet Size; All dimensions are in inches.
- Page 7 – Part Number
- Page 9 – A large array of Amana; Coil Matches (Goodman; PRODUCT
- Page 10 – Filters can also be installed elsewhere in; Upflow Filters; Disposable Minimum Filter Area (in; Based on a 300 ft/min filter face velocity]; Permanent Minimum Filter Area (in; *Minimum filter area dictated by heating airflow requirement.; Bottom Return
- Page 12 – FURNACE SPECIFICATIONS
- Page 13 – BLOWER PERFORMANCE SPECIFICATIONS; BLOWER PERFORMANCE
- Page 14 – MP
- Page 15 – WIRING DIAGRAMS
C
US
®
RT6612019 Rev. 2
April 2010
GCH9
40" 95% Gas Furnace
•
Refer to Service Manual
RS6610004 for installation, operation, and troubleshooting information.
•
All safety information must be followed as provided in the Service Manual.
•
Refer to the appropriate Parts Catalog for part number information.
•
Model numbers listed on page 3.
Copyrig
ht © 2007, 2009-2010 Goodman Manuf
acturing Company, L.P.
TECHNICAL MANU
TECHNICAL MANU
TECHNICAL MANU
TECHNICAL MANU
TECHNICAL MANUAL
AL
AL
AL
AL
This manual is to be used by qualified, professionally trained HVAC technicians only.
Goodman does not assume any responsibility for property damage or personal
injury due to improper service procedures or services performed by an unqualified
person.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PRODUCT IDENTIFICATION 2 Minior Revision B 3 Description Air Flow Direction KBTUH AFUE Major Revision Maximum CFM @ 0.5" ESP 3: 1200 4: 1600 5: 2000 Cabinet Width The model and manufacturing number are used for positive identification of component parts used in manufacturing.Please use these num...
PRODUCT IDENTIFICATION 3 G CH90453BXA* GCH90703BXA* GCH90704CXA* GCH90904CXA* GCH90905DXA* GCH91155DXA* The model and manufacturing number are used for positive identification of component parts used in manufacturing.Please use these numbers when requesting service or parts information. These models...
4 PRODUCT DESIGN 3. Conversion kits for high altitude natural or propane gas operation are available. See High Altitude Derate chartfor details. 4. Installer must supply the following gas line fittings, de- pending on which entrance is used: Left -- Two 90º Elbows, one close nipple, straight pipe. R...
