GEM ST-630E - Manual
GEM ST-630E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Indicators Status and Default Value
- Page 3 – Operation Instruction:; Controller Station Setting
- Page 4 – access record to duty; Wiring diagram
Copyright All Rights Reserved.
Page 1 of 5
P-MU-ST-630 Ver. A Publish: 2009.01.08
ST-630E Stand-Alone Access Control
Operation Manual
Ⅰ
Features
z
Master Card and Codes
z
Auto Reset Function
z
Security System Setting/ Release
z
Synchronize with Security System
z
Entering/Exiting Programming Mode: Only Proximity
Codes + Proximity, Codes or Proximity
z
Door Status Monitor Function
z
Anti Pass Back Function
z
Emergent Access Alarm, Time Delay Alarm and
Forced
Door Alarm
output
z
Dual relays programmable On/Off or pulsed or latched mode
z
LED Indicator to distinguish the status
z
Use for all kinds of the electric lock.
Ⅱ
.
The Specifications:
Part No.
ST-630E
Connection
Connection/ Stand-alone
/Users
1000
/Record Volumes
1000
Reader Application
WG26,WG34
Keys
12 Keys (0-9,*,#)
Interface RS485
Proximity Distance
About 125 and 15 cm/13.56 for around 7 cm
Proximity
Frequency
125Khz (EM)
Indicators 3
LEDs
Dimension (mm)
114(L) x 69.5(W) x 10(D)mm
Operating Voltage:
12 VDC
Temperature
-5 C-60 C
Humidity
5%-95%(Non-condensing)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Copyright All Rights Reserved. Page 2 of 5 P-MU-ST-630 Ver. A Publish: 2009.01.08 Ⅲ Indicators Status and Default Value Beep & LED indication: Mode Signal Status Yellow(flashing slowly) Power-on, stand-by Green On Valid entry, door relay active Normal Red Warning, invalid card or code, tamper, a...
Copyright All Rights Reserved. Page 3 of 5 P-MU-ST-630 Ver. A Publish: 2009.01.08 Ⅳ Operation Instruction: *xxxxxx# Enter Program Mode ， Enter 6-digital Codes ， (Default 123456) * # Exit Program Mode 01*xxxxxx xxxxxx # Change Default Password, Press twice new 6-digital Codes 02*xxxx # Controller Sta...
Copyright All Rights Reserved. Page 4 of 5 P-MU-ST-630 Ver. A Publish: 2009.01.08 Controller and Reader can open different doors. 34*99# Reset the function of Anti Pass Back. 35*x# (for connecting controller) x=1= access record to duty x=0= access record Not to Duty (x= default is 0) x=0 Green LED i...
