Page 3 - Index
Index General and safety information 1 Setting up 2 Fitting the battery 2 Setting the clock 3 Outgoing messages (OGMs) 4 Setting the number of rings you want the machine to answer after 5 Setting the ringer loudness 5 Plug the machine into the telephone socket 6 Telephone use 7 What do the buttons d...
Page 4 - What you can use your RP7510 with and what you can’t; Safety
1 RP7510 Congratulations on choosing a Geemarc RP7510. We at Geemarc want you to get themost out of our product. And that’s why we’ve developed a manual that’s easier to use. Soplease take the trouble to read it - and enjoy your RP7510 to the full. What you can use your RP7510 with and what you can’...
Page 5 - Setting up; Step 1: plug into the mains
2 Setting up Setting up: follow steps 1-7 Step 1: plug into the mains • Plug the adaptor lead into the back of the machine (be sure to push the plug fullyin). Set the volume control to mid-position. Then plug the adaptor into the wallsocket and switch on. Don’t plug into the telephone socket yet. • ...
Page 6 - Step 3: set the clock
3 Setting up Step 3: set the clock The machine speaks. If you set the clock, the machine will announce the time and day thateach message was left. What you need to know before you start • Don’t leave more than 15 seconds between button presses. otherwise you’ll have tostart again. • To programme a s...
Page 7 - For product support and help, visit our
Setting up Step 4: outgoing messages (OGMs) The machine already has two outgoing messages: OGM1 and OGM2. You can use thesemessages or record new ones. OGM1 lets the caller leave a message.OGM2 does not let the caller leave a message. A new OGM2 could be: ‘The surgery is nowclosed. Please call again...
Page 8 - Step 5: after how many rings do you want the machine to answer?; : set the ringer loudness
5 Setting up To record a new OGM11 Hold down OGM1 - speak after the beep - then release OGM1. The machine will play your message and ‘A1’ appears. 2 To hear OGM1 at any time, press OGM1. To record a new OGM21 Hold down OGM2 - speak after the beep - then release OGM2. The machine will play your messa...
Page 9 - Step 7: plug the machine into your telephone socket
6 Setting up Step 7: plug the machine into your telephone socket • The plug only fits in one way round. • If the little plug doesn’t fit your telephone socket, contact BT or your telephonecompany.
Page 10 - Telephone use; What do the buttons do?
Telephone use What do the buttons do? REDIALPress REDIAL to call the last number you dialled (useful if it was engaged). MUTEHold down MUTE if you don't want the other person to hear you (but you can still hearthem). RECALL, ✳ ✳ ✳ ✳ ✳ , # These are for new telephone services. To find out more, call ...
Page 11 - Basic Answering machine use; To set either OGM1 or OGM2
8 Basic Answering machine use To set either OGM1 or OGM2 Hold down ON/OFF for 2 seconds until you hear a beep. • If the red light’s on, OGM1 is set. • If the red light’s flashing, OGM2 is set. (OGM2 doesn’t let the caller leave a message.) To switch the answering machine on or off Press ON/OFF brief...
Page 12 - Basic answering machine use; If the memory’s full; To leave a memo (like leaving a note) for someone you live with
9 Basic answering machine use If the memory’s full When the memory’s full, ‘FL’ appears. ‘FL’ alternates with the message total. • If the memory’s full, the machine will answer after 15 rings using the OGM2 yourecorded. • The memory can hold 14 minutes of messages. Erase messages to make room fornew...
Page 13 - Advanced answering machine use; With remote access you can:
10 Advanced answering machine use Remote access :ringing in from outside and operating the machine With remote access you can: • listen to (and erase) messages and memos • listen to OGMs and record new ones • leave a message in a specific mailbox • switch the machine on or off • set OGM1 instead of ...
Page 14 - To listen to your messages remotely; To leave a message in a specific mailbox
11 Advanced answering machine use To listen to your messages remotely 1 Dial your number.2 During the OGM, press * . You’ll hear 3 beeps.3 Enter your security code.After 2 beeps you'll hear all your messages. Or, to hear only the new messages, press 6within 4 seconds. Points to remember: • Mailbox m...
Page 15 - To switch the machine on or off remotely; To set OGM1 instead of OGM2 remotely
12 Advanced answering machine use To switch the machine on or off remotely 1 Dial your number. If the machine's off, it'll answer after 15 rings. 2 *During the OGM, press S. You’ll hear 3 beeps. 3 Enter your security code. You’ll hear 2 beeps. 4 Within 4 seconds press 0 to switch on, or 8 8 to switc...
Page 16 - REMOTE ACCESS CARD; Remote access
To recor d a ne w outgoing messa g e (OGM) 1 Dial y our n umber . 2 Dur ing the OGM, press ✳✳✳✳✳ . You’ll hear 3 beeps . 3 Enter y our secur ity code . Y ou’ll hear 2 beeps . 4 Within 4 seconds , press 4 7 (for OGM1) or 4 9 (for OGM2). 5 Speak after the 4 beeps , then press 7. 6 To hear the ne w OGM...
Page 17 - Troubleshooting
14 Troubleshooting What do I do if . . . ? see page Nothing happens when you dial • Is the machine plugged into your telephone socket? 6 • Does your line accept tone dialling 1 ‘00’ flashesThis means the machine’s using its own OGM1 outgoing message. 4 If you record a new OGM1, ‘00’ stops flashing. ...
Page 18 - Additional safety
Guarantee (UK only) From the moment your Geemarc product is purchased, Geemarc Telecom Ltd guarantee if for the period of one year. During this time, all repairs orreplacements (at our option) are free of charge. Should you experience a problem then contact our helpline or the retailer from whom you...
Page 19 - Approvals
16 Approvals The apparatus has been approved for the use of the following facilities: • Simple telephone operation with ability to make calls to the 999 and 112 Emergency Services. • Multi Frequency (tone) dialling. • Automatic storage of last number dialled. • Timed break recall. • Telephone ringer...
Page 20 - For product support and help,; visit our website at
For product support and help, visit our website at www.geemarc.com or telephone : 01707 384438 or fax : 01707 372529
