Generation Lighting MCRC1T - User Manual

HANDHELD AND WALL MOUNT TRANSMITTER

INSTALLATION AND OPERATION INSTRUCTION

MCRC1T, MCRC1RT, MCRC2RT, MCRC3W,

MCRC3RW, MCRC4RW series

Warning

: Before proceeding, be sure to shut off electricity

at main switch or circuit breaker in order to avoid electrical

shock.

Note

: Before installing the wall transmitter, place it in OFF

position by pushing ON/OFF switch to the OFF.
Make series-wound connection for the wall transmitter with

HOT wire from house. Connect a black wire from wall

transmitter to the HOT wire and then connect the other wire

of wall transmitter to the LOAD wire in outlet box (Follow the

instruction shown on the labels on the lead wires from wall

transmitter).
Connect green grounded wire to grounded wire from outlet

box.
Install the wall transmitter to outlet box using machine

screws provided.
Attach wall plate to wall control unit with screws provided.

Note

: Place the wall transmitter in ON mode when fan

installation is completed.
The switch cover can be replaced with almond cover

provided. Remove it by finger and snap the new one in

place. (Fig. 1)

Wall Transmitter Installation

Wall cradle installation

Install Transmitter wall mount cradle with 2 screws provided

as shown in Fig. 2.
Install wall cradle with the direction as shown on back side of

the cradle.
Useful tips:
Take remote transmitter up by pushing it at lower area of the

transmitter.

The remote transmitter can be held on magnetic metal

material by a magnet built in the transmitter.

Wall

Box

Hot to

AC source

To load

Ground

Wall plate

Switch cover

Wall transmitter

Back side of the

wall mount cradle

ON

OFF

Fig. 1

Fig. 2