Go Video DP 5050 - Manual

5 Player Overview 1 LCD Screen 2 Built-in Speakers 3 OPEN - Releases the disc tray cover. 4 CLOSE - Closes the disc tray cover. 5 PLAY  - Starts playback. 6 STOP  - Stops playback. 7 PAUSE  - Pauses playback. 8 OPEN - Releases the player’s top panel. 9 Power Indicator - Lights when player is on. ...

6 Player Overview 1 Video Output - Connects to a TV or display device. 2 Audio Output - Connects to a stereo TV or analog amplifier. 3 Coaxial Digital Audio Output - Connects to a digital amplifier/receiver with a Dolby Digital or DTS decoder. 4 Phones 1-2 Jacks - Connect to headphones or earphones. 5...

7 Inserting Remote Control Batteries 1 Squeeze the release lever and pull the battery tray out of the remote control. 2 Insert the supplied CR2025 3V lithium battery with the positive (+) side of the battery facing up. 3 Slide the battery tray back into place. Player Overview 1 2 3 45 6 7 8 18 17 16...

8 Step 1 - Connect AC Adapter Connect the supplied AC adapter to the DC IN jack on the right side of the portable DVD player. • You can also use the supplied cigarette lighter adapter in place of the AC adapter to supply power to the player. Quick Start Step 2 - Connect Headphones (Optional) You can...

9 Charging the Battery Pack While it is Attached to the Player 1 Connect the battery pack to the back of the player as shown. 2 Plug the supplied AC adapter into a standard power outlet, and then connect it to the DC In jack on the right side of the player. 3 Turn off the player. The battery pack wi...

10 Connections COAXIAL PHONES VOLUME VIDEO AUDIO AUDIO IN VIDEO IN Basic TV Connections You can connect the portable DVD player to a standard television using the player’s Audio and Video jacks. 1 Connect the supplied audio cable (mini-plug to RCA stereo) from the Audio jack on the left side of the ...

11 Enhanced Audio Connections For enhanced audio quality, you can connect the portable DVD player to a stereo system or digital amplifier/receiver. Analog Audio Connections 1 Connect the supplied audio cable (mini-plug to RCA stereo) from the AV Out jack on the left side of the player to the left and...

12 Before You Begin... Connect the portable DVD player to a power outlet and plug in headphones or listen to the built-in speakers. You can also connect the player to external equipment, such as a TV and/or audio system. If you do this, remember to: • Turn on your TV and select the appropriate video...

13 Forward/Reverse Scan Press  or  during playback. • Normal playback is resumed when you press PLAY/SEL.  . • The Forward Scan (  x2,  x4, etc.) and Reverse Scan (  x2,  x4, and etc.) speed changes each time you press the  /  buttons. Skip Next/Previous You can skip to a specific chapter or...

14 Displaying Scene Information Press INFO. during playback. • Press INFO. repeatedly to display the title number, chapter number, and other information on the screen. Stop Displaying Scene Information • Press INFO. repeatedly until the scene information disappears. Audio You can change the audio so...

15 Angle Some DVD discs contain scenes which have been shot simultaneously from a number of different angles. Use the ANGLE button to view these alternative scenes. 1 Press ANGLE during playback. 2 Press ANGLE repeatedly until the preferred viewing angle is selected. • ANGLE will only function on di...

16 Playing Audio CDs Before You Begin... Connect the portable DVD player to a power outlet and plug in headphones or listen to the built-in speakers. You can also connect the player to external equipment, such as a TV and/or audio system. If you do this, remember to: • Turn on your TV and select the...

17 Playing Kodak Picture CDs You can play Kodak Picture CDs in your portable DVD player. Basic Playback 1 Load a Kodak Picture CD. • After a few seconds, the portable DVD player starts a slide show of available images. 2 Press INFO. to view the current image number and total number of images. 3 Use ...

18 Playing JPEG Picture CDs You can play JPEG picture CDs in your portable DVD player. Basic Playback 1 Load a JPEG Picture CD. • After a few seconds, the portable DVD player starts a slide show of available images. 2 Press INFO. to view the current image number and total number of images. 3 Use the...

19 Other Disc Playback Playing MP3 CDs 1 Press POWER on. 2 Press OPEN to open the disc cover. 3 Hold the edge of the MP3 disc and place it in the tray with the label side up. • Press the disk onto the spindle in the center of the tray. 4 Close the disc cover. • After a few moments, the first MP3 file ...

20 On Screen Display (OSD) Language You can select among various languages for the player’s on-screen display (OSD). 1 Press SETUP in Stop mode. 2 Press  /  to select “Language Setup”, then press PLAY/SEL.  . 3 Press  /  to select “OSD”, then press PLAY/SEL.  . 4 Press  /  to select your pre...

22 TV Type The TV Type feature allows you to set your preferred aspect ratio for DVD movies. Choose from the following: • 4:3 PS (Pan & Scan) - Crops widescreen movies to fit a standard television. • 4:3 LB (Letterbox) - Shows the full width of widescreen movies on a standard television with blac...

23 TV System When connecting the portable DVD player to a TV, you must specify the broadcast system of your television. Choose from the following: • NTSC - The color TV broadcast standard for the USA, Canada, Latin America and Taiwan. • PAL - The color television broadcast standard for Western Europ...

24 Audio Setup : Move : Select SETUP: Quit Digital Out SPDIF/PCMSPDIF/RAWOff Digital Audio Output [DVD] The digital audio output jack (labeled “Coaxial”) is used to output the audio signal recorded on DVD discs to an external amplifier/receiver. The player provides three options for this audio signal...

25 Change Password [DVD] To change the Parental Control password: 1 Press SETUP in Stop mode. 2 Press  /  to select “Custom Setup”, then press PLAY/SEL.  . 3 Press  /  to select “Password”, then press PLAY/SEL.  . 4 Enter your old password, then press PLAY/SEL.  . • The factory pre-set passwo...

26 Restore Defaults Select “Default” to restore the portable DVD player to its factory default settings. 1 Press SETUP in Stop mode. 2 Press  /  to select “Custom Setup”, then press PLAY/SEL.  . 3 Press  /  to select “Default”, then press PLAY/SEL.  . • “READ” will be highlighted. 4 Press PLAY...

27 Brightness 1 Press LCD repeatedly to select Bright. 2 Use the  /  buttons to decrease or increase screen brightness from -3 to +3. Close 1 Press LCD repeatedly to select Close . 2 Use the  /  buttons to turn select On or Off. • Use this feature to turn off the LCD screen to preserve battery l...

28 Troubleshooting SYMPTOM REMEDY No power. • Insert AC adapter plug securely into power outlet. • Check if POWER button on right side of player is set to ON. • Check power at AC outlet by testing another appliance. Player does not start playback when PLAY/SEL.  is pressed. • Condensation has forme...

29 Handling Precautions • Hold the disc by the edges so the surface will not be soiled with fingerprints. • Fingerprints, dirt and scratches can cause skipping and distortion. • Do not write on the label side with a ball-point pen or other writing utensil. • Do not use record cleaning sprays, benzine...

30 Parts & Accessories ITEM DESCRIPTION PART NUMBER Rechargeable NiMH Battery Pack NiMH 3800mAh (~2.7 hour DVD playback time) 92-161-07020 Rechargeable Li-ion Battery Pack (optional) Li-ion 4000mAh (~3 hour DVD playback time) 92-161-07010 Rechargeable Li-ion Battery Pack (optional) Li-ion 6600mA...

31 Limited Warranty Who Provides the Limited Warranty During the warranty period, the GoVideo Warranty Administrator will honor service for 90 days labor, 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. Remote controls are w...