Page 2 - SAFETY PRECAUTIONS; NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED; TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD,
1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presenc...
Page 3 - Contents; Rear Panel Connectors; Connecting the Speed Dome directly into DVR; Quick button for multi screen Display.
2 Contents Disclaimer ............................................................................................... 5 Warning ................................................................................................... 5 Caution .................................................................
Page 4 - NAVIGATION THE MENU
3 1. LOG IN/OUT. ................................................................................................... 29 2. NAVIGATION THE MENU .............................................................................. 30 VI. SETUP ....................................................................
Page 5 - Custom Functions; Multi Channel Playback
4 7.3. PTZ EVENT ..................................................................................................................... 67 8. SYSTEM .......................................................................................................... 68 8.1. GENERAL ................................
Page 7 - Caution
6 dry cloth on a regular periodic basis and wipe away the dust and dirt that collects on the device. In dusty, humid or greasy environments, the dust that collects around the ventilation or the slots on the outer casing over long periods of time may become saturated with humidity and short-circuit, ...
Page 8 - Preventing Malfunction; FCC Compliance; Regulatory; CAUTION; accessible
7 Preventing Malfunction Avoid Strong Magnetic Fields. Never place the DVR in close Proximity to electric motors or other equipment generating strong electromagnetic fields. Exposures to strong magnetic fields may cause malfunctions or corrupt image data. Avoid Condensation Related Problems. Moving ...
Page 9 - Package Contents; CONTENTS
8 Package Contents Please check the package and contents for visible damage. If any components are damaged or missing, do not attempt to use the unit, contact the supplier immediately. If the unit must be returned, it must be shipped in the original packing box. CONTENTS QUANTITY REMARK DIGITAL VIDE...
Page 14 - Remote Controller
13 3. Remote Controller DVR ID: Set the proper DVR System ID through which to operate. Press the ID button, and then press the number button within two seconds to select the system ID of the DVR. If you set the System ID to Zero, you can control multiple DVRs at the same time.
Page 15 - Virtual Keypad for Mouse Control
14 4. Virtual Keypad for Mouse Control This DVR provides a virtual on-screen keyboard to perform the control by mouse. Connect a mouse via USB port before use. If you click right button of your mouse in Live mode and Playback mode, you will see following virtual controller. This Virtual Keyboards op...
Page 16 - Audio Input
15 II. INSTALLATION & CONNECTIONS 1. Camera, Monitor, Audio, Alarm sensor and Power cord Audio Audio Input Output impedance (0 dB) 10 k Ohm 300 ohm voltage range 1 Vpp 1.4 Vpp
Page 17 - GND
16 2. Alarm inputs and Alarm outs 2.1. Connection of N.O (Normally Open) The maximum of Alarm output is 1A 30VDC, 0.5A 125V AC. * Alarm Input( AI) 4ch : 1~4 8ch: 1~8 16ch : 1~16 * G GND
Page 20 - Connecting Single User with 2 DVR Configuration; Multiple Keyboards are connected by cascade connection.
19 3.3. Connecting Single User with 2 DVR Configuration Multiple PTZ cameras are connected by daisy-chaining the camera connection. Multiple Keyboards are connected by cascade connection.
Page 21 - PC system requirement for Network connection.; (Crossover cable for direct connect to PC); all PC’s due to the variety of PC’s internet connection settings.
20 4. PC system requirement for Network connection. (a) Pentium-4 2.0GHz or Higher (b) 512MB RAM (c) Windows 2000, ME, Windows XP, Window Vista, Window 7 (d) 16MB Video Card (e) 10/100/1000-BaseT Ethernet Port (f) CAT-5/6 UTP Cable for LAN (Crossover cable for direct connect to PC) <Disclaimer>...
Page 22 - III.QUICK START PAGE; ADMIN and the default password is “; admin; ” and password to run the EMS software is “
21 III.QUICK START PAGE ADMIN and the default password is “ 000000 ” The Default User ID “ admin ” and password to run the EMS software is “ 0 ”
Page 23 - the time and the date on the DVR.
22 Time & Date Setting When the DVR is powered on for the very first time, the time and date are set as default to January 1, 2009 Thursday 01:00:00. Before any other operation of the Digital Video Recorder, it is important to setup the time and the date. Please refer to page 63 for setting the ...
Page 24 - In terminal is triggered by an alarm sensor.; Motion
23 IV.LIVE VIEWING 1. Display Overview 1. Recording Mode Background color of Number will be different based on the recording status. 1) Red - Event (Motion/Alarm) Recording 2) Yellow - Continues Recording 3) Black - No Recording. 2. Event Indicator (1) Indicate Alarm In terminal is triggered by an a...
Page 26 - Multi-screen Display and Sequencing
25 2. Multi-screen Display and Sequencing 2.1. Screen Display. Select any camera for Full screen display by pressing the Number button of the desired camera. 2.2. Multi-screen Display and Switch Sequencing Display. 1) Press [DISPLAY] buttons to activate the multiscreen display. It is changed the ord...
Page 27 - Repositioning
26 3. Quick button for multi screen Display. 3.1. Quick multi split mode change - Press F1 button on the remote controller + <Number> For example, press F1 button then number 8. The eight channel view mode will be displayed. <Note> 6,4,8,10,13 split mode must be checked on <Spit mode&...
Page 31 - * It is automatically saved changes when you move between TAP menus.; Selected Not selected
30 2. NAVIGATION THE MENU 1. Log on the DVR at admin level or user with configure level. * User with configure feature is limited to access [DISK and System Menu]. 2. On the front panel or remote control, press [MENU]. Using the mouse, click wherever on monitor, Virtual remote control will be appear...
Page 33 - ) Device: Each Monitor may be configured in different way.; SPOT1; will be activated while it’s in Switch Mode.; Event; DWELL
32 1.2. SWITCH Setup (Monitor Configure) 1. The menus are displayed with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the Direction buttons [ ] . 2. Settings 1) Device: Each Monitor may be configured in different way. [MAIN SPO...
Page 34 - This function is limited to use on SPOT Monitor in this model.; EVENT
33 4) SPLIT MODE : Select desired sequence mode to switching. <note>This function is limited to use on SPOT Monitor in this model. 5) USE CHANNEL: Select the cameras to be inclcuded or excluded from the automatic switching. 3. Save changes and exit the menu, press [MENU] button. Exit the menu ...
Page 35 - ITEM; DEFAULT; ADJUSTMENT
34 2. CAMERA 1. Press Left/Right buttons [ ] or number button to select the desired camera 2. Camera Channel option is highlighted and the camera settings are displayed. The menus are displayed with options in the left-hand column and settings in the right hand column. 2.1. Video Adjustment To Confi...
Page 38 - By default, it’s set to OFF
37 2.4. Motion Detection Setting To Configure Motion Area : 1. Select Camera number button to configure the desired camera. 2. Select Category for “GRID ”. Settings are shown at default levels. 1) Motion Level : The sensitivity settings are : 1: Low sensitivity ~ Level 20: High sensitivity. By defau...
Page 41 - Signals or other contributing conditions.
40 Quality NTSC PAL UNIT 720*480 720*240 360*240 720*576 720*288 360*288 LOW 11.7 5.8 2.9 14.0 7.0 3.5 KB MIDDLE 15.0 7.5 3.8 18.0 9.0 4.5 KB HIGH 18.3 9.2 4.6 22.0 11.0 5.5 KB SUPER 21.7 10.8 5.4 26.0 13.0 6.5 KB ULTRA 25.0 12.5 6.3 30.0 15.0 7.5 KB * This is calculated theoretically and in actuali...
Page 50 - x o
49 at the same time. It automatically configures one HDD for Recording and the other for Mirroring. 5) Initialise for Back Up : Selected device, such as Media or External HDD, is formatted for backup use. Here’s the guide for backing up data to various devices. Once you press the start button, this ...
Page 52 - We recommend changing the HDD if its status is in
51 5.3. S.M.A.R.T STATUS Displays HDD information, such as Bad Sector, Temperature and HDD running time. S.M.A.R.T information has slight differences between depending on the HDD manufacturer. We recommend changing the HDD if its status is in <PRE-FAIL> *NOTE : Please refer to STATUS explanati...
Page 54 - Example
53 6.2. GENERAL 1. Access Port: Select “0001 ~ 9999” Enter the port number the client uses to communicate with the DVR over the internet. The default port is 7000. It is recommended to use a port above 1000. 2. Bandwidth: Select the network bandwidth to limit the amount of network resources allocate...
Page 55 - Stream Property: Is activated when you select dual streaming.; Way Audio: Support 2 way Audio between DVR and Remote Software.
54 5. Stream Property: Is activated when you select dual streaming. 6. Access Host and Host List: Allows you to access or deny specific IP address. To allow or deny remote access requires you to enter a range of IP addresses as an IP address and mask. Host List will be activated when you select deny...
Page 56 - SMTP; e-mail will be sent at selected intervals.; Retry Count; : Select the number of retry attempts to send e-mail after failure.
58 This DVR allows you to specify the events that generate notification. Sends e-mail notification if an event occurs, such as alarm, motion detected etc. The mail server can use either the DVR mail server or your existing e-mail settings. The menus are displayed with options in the left-hand column...
Page 57 - Log: This DVR will mail Log List at selected intervals.
59 5. Log: This DVR will mail Log List at selected intervals. 6. Attach Picture: While in recording mode, a picture can be attached to mail. 7. E-mail Address: 5 mail addresses can be configured for mail notification. 6.4. SMTP This menu is activated when you check <SMPT> on EMAIL. The followi...
Page 58 - Using the mouse, click the option to select DDNS provider.
60 6.5. DDNS (Dynamic DNS) This DVR offers free dynamic DNS update. It keeps track of your changing IP address. It’s easiest to use. The menus are displayed with options in the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the directional butt...
Page 59 - DYNDNS; : To use your own domain name service or “dyndns.com”
61 2) DYNDNS : To use your own domain name service or “dyndns.com” 2. The following settings are only needed if you are NOT using the default. 1) Domain Name: Enter the name you set for the DDNS web configuration. 2) User ID: Enter your user ID. 3) Password: Enter your password. 4) Update Test: Clic...
Page 62 - HDMI AUTO; lowest resolution without selecting HDMI AUTO.
64 7. DEVICE 7.1. GENERAL This DVR support 4/8/16 channel Audio, Alarm Inputs, 4 x Relay Outputs and supports HDMI output. 1. The menus are displayed with options in the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the directional buttons [ ]...
Page 63 - OUTPUT
65 2. Save changes and exit the menu, press the [MENU] button. Exit the menu without making changes, press the [CANCEL] button. 7.2. ALARM This DVR supports 4/8/16 Alarm Inputs and 4 x Relay Outputs. One Alarm Input can be configured to one Relay Output. One relay output can be assigned to multiple ...
Page 65 - GOTO
67 7.3. PTZ EVENT When an Alarm is triggered, Motion detected or Video Loss occurs, this DVR sends a preset command to a PTZ camera. The PTZ option must be enabled and a protocol must be assigned to the camera channel. 1. Channel: Select desired PTZ camera. 2. Active: Configure PTZ action [ NONE GOT...
Page 67 - Zone
69 8.2. TIME Make sure to set up your Date and Time before starting to Record. 1. Use Left/Right buttons [ ] to select on “Time” menu tab. The menus are displayed with options in the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the directiona...
Page 69 - Channel; Allow each user different live channels for monitoring.; Password
71 4) Channel Allow each user different live channels for monitoring. 5) Password Enter the 6 characters for the new password, and then re-enter the same password under the COMFIRM section. An asterisk is displayed for each character entered. 2. Save changes and exit the menu, press the [MENU] butto...
Page 70 - Root; button to find upgrade
72 8.4. UPDATE 1. Download the latest firmware file and copy to USB Flash memory stick in the Root directory. 2. Connect or insert into Front USB (please stop recording first). 3. Use directional buttons to move to the [Start] button. Press the [+] button to find upgrade files. If the DVR finds a va...
Page 72 - INDICATOR; “HELP”
74 VII. PAN/TILT ZOOM CONTROL PTZ control is available for supported third-party dome cameras. The PTZ option must be configured for each camera channel. For PTZ setup, refer to Camera Menu> PTZ setup . The layout of the PTZ interface conforms to the layout of the front of the DVR or the remote c...
Page 73 - How to Control PTZ Using a Mouse; Users can control PTZ camera using the mouse controller.
75 Zoom In and Out. 1.1 How to Control PTZ Using a Mouse Users can control PTZ camera using the mouse controller. It follows the mouse cursor instead of using the directional button to move. 1) Press the PTZ button on the virtual remote controller. 2) PTZ menu and control box is displayed like the p...
Page 74 - click the ESC button.; Button
76 5) To escape from PTZ mode, press the ESC button on the PTZ controller. Or click right button, outside the control box, to return to the virtual remote controller. Then click the ESC button. 2. Preset & Tour Button Function Set preset position; SPOT OUT on remote controller Move the PTZ into ...
Page 75 - step b
77 2.1 Tour Group A preset Tour Group allows a camera to move through a programmed sequence of PTZ presets. 1) Communication settings. :Configure appropriate model and then enter the corresponding baud rate, PTZ ID (address). Please refer to the PTZ manufacturer’s instruction manual for proper jumpe...
Page 76 - PTZ Camera Model – PAN/TILT/ZOOM Camera List
78 3. Custom Functions Button Function PTZ custom function 1; DISPLAY on remote controller PTZ custom function 2; ZOOM on remote controller PTZ custom function 3; P/T/Z on remote controller 4.Auto Pan / Auto Tilt / Power Button Function Auto Pan; STOP on remote controller Auto Tilt; REW on remote co...
Page 79 - Event Record Search; Press the “Event Select “ button to change search mode.
81 number, or the DISPLAY button, can be pressed to change the display mode. 2.3 Event Record Search Event Record search feature allows you to search for recorded video by event. The time search table displays time events. As a default, the TIME SEARCH CHART displays CONTINUOUS recording (Yellow) an...
Page 80 - Event Source Search; MOTION and VLOSS events previously triggered on the DVR.
82 <Note> EVENT RECORD is set by default and makes the TIME SEARCH CHART display EVENT recording in Red as above FIGURE 1. 2.4 Event Source Search Event source search feature allows you to search the recording data for ALARM, MOTION and VLOSS events previously triggered on the DVR. 1. Press [+...
Page 83 - MENU TAB; ) For more detailed information press
85 4. Log List Search The logs can be used to search, and to review, any point in time of the recorded data. Alarm, Motion, Video Loss and system related logs can be searched and played back directly from the time of the incident. . To start an Event Search, press the [Log] button on the IR Remote a...
Page 85 - run
87 The progress of the backup is displayed at the bottom of the window as a percentage of the entire backup process. Please note that the internal CD-RW icon’s colour will change to blue to signify that backup is in progress. The OSD disappears by pressing cancel button. However, pressing the Backup...
Page 86 - Back up Range Setup
88 1.2 External USB HDD/ Memory Stick The external drive procedure is the same as using the internal CD/DVD-RW for backup. To read USB backup HDD in Window, format to FAT32 or NTFS. To backup as an AVI File, set the file format to AVI using the [+] button. 1.3 Back up Range Setup Press the [ ◄ ▌ ] b...
Page 91 - Appendix 1: Time Zone Chart
93 Appendix 1: Time Zone Chart Standard Time Time Zone GMT+00:00 Standard European DST GMT+01:00 Standard European DST Namibia DST GMT+02:00 Standard Israel DST European DST Lebanon DST Jordan DST Russia DST Egypt DST GMT+03:00 Standard Russia DST GMT+03:30 Iran DST GMT+04:00 Standard Azerbaijan DST...
Page 92 - WEEE Symbol Information; Correct Disposal of This Product
WEEE Symbol Information Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates, that it should not be disposed with ...
