Genie AR90- User Manual
Genie AR90– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – NOTE: If you have made a mistake and; your; press the “Smart” or “Learn“ button,
- Page 4 – NOTE: Make sure that the GDK is aligned; times, the GDK will lock you out for on.
- Page 5 – FCC Authorization Label; ELECTRONICS; You in Control of Today’s Technology
Retain for Future Reference
Thank you for purchasing the One For A l l
Wireless Universal Garage Remote. Your
One For All Wireless Universal Garage
Remote (referred to as GDK throughout
the rest of the manual) is designed to
operate most garage door openers as well
as most gate openers manufactured after
1981*. Your GDK will operate the following
manufacturer’s products:
Before getting started, you will need your
original garage door opener transmitter.
You will use the original transmitter during
the setup of the GDK. If you do not have
your original transmitter, please refer to the
“WHAT TO DO IF YOUR ORIGINAL
TRANSMITTER HAS TWO OR THREE
BUT-TONS OR IS LOST OR BROKEN”
section after setting up your password.
l
Sears Craftsman (Most units)
Genie:
Model AR85 (9-Position Switch)
Model AR90 (12-Positions Switch)
Model SD9500 (12-Positions
Switch)
Stanley
Chamberlain (Most Units)
Linear
Moore-o-Matic
Multi-Code
Wayne Dalton
Lift-Master
Master Mechanics
Ambassador
Automatic DoorMan
Doorkeeper
Liftadoor
Multi El Mac
Raynor
Shima
Vemco
Crawford
Powerlift
Blue Max
EZ Lift
Your GDK package contains the following
items:
.
1 - One For All Wireless Universal
Garage Remote
.
1 - Users Manual
.
1 - 9-volt battery
.
2 - 1” flathead screws for mounting the
One For All Wireless Universal Garage
Remote
The GDK comes with one fresh 9-volt
battery. The battery is packaged inside the
battery compartment along with the two 1"
mounting screws, however, the battery is
not connected. To connect the battery:
1.
3.
Slide off the battery cover
and remove the battery and
two mounting screws.
Connect the battery.
Insert the connected battery
inside the battery
compartment and replace
the battery cover.
Smarthome.com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5. Press ENTER. The LEDs will now be lit according to how you placed the DIP switches. If the LEDs match your original garage door opener’s DIP switches, pressE N T E R again to store your code. The green LED will light for three seconds then the GDK will power OFF. Your garage door code has now bee...
2. Slide the GDK onto the screw, see figure 6. Figure 6 If your original transmitter has two or three buttons and uses DIP switches, set the #1 LED in the GDK to the opposite position on the first DIP switch of your original transmitter. Set the remaining GDK LEDs to the exact same position of your ...
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and radiates rad...
