Gigabyte Technology 6BA - Manual
Gigabyte Technology 6BA – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – CPU SPEED SETUP; The CPU speed must match with the frequency RATIO. It will cause; DIP SWITCH
- Page 5 – Set system speed to 66MHz; Set system speed to Auto; system; Set system speed to 100MHz; system; There are two ways to set system speed
- Page 11 – TB : Turbo Switch Connector
- Page 12 – GD : Green Function LED; Pin
- Page 17 – IDE2: Secondary IDE port
- Page 19 – Disable Keyboard Power On
- Page 24 – Close :For Voodoo3 VGA card
- Page 26 – Intel Pentium; FPU Winmark
R-30-01-090526
6BA
USER'S MANUAL
1. System power on by PS/2 Mouse: First, enable this function
in CMOS Setup, then you can power on the system by
double clicking the right or left button of your PS/2 Mouse.
2. System power on by Keyboard: If your ATX power supply
supports larger than 300 mA 5V Stand-By current, you can
power on your system by entering password from the
Keyboard after setting the “Keyboard power on” jumper
(JP1) and password in CMOS Setup.
3. Support Modem Ring-On. (Include internal Modem and
external modem on COM A and COM B)
4. Wake-up on LAN supports(on J11): Your ATX power supply
must support larger than 720 mA 5V Stand-By current.
5. Support 3 steps ACPI LED.
6. Support LDCM
For Intel Pentium
II / III / Celeron
Processor MAINBOARD
REV. 3.0 First Edition
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Quick Installation Guide 2 I. Quick Installation Guide : CPU SPEED SETUP The system bus speed can be selectable between 66.6MHz and 100MHz.The user can select the system bus speed (JP8) and change the DIPSWITCH selection to set up the CPU speed for 233 - 633MHz processor. M The CPU speed must match ...
6BA 3 M JP8 (Select the system speed between 66.6MHz and 100MHz) 1-2 Close Set system speed to 66MHz − system always run at 66MHz FSB (Front Side Bus). 2-3 Close Set system speed to Auto − system speed detect automatically (66/ 100MHz FSB). 1-2-3 Open Set system speed to 100MHz − system always run a...
6BA 9 TB : Turbo Switch Connector 82443LX 6BA PIIX4 82443BX 83977-EF BIOS Function Reserved RST : Reset Switch 82443LX 6BA PIIX4 82443BX 83977-EF BIOS 1 Open :Normal operation 1 Close :Reset system
