GE PSB9100DFBB - User Manual

Advantium wall oven/GE Profile

™

Series cooking tower

dimensions and cabinet installation information (in inches)

Note: Cabinets
installed adjacent
to wall ovens must
have an adhesion
spec of at least a
194°F temperature
rating.
Note: 2" minimum
between cutouts
when installed
above warming
drawer or single
wall oven.
Installation

Information:
Before installing,
consult installation
instructions packed
with product for current
dimensional data.

Specification Revised 7/14

For answers to your Monogram

®

or GE

®

appliance questions, visit our website at

geappliances.com or call GE Answer Center

®

service, 800.626.2000.

Listed by

Underwriters

Laboratories

PSB9100DF

GE Profile

™

Series 27 in. Single Wall Oven with Advantium

®

Technology

1" Min. above toekick or adjust
to oven installation height

2" MIN between cutouts

3" MIN between cutouts
recommended—2" MIN required

9-1/4" cutout height
28-1/2" cutout width

Junction box location

A

B

A

B

Construct Solid Bottom
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)

4-3/16"

21-1/2"

To back

of Control

19-1/8"

26-3/4"

Conduit

(46" long)

Cabinet width

(240-volt models only)

CL

(Must support 130 lbs.)

2x4’s or

equivalent

solid floor

Suitable

bracing

to support

runners

21-5/8"

over centerline

of cabinet

25-1/4"

Cutout width

cabinet

width

Required

cutout location

36-3/4"

minimum

from floor

Junction box

location

(240-volt

models only)

A=Allow 1" overlap of oven over bottom edge of cutout.

B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.

4-3/16"

21-1/2"

To Back of Control

17-1/2"

Cutout height

A

B

23-1/2"

Cutout depth

Advantium Wall Oven Dimensions (in inches)and

Cabinet Installation (in inches)

Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.

Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)

Conduit

(48-1/2"

long)

19-1/8"

26-3/4"

1" Min. above toekick or adjust
to oven installation height

2" MIN between cutouts

3" MIN between cutouts
recommended—2" MIN required

9-1/4" cutout height
28-1/2" cutout width

Junction box location

A

B

A

B

Construct Solid Bottom
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)

4-3/16"

21-1/2"

To back

of Control

19-1/8"

26-3/4"

Conduit

(46" long)

Cabinet width

(240-volt models only)

CL

(Must support 130 lbs.)

2x4’s or

equivalent

solid floor

Suitable

bracing

to support

runners

21-5/8"

over centerline

of cabinet

25-1/4"

Cutout width

cabinet

width

Required

cutout location

36-3/4"

minimum

from floor

Junction box

location

(240-volt

models only)

A=Allow 1" overlap of oven over bottom edge of cutout.

B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.

4-3/16"

21-1/2"

To Back of Control

17-1/2"

Cutout height

A

B

23-1/2"

Cutout depth

Advantium Wall Oven Dimensions (in inches)and

Cabinet Installation (in inches)

Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.

Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)

Conduit

(48-1/2"

long)

19-1/8"

26-3/4"

1" Min. above toekick or adjust
to oven installation height

2" MIN between cutouts

3" MIN between cutouts
recommended—2" MIN required

9-1/4" cutout height
28-1/2" cutout width

Junction box location

A

B

A

B

Construct Solid Bottom
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)

4-3/16"

21-1/2"

To back

of Control

19-1/8"

26-3/4"

Conduit

(46" long)

Cabinet width

(240-volt models only)

CL

(Must support 130 lbs.)

2x4’s or

equivalent

solid floor

Suitable

bracing

to support

runners

21-5/8"

over centerline

of cabinet

25-1/4"

Cutout width

cabinet

width

Required

cutout location

36-3/4"

minimum

from floor

Junction box

location

(240-volt

models only)

A=Allow 1" overlap of oven over bottom edge of cutout.

B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.

4-3/16"

21-1/2"

To Back of Control

17-1/2"

Cutout height

A

B

23-1/2"

Cutout depth

Advantium Wall Oven Dimensions (in inches)and

Cabinet Installation (in inches)

Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.

Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)

Conduit

(48-1/2"

long)

19-1/8"

26-3/4"