Page 2 - Safety Precautions; CAUTION
2 Safety Precautions This lightning flash with arrowhead symbol within anequilateral triangle is intended to alert the user tothe presence of uninsulated dangerous voltagewithin the product’s enclosure that may be of sufficient magnitude to constitute a risk of electricshock to persons. The exclamat...
Page 3 - INTRODUCTION; IMPORTANT SAFETY INSTRUCTIONS
INTRODUCTION 3 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. - All these safety and oper- ating instructions should be read before the product isoperated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future refer-ence. 3. Heed all warnin...
Page 4 - Table of Contents; Introduction; Checking the contents of DVD Video discs: Menus . 28; Reference; Indicates special operating features of this unit.
4 Table of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 ...
Page 5 - Before Use; Playable Discs; otes; Remote Control Battery Installation; Caution; Remote Control Operating Range
INTRODUCTION 5 Before Use Playable Discs DVD (8 cm/12 cm disc) Audio CD (8 cm/12 cm disc) In addition, this unit can play CD-Rs or CD-RWs thatcontain audio titles, MP3 or JPEG files. otes – Depending on the conditions of the recording equipment or the CD-R/RW disc itself, some CD-R/RW discs cannot b...
Page 6 - ” may appear on the TV screen during operation.; Yes; Selecting the Viewing Source
6 Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materialscome in handy. For maximum protection, re-pack theunit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or ...
Page 7 - Front Panel Controls
7 INTRODUCTION Front Panel Controls Remote Sensor Point the remote control here. Front Panel Display Shows the current status of the DVD+VCR. Disc Tray (DVD deck) Insert a disc here. Video Cassette Compartment(VCR deck) Insert a video cassette here. DVD EJECT ( Z Z ) Opens or closes the disc tray to...
Page 8 - Front Panel Display; DVD
8 Front Panel Display DVD VCRREC PM COPY TV Lights when the DVD+VCR is in TimerRecording mode or when a Timer Recordingis programmed. Lights when a cassette is loaded inthe VCR deck. Lights when the VCR deck isselected. Lights when the DVD+VCR is recording a tape. Lights when the current time is PM ...
Page 9 - Remote Control
9 INTRODUCTION Remote Control DVD & VCR select buttons Sets the remote control to operate either the DVD deck or the VCR deck. POWER Turns the DVD+VCR ON and OFF. TV/VCR Switches between your TV tuner and the DVD+VCR tuner. DISPLAY Accesses the on-screen display. Switches among the clock, tape c...
Page 10 - Connections Panel; VCR IN LINE 1; Connects to the audio/video output of an; ANTENNA INPUT; Connects to a TV with video and audio inputs.; AC Power Cord; Plugs into a power source.
10 Connections Panel VCR IN LINE 1 DVD/ VCR OUT DVD EXCLUSIVE OUT AUDIO OUT COAXIAL Do not touch the inner pins on the rear panel jacks.Electrostatic discharge may cause permanent dam-age to the unit. VCR IN LINE 1 (VIDEO IN/AUDIO IN) Connects to the audio/video output of an external source (audio s...
Page 11 - Connections
PREP ARA TION 11 Connections ips For instructions on the various ways to connect theDVD+VCR to your TV and other equipment, please refer topages 11-13. Please refer to the manuals of your TV, VCR, stereo systemor other devices as necessary to make the best connec-tions. For better sound reproduction...
Page 12 - Basic TV Connections; RF coaxial connection; ) on the front panel for about five seconds.; Audio/Video connection; using the supplied audio
12 Connections (Continued) Basic TV Connections Make one of the following connections, depending onthe capabilities of your existing equipment. RF coaxial connection Connect the RF.OUT jack on the DVD+VCR to theantenna in jack on your TV using the supplied 75-ohmcoaxial cable (R) . ote If you use th...
Page 13 - ote; Digital Multi-channel Sound; Accessory Device Jack Panel
PREP ARA TION 13 Connections (Continued) Optional, Preferred TV Connections ote You can ONLY listen to DVD playback using the COAX-IAL (X) , AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.) Connecting to an Amplif...
Page 14 - EASY INFORMATION; On-Screen Menus Setup; Menu Selection; VCR Operation Setup
14 On-Screen Display (OSD) The OSD provides feedback during VCR operation. ❶ ❷ ❸ ❺ ❹ ❶ TAPE SPEED DISPLAY Shows the current tape speed. ❷ FUNCTION DISPLAY Indicates the function in progress. ❸ CHANNEL DISPLAY Indicates the selected channel (or AV). ❹ DATE DISPLAY Shows the current date (month/date/d...
Page 15 - VCR Setup Menu Options; Channel Selection; AUTO CHANNEL PROGRAMMING; TO ADD OR ERASE CHANNELS FROM MEMORY
15 PREP ARA TION VCR Operation Setup (Continued) VCR Setup Menu Options 11 Press MENU to display the MAIN menu. 2 2 Use v v / V V to select the SETUP menu, then press ENTER. The SETUP menu will appear. 3 3 Use v v / V V to choose the desired option on the SETUP menu, then use b b / B B to choose the...
Page 16 - Setting the Clock; Auto Clock Set; Things to know before starting
16 VCR Operation Setup (Continued) Setting the Clock The DVD+VCR gives you two ways to set the time anddate: 1) Auto Clock Set, or 2) Manual Clock Set. TheAuto Clock Set feature enables the DVD+VCR to set theclock while the DVD+VCR is turned off. Auto Clock Set The Auto Clock Set feature is set to O...
Page 17 - DVD Operation Setup; On-screen display operation; Press DISPLAY during playback.; Temporary Feedback Field Icons; Options; Selection Method
PREP ARA TION 17 DVD Operation Setup General Explanation This manual provides general instructions for operatingthe DVD+VCR. Some DVDs have special requirementsor allow only limited operations during playback. Whenthis occurs, the symbol appears on the TV screen, indicating that the operation is not...
Page 18 - Initial Settings; General Operation; The setup menu appears.; Language; Disc Language; Menu Language; Picture; TV Aspect
18 DVD Operation Setup (Continued) Initial Settings You can set your personal preferences for DVD+VCRoperation. General Operation 11 Press SETUP. The setup menu appears. 2 2 Use v v / V V to select the desired option. The screen will show the current setting for theselected option, as well as altern...
Page 19 - Digital Audio Output; Others; Vocal; Note
PREP ARA TION 19 DVD Operation Setup (Continued) Sound Digital Audio Output Each DVD disc has a variety of audio output options.Set the DVD+VCR’s Digital Audio Output according tothe type of audio system you use. DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you have connected the DVD+VCR’s DIGITAL...
Page 20 - Parental Control; Rating; If you select Unlock, Parental Control is; Country Code; Enter the old password, then press ENTER.; If you forget your 4-digit password; Press SETUP to display the Setup menu.
20 DVD Operation Setup (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable forchildren. Therefore, discs may contain Parental Controlinformation that applies to the complete disc or to certain scenes on the disc. These scenes are ratedfrom 1 to 8, and alternatively, mo...
Page 21 - VCR Operation; Insert a prerecorded video cassette.; Tracking Control; Auto Tracking; Special Effects Playback; Special effects playback notes; Search
OPERA TION 21 VCR Operation Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) orset the TV’s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between theDVD+VCR and the TV, set the TV’s source selector to VIDEO. Set the DVD+VCR sou...
Page 22 - Normal Recording; To pause recording; ) to pause the tape during; Timer Recording; The PROGRAM menu will appear.
Normal Recording Preparation: Turn on the power on both the DVD+VCR and TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) orset the TV’s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between theDVD+VCR and the TV, set the TV’s source selector toVIDEO. 11 Insert a video...
Page 24 - Instant Timer Recording; The channel number appears on the TV screen.; Checking the Recording Time; Copying from DVD to VCR; Insert a blank VHS video tape into the VCR deck.
24 VCR Operation (Continued) Instant Timer Recording Instant Timer Recording allows you to easily make arecording of a preset length without using the program-mable timer. Preparation: Turn on the power on both the DVD+VCR and the TV. Be sure the TV is tuned to the DVD+VCR output channel (3 or 4). I...
Page 25 - Tape Counter Memory Feature; changes the TV screen as; Counter Memory Feature; Begin recording or playing a tape.; Tape Remaining; repeatedly until the REM indicator; Additional Information; Auto Play System
OPERA TION 25 VCR Operation (Continued) Tape Counter Memory Feature Real-Time Counter The tape counter shows length of tape in hours, min-utes, and seconds. Press CLK/CTR to select the real- time counter display.Every press of CLK/CTR changes the TV screen as shown below. The counter changes to “0:0...
Page 26 - Playback Setup; Screen Saver; General Features; Moving to another TITLE
26 DVD Operation Playing DVDs Playback Setup Turn on the TV and select the video input source con-nected to the DVD+VCR. Audio system: Turn on the audio system and selectthe input source connected to the DVD+VCR. Set the DVD+VCR output source to DVD as shown in“Selecting the Viewing Source” on page ...
Page 27 - ips
OPERA TION 27 DVD Operation (Continued) General Features (Continued) Still Picture and Frame-by-Frame Playback 1 Press PAUSE/STEP ( X ) during playback. The DVD+VCR will go into Pause mode. 2 With a DVD, you can advance the picture frame byframe by pressing PAUSE/STEP ( X ) repeatedly on the remote ...
Page 28 - Special DVD Features
28 DVD Operation (Continued) General Features (Continued) Marker Search You can start playback from a bookmarked point onyour disc. Up to nine points can be memorized.To enter a mark, follow these steps. 1 During disc playback, press MARK when playbackreaches the point you want to bookmark. The Mark...
Page 29 - Operation with Audio CD and MP3 Disc; Notes on MP3 Recordings; About MP3
OPERA TION 29 Operation with Audio CD and MP3 Disc Playing an Audio CD and MP3 Disc The DVD Player can play MP3 formatted recordings onCD-ROM, CD-R or CD-RW discs.Before playing MP3 recordings, read the notes on MP3Recordings on right. 11 Insert a disc and close the tray.Audio CD; Audio CD menu appe...
Page 30 - Operation with Audio CD and MP3 Disc (Continued)
30 Operation with Audio CD and MP3 Disc (Continued) Pause 1 Press PAUSE/STEP ( \[ ) during playback. 2 To return to playback, press PLAY N or press PAUSE/STEP ( \[ ) again. Moving to another Track Press REW ( . ) or FF( > ) briefly during playback to go to the next track or to return to thebeginn...
Page 31 - Viewing a JPEG disc; Moving to another File; Operation with JPEG Disc
OPERA TION 31 Viewing a JPEG disc This DVD Player can play discs with JPEG files andKodak picture CD. Before playing JPEG recordings,read the notes on JPEG Recordings on right. 11 Insert a disc and close the tray. The MP3/JPEG choice menu appears on the TVscreen. 2 2 Use 3 3 / 4 4 to select the JPEG...
Page 32 - Programmed Playback; Erasing a Track/File from the Program List
32 Programmed Playback MP3 CD Programmed Playback with Audio CDand MP3 Disc The Program function enables you to store your favoritetracks from any disc in the player memory. Program can contain 30 tracks. 11 Press PROG.PLAY during playback or in thestop mode to enter the Program Edit mode. The mark ...
Page 33 - REFERENCE; Troubleshooting; Symptom
REFERENCE 33 Troubleshooting Symptom No power. The power is on, butthe DVD+VCR does notwork. No picture. No sound. The playback picture ispoor. The DVD+VCR doesnot start playback. The remote controldoes not work properly. Cause The power cord is disconnected. No disc is inserted. No tape is inserted...
Page 35 - Language Code List
REFERENCE 35 Language Code List Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali; Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byeloru...
Page 36 - Country Code List
36 Country Code List Code Country AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS American Samoa AT Austria AU Australia AW Aruba AZ Azerbaidjan BA Bosnia-Herzegovina BB Barbado...
Page 37 - Specifications; General; Outputs; VCR Specifications
37 REFERENCE Specifications General Power requirements AC 120V, 60 Hz Power consumption 23W Dimensions (approx.) 430 X 97.5 X 293 mm (16.9 x 3.9 x 11.5 inches) (w x h x d) Weight (approx.) 4.8 kg (10.58 lbs) Operating temperature 5˚C to 40˚C (41˚F to 104˚F) Operating humidity 5% to 90% Signal system...
Page 38 - LIMITED WARRANTY; GOVIDEO DVD+VCR LIMITED WARRANTY; year parts; Printed in Korea
LIMITED WARRANTY Who Provides the Limited Warranty During the warranty period, the GoVideo Warranty Administrator will honor DVD+VCRservice for 90 days labor, 1 year parts from the original date of consumer purchase. Seebelow for Commercial, Industrial or Educational use coverage. The DVD+VCR remote...
