Page 2 - Important
Operator's Manual Fourth Edition • First Printing Z-34/22 IC Part No. 1000048 Important Read, understand and obey these safety rules andoperating instructions before operating this machine.Only trained and authorized personnel shall bepermitted to operate this machine. This manualshould be considere...
Page 3 - Safety Rules; Danger
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 1 Safety Rules Danger Failure to obey the instructions andsafety rules in this manual willresult in death or serious injury. Do Not Operate Unless: You learn and practice the principles of safe machine operation contained ...
Page 4 - Electrocution Hazards
Operator's Manual Fourth Edition • First Printing 2 Z-34/22 IC Part No. 1000048 SAFETY RULES Electrocution Hazards This machine is not electrically insulated and willnot provide protection from contact with orproximity to electrical current. Maintain safe distances from electrical power linesand app...
Page 6 - Fall Hazards
Operator's Manual Fourth Edition • First Printing 4 Z-34/22 IC Part No. 1000048 SAFETY RULES Do not push the machine or other objects with theboom. Do not contact adjacent structures with the boom. Do not tie the boom or platform to adjacentstructures. Do not place loads outside the platform perimet...
Page 7 - Collision Hazards
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 5 Collision Hazards Be aware of limited sightdistance and blind spotswhen driving or operating. Be aware of the boom position when rotating theturntable. Check the work area for overhead obstructions orother possible hazar...
Page 9 - Decal Legend
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 7 SAFETY RULES Decal Legend Genie product decals use symbols, color codingand signal words to identify the following: Safety alert symbol—used to alertpersonnel to potential personalinjury hazards. Obey all safetymessages ...
Page 10 - Controls
Operator's Manual Fourth Edition • First Printing 8 Z-34/22 IC Part No. 1000048 Controls Platform Control Panel 1 Drive enable switch 2 Drive enable indicator light 3 Auxiliary power switch 4 Platform level switch 5 Horn button 6 Primary boom extend/retract switch 7 Red Emergency Stop button 8 Not u...
Page 12 - Legend
Operator's Manual Fourth Edition • First Printing 10 Z-34/22 IC Part No. 1000048 Legend 1 Non-steer tire 2 Steer tire 3 Ground controls 4 Secondary boom 5 Primary boom 6 Jib boom 7 Platform controls 8 Platform 9 Lanyard anchorage point 10 Sliding mid-rail 11 Manual storage container 12 Foot switch
Page 13 - Pre-operation Inspection; Do Not Operate Unless:; Fundamentals
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 11 Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator'smanual. 1 Avoid hazardous situations. 2 Always perform a pre-operation inspecti...
Page 15 - Maintenance; Check the Hydraulic Oil Level; Check the Engine Coolant Level
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 13 Maintenance Observe and Obey: Only routine maintenance items specified in this manual shall be performed by the operator. Scheduled maintenance inspections shall be completed by qualified service technicians,according t...
Page 16 - Check the Engine Oil Level; Check the Batteries
Operator's Manual Fourth Edition • First Printing 14 Z-34/22 IC Part No. 1000048 MAINTENANCE Check the Engine Oil Level Maintaining the proper engine oil level is essentialto good engine performance and service life.Operating the machine with an improper oil levelcan damage engine components. Check ...
Page 17 - Scheduled Maintenance
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 15 Scheduled Maintenance Maintenance performed quarterly, annually andevery two years must be completed by a persontrained and qualified to perform maintenance on thismachine according to the procedures found in theservice...
Page 18 - Function Tests
Operator's Manual Fourth Edition • First Printing 16 Z-34/22 IC Part No. 1000048 Function Tests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator'smanual. 1 Avoid hazardous situations. 2 Always perform a pre-operation inspection. 3 Alwa...
Page 19 - At the Ground Controls
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 17 FUNCTION TESTS 1 Select a test area that is firm, level and free of obstruction. At the Ground Controls 2 Turn the key switch to ground control. 3 Pull out the red Emergency Stop button to the on position. Result: The b...
Page 20 - At the Platform Controls
Operator's Manual Fourth Edition • First Printing 18 Z-34/22 IC Part No. 1000048 FUNCTION TESTS At the Platform Controls Test the Emergency Stop 15 Turn the key switch to platform control and restart the engine. 16 Push in the platform red Emergency Stop button to the off position. Result: The engin...
Page 23 - Workplace Inspection
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 21 Workplace Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator'smanual. 1 Avoid hazardous situations. 2 Always perform a pre-operation inspection. ...
Page 24 - Operating Instructions
Operator's Manual Fourth Edition • First Printing 22 Z-34/22 IC Part No. 1000048 Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator'smanual. 1 Avoid hazardous situations. 2 Always perform a pre-operation inspection...
Page 26 - Operation from Platform
Operator's Manual Fourth Edition • First Printing 24 Z-34/22 IC Part No. 1000048 Operation from Platform 1 Turn the key switch to platform control. 2 Pull out both ground and platform red Emergency Stop buttons to the on position. 3 Gasoline/LPG models: Choose fuel by moving the fuel select switch t...
Page 30 - Decals; Inspection for Decals with Words
Operator's Manual Fourth Edition • First Printing 28 Z-34/22 IC Part No. 1000048 Decals Part No. Decal Description Quantity 27564 Danger - Electrocution Hazard 2 28158 Label - Unleaded 1 28159 Label - Diesel 1 28160 Label - LPG 1 28161 Danger - Crushing Hazard 3 28164 Notice - Hazardous Materials 1 ...
Page 34 - Transport and Lifting Instructions
Operator's Manual Fourth Edition • First Printing 32 Z-34/22 IC Part No. 1000048 Transport and Lifting Instructions Observe and Obey: The transport vehicle must be parked on a level surface. The transport vehicle must be secured to prevent rolling while the machine is beingloaded. Be sure the vehicl...
Page 36 - Lifting Instructions
Operator's Manual Fourth Edition • First Printing 34 Z-34/22 IC Part No. 1000048 TRANSPORT AND LIFTING INSTRUCTIONS Observe and Obey: Only qualified riggers should rig and lift the machine. Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstandthe machine weight...
Page 37 - Specifications
Operator's Manual Fourth Edition • First Printing Part No. 1000048 Z-34/22 IC 35 Specifications Z-34/22 2WD Industrial Height, working maximum 40 ft 6 in 12.5 m Height, platform maximum 34 ft 6 in 10.5 m Height, stowed maximum 6 ft 7 in 2 m Horizontal reach maximum 22 ft 3 in 6.8 m Width 5 ft 8 in 1...
Page 40 - California Proposition 65; WARNING; The exhaust from this product contains chemicals
D is tr ib u te d B y: California Proposition 65 WARNING WARNING The exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Genie North America Phone 425.881.1800 Toll Free USA and Canada800.536.1800 Fax 425.883.3475 G...
