GE JTP30DPWW - Manual

GE JTP30DPWW – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Loading the manual

Dimensions and Installation Information (in inches)

For answers to your Monogram,

GE Profile

™

appliance questions, visit our website at

ge.com or call GE Answer Center

service,

800.626.2000.

320228

Specification Created 5/09

JTP30DP

30" Built-In Single Wall Oven

Listed by

Underwriters

Laboratories

KW Rating

240V

4.5

208V

3.4

Breaker Size

240V

20 Amps

208V

20 Amps

Most 30" Wall Cabinets can be used with this unit.
Note:

These ovens are not approved for stackable

installations.

Note:

Cabinets installed adjacent to wall ovens

must have an adhesion spec of at least a 194°F

temperature rating.
Door handle protrudes 3" from door face. Cabinets

and drawers on adjacent 45° and 90° walls should be

placed to avoid interference with the handle.

Installation Information:

Before installing, consult

installation instructions packed with product for

current dimensional data.

Electric wall ovens are not approved for installation

with a plug and receptacle. They must be hard

wired in accordance with installation instructions.

Side-by-side installations require at least 2"

between cutouts.

2 x 4 or

equivalent

runners

Suitable

bracing

to support

runners

21-5/8"

over centerline

of cabinet

(must support 275 lbs.)

Cutout width
28-1/2'' MIN.
28-5/8'' MAX.

29-3/4

Recommended

cutout location

32-1/2"

from floor

Junction

box

location

Allow minimum of 21'' for clearance

to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.

B=Allow 11/16"– 3/4" for overlap of oven over side edges of cutout.

C=28-1/4" without trim and 28-3/4" with trim.

Conduit

48-1/2"

27-1/4'' MIN.
27-5/16'' MAX.
Cutout height

23-1/2'' MIN.

Cutout depth

22'' MIN.

2 x 4 or

equivalent

runners

Suitable

bracing

to support

runners

21-5/8"

over centerline

of cabinet

(must support 275 lbs.)

Cutout width
28-1/2'' MIN.
28-5/8'' MAX.

29-3/4

Recommended

cutout location

32-1/2"

from floor

Junction

box

location

Allow minimum of 21'' for clearance

to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.

B=Allow 11/16"– 3/4" for overlap of oven over side edges of cutout.

C=28-1/4" without trim and 28-3/4" with trim.

Conduit

(72"

long)

27-1/4'' MIN.
27-5/16'' MAX.
Cutout height

23-1/2'' MIN.

Cutout depth

22'' MIN.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.