Generac HTSN400K3 - Manual
Generac HTSN400K3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
HTS
Automatic Transfer Switch
100 - 400 Amps 600 VAC
• Single coil design, electrically operated and
mechanically held
• Programmable exercise time
• SPDT aux contacts
• Main contacts are silver alloy
• Conformal coating protects the printed circuit board
• UL1008 Listed
• Indicating LED’s for switch position, standby
operating, utility available
• 3 position test switch: Fast Test, Auto, Normal Test
• Arc shutes on main contacts
• Signal before transfer contacts
• Rated to all classes of loads
• Remote start, stop and transfer through GenLink
®
Communications Software
• Up to four transfer switches per generator
• 50/60 hertz operation
STANDARD FEATURES
200 Amp HTS NEMA 1
DESCRIPTION
• The Generac HTS Transfer Switch is a “State
of the Art” Smart Switch designed to operate
in conjunction with the Generac H100 Series
generator controller.
• The HTS Transfer Switch has a 2 wire RS485
communication link to the generator controller.
• The utility voltage is monitored by the HTS
along with signal before transfer timing, time
delay neutral and inphase transfer.
• Switch operation is instigated by the generator
controller.
• All timers and voltage setpoints are
programmable through GenLink
®
Communications Software.
• Time delay neutral and inphase monitor are
included.
• NEMA 12 enclosure (100-400 Amps)
• NEMA 3R enclosure (All)
• NEMA 4 and 4x enclosure
• 4 pole for separately derived systems
OPTIONAL ACCESSORIES
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
