GEM DG-5 - Manual
GEM DG-5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Copyright Gianni Industries, Inc. All Rights Reserved.
PMUDG5 Ver. A Publish:2004.08.26 Page: 1/ 2
DG-5 The Digital Keyless Entry System
Operation User's Manual
1. Features:
4 digit codes
（
5 digit codes available by special order
）
Tamper Switch Included
Door Reed Switch Input for Anti-Trailing
10 user PINs
Fully Programmable via keypad and master code
Non-Volatile
Memory
Invalid PIN Lock-out
2. Specifications:
Operating Voltage: 9~14 Vdc
Current Draw: Average 20mA, Peak 70mA @ 12Vdc
Input: One request-to-exit, and time out reed switch
Relays: N.O./N.C./Com. Output (free voltage contact),
3A@ 125Vac or 30Vdc
Case Material: ABS
（
UL94V0
）
Operating
Temperature:-20~+70
℃
Ambient Humidity:0~95% relative humidity non-
condensing
Visual
Signals:
Green: Power on
Red: Relay activated
Yellow: Program Mode
、
Lock-out
Factory Master Code: 1234
Invalid PIN Lockout: System will shut down 60 seconds while 6 times of incorrectly
password attempted.
Relay Activation Time:
（＊
20
）
Pulse
mode
：
1~99 seconds
（
01~99
）
Latching
mode
（
00
）
EPROM: Non-volatile memory, System will retain all programs and codes after a total
loss of power.
User
PINs:
（＊
01~
＊
10
）
It is possible to program 10 different user PIN codes.
3. Program
Instruction:
Enter Program Mode:
1. Enter the master code twice (Factory master is
「
1234
」
)
→
2 beeps and the Yellow LED will light up.
→
you are now in the "programming mode".
2.
Note:
After 60 seconds if you have not entered any codes or data, the system will
automatically exit from the programming mode. After 6 wrong attempts at the master
code the lockout facility will operate.
Exiting from the program mode:
1. Press
「
#
」
to exit from the programming mode.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
