Gateway Computer Monitor - Manual
Gateway Computer Monitor – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
SETTING UP YOUR GATEWAY MONITOR
2
Plug in the monitor
To protect your monitor from power fluctuations,
use a surge protector.
2
Plug in the monitor
To protect your monitor from power fluctuations,
use a surge protector.
1
Connect your monitor to your computer
Follow the instructions that came with your computer.
1
Connect your monitor to your computer
Follow the instructions that came with your computer.
3
Turn on the monitor
3
Turn on the monitor
* Available at www.gateway.com © 2005 Gateway, Inc. All rights reserved. Gateway is a trademark or registered trademark of Gateway, Inc. in the U.S. and other countries. Product specifications subject to change without notice. Actual product may vary from image shown.
2
Connect the USB power cord to a
USB port on your computer.
1
Tilt the screen back, center the speaker bar below
the screen, then tighten the thumb screws.
3
Connect the speaker bar’s headphone and microphone
cables to your computer, then turn on the speaker.
Digital DVI
(optional*)
Analog VGA
(supplied)
Connecting Your Flat Panel LCD Speaker Bar*
Getting Help
See your documentation
Refer to the documentation that came with your monitor
or go to gateway.com to get the online documentation.
Check Gateway Support
For frequently-asked questions, setup help, and
immediate information on common technical issues,
go to gateway.com
MAN FPD2085/2185 POSTER R2 12/05
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
