Garmin PRO 4900 - Manual - manualsarea.com

Page 2 - Printer Parts; Front

Printer Parts Front Back 1 Edge guide Paper support Paper cassette Roll paper cover Spindle holders Rear manual feeder Ink cartridges Roll paper feeder Printer cover Front cover Cartridge cover (left) Alert light Control panel Print head Ink maintenance tank Front manual feeder Output tray Borderfre...

Page 3 - Loading Roll Paper; Close the roll paper cover.

Loading Roll Paper 1 Slide the black paper stop off the end of the spindle. Note: To use paper with a 2-inch core, remove the gray adapters from the paper stops at each end. See your User’s Guide for details. 2 Position the roll as shown, then slide it onto the spindle. The gray end should be on the...

Page 4 - Loading Paper in the Paper Cassette; Removing Roll Paper

3 3 If your paper size is A3 or larger, extend the paper cassette to match the size of the paper. 4 Slide the edge guides outward. 5 Thumb through a stack of paper, then gently tap it on a flat surface to even the pages. Loading Paper in the Paper Cassette 1 Open the roll paper cover. 2 Press the bu...

Page 5 - Configuring Auto Nozzle Check and Cleaning; Automatically Checking and

4 6 Load the sheets in the portrait orientation, short edge first, with the printable side face-down. Place the paper all the way back, against the right side of the tray. Don’t load paper above the arrow mark inside the edge guide. Caution: When you add more paper, always line up the edges with the...

Page 6 - Configuring Auto Nozzle Check and Cleaning (continued); Manually Checking and Cleaning the; Aligning the Print Head

Configuring Auto Nozzle Check and Cleaning (continued) Manually Checking and Cleaning the Print Head1 Make sure paper is loaded. 2 Press the button to display the Ink Menu . 3 Press until NOZZLE CHECK is selected, then press . 4 Press to select AUTO NOZZLE CHECK , then press OK to start checking noz...

Page 7 - Checking Ink Levels and Replacing Ink Cartridges

Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or you can wait until the ink runs out, replace the cartridge, and then continue the job. Checking Ink and Maintenance Tank Levels The easiest way to check ink...

Page 8 - Checking Ink Levels and Replacing Ink Cartridges (continued); Replacing the Paper Cutter

4 Make sure the replacement cartridge is the correct color and remove it from its package. Gently shake the cartridge before installing it. 5 Hold the cartridge with the arrow mark pointing toward the printer. Then insert the cartridge into the slot. Don’t force it. Note: If you can’t insert the car...

Page 9 - Replacing the Maintenance Tanks; Replacing the Ink Maintenance Tank

Replacing Printer Parts (continued) 8 8 Align the cutter cover, then press it in until it snaps into place. 9 Replace the front cover. Note: If you are using the optional SpectroProofer, install it without replacing the front cover. 10 Close the printer cover and ink cartridge covers. Replacing the ...

Page 12 - Where To Get Help

11 Where To Get Help Service Access Telephone support Call (888) 377-6611. Make sure you have your Unit ID number. If you experience any difficulty with the toll-free number or your Unit ID number, call (562) 276-1305. Internet Go to epson.com/support to download drivers and firmware, access product...

Page 13 - QUICK; Control Panel Lights and Buttons

Eps on Sty lus ® Pr o 4 900 QUICK REF ERENCE GUIDE Printed in USA CPD-28116 Control Panel Lights and Buttons Paper feed down button Pause/reset lightand button Power light and button Paper feed up button Paper alert light Ink alert light Paper release (ePlaten ® ) button Paper cut button LCD screen ...

Garmin PRO 4900 - Manual

Table of Contents:

Summary

Other Garmin Models