Garmin GPSMAP 2008 - Manual

Garmin GPSMAP 2008

Garmin GPSMAP 2008 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
Page: / 124

Table of Contents:

  • Page 3 – GPSMAP; able; Warnings ��������������������������������������������������; Configuring System Settings
  • Page 4 – Using Sonar ���������������������������������������������; Specification
  • Page 5 – Warnings; MAP DATA INFORMATION:; • When navigating, carefully compare information; Hg; For more information go to:
  • Page 6 – eTTinG; Turning the Unit On or Off; Press and hold the; key until the unit; The first time you power on your unit,; NOTE: The manual is applicable to GPsMAP; Adjusting the Backlight; Press and release the; POWER; and press left or right on the; ROCKER; to manually adjust the backlight.
  • Page 7 – To switch between Day and Night mode:; Using the Keypad
  • Page 8 – —Press to return to the Home screen.; Acquiring GPS Satellite Signals; Do not try to navigate using; To turn on Simulator Mode; From the Home screen select; Configure
  • Page 9 – Viewing System Information; Restoring Factory Settings; This procedure deletes any information; To restore factory settings:; to restore all factory settings. Otherwise,; Inserting and Removing SD Cards
  • Page 10 – If using a new, blank SD card to transfer; Understanding the Home Screen; Charts; you must insert a preprogrammed BlueChart; sonar; This option is available only if you have; page; Information
  • Page 11 – sinG; view details on the waterwaly of a specific country.; Navigation Chart; Using the Navigation Chart; must insert a BlueChart; Navigation Chart with g2
  • Page 12 – Navigation Chart Settings; —view the; Full Screen Map; Overlay Numbers; navigation, and fishing numbers on the navigation or; Chart setup; —customize the navigation chart. See; Waypoints; —show user′s waypoint for navigation or; Routes; —create or select user′s route for navigation.
  • Page 13 – Panning the Navigation Chart; the; To stop panning, press , and then select; Stop; Zooming In and Out on the Map; To access additional object information:; On the navigation chart, highlight an item with
  • Page 14 – Select the item. If more than one item is in the; Review; Viewing Tidal Information; Tidal station appears on the chart with a detailed; and press; For more information about tides, see
  • Page 15 – Using the Split Navigation Chart; Range; Changing the Chart Settings
  • Page 16 – Changing the Chart Appearance
  • Page 17 – Using the Chart/Sonar Screen; Use the Chart/Sonar screen to view the Navigation; Select Navigation Chart to view both; Navigation; Navigation/Sonar Combination; Sonar; To access additional settings or options for the chart/; To set up Sonar setting:; Sonar Menu; Choose required settings for; Frequency; The; screen, is only available when using a sonar
  • Page 18 – here; You have to create waypoints and routes; Go To; Navigating to a Destination; Where To; -if destination is one
  • Page 19 – To search for a destination by name:
  • Page 20 – Creating and Using Waypoints; To mark your location:; Back; to return to the chart, or select; Man Overboard; to designate the waypoint as
  • Page 21 – To create a new waypoint:
  • Page 22 – To move the waypoint on the navigation; Creating and Using Routes; You can create and store up to 50 routes, with up to; To create a route from your present
  • Page 23 – begin navigating the route.; To create a route in another location:; Creating a New Route; to select the route’s starting; To edit a route; . You can edit the route
  • Page 24 – Select the route to delete, and then select; Route used as customized border on map; The routes can be shown individually
  • Page 25 – ieWinG; Use the Information screen to access information; Viewing Numbers; You can view and customize numerical data including; Press and select; Select the number of fields to show (
  • Page 26 – The first time you use the numbers; Viewing Tide Station Information; To view tide information, select; Tides; from the; show Report; show Tide; Viewing Celestial Information; Use the Celestial screen to view celestial data for sun; To view celestial information, on the Information; Celestial
  • Page 27 – Viewing User Data; tracks to and from an SD card.; To transfer data to or from an SD card:; Insert an SD card into the SD card slot on the; Viewing Other Boats; To view information about other boats,
  • Page 29 – onfiGUrinG; Use the Configure screen to configure unit settings.; Configuring System; Store Demonstration mode during the initial unit; Changing Units of Measure; defines most of the individual units of measure listed; You must be receiving NMEA Sonar depth
  • Page 30 – you are using a map or chart that specifies a different; uTC; Configuring; connect a Garmin GSD 21 or GSD 22 serially.; To enable or disable NMEA output
  • Page 31 – Waypoint; Setting Alarms; Setting Navigation Alarms; exceed a specified drift distance.; Arrival; a specified distance or time from a destination
  • Page 32 – course by a specified distance.; Setting System Alarms; Setting Sonar Alarms; above or below the specified temperature.; You must have a transducer connected.; To configure settings for your boat, from the Home
  • Page 33 – To adjust the Keel Offset:; to set the value of the keel; to show depth from the; Transducer at Surface; number to show depth; Transducer at Bottom; Transducer; The Sonar Cone Angles setting does not; • Calibrate; Bring the boat to cruising speed. Note your top
  • Page 34 – to enter your top speed,; speed Too low; Configuring Other Boats; To configure settings for boats other than your own,; —turn AIS (Automatic Identification System) on; To configure AIS or DSC information; zone ring to a specified distance from 0.1 to 2.0
  • Page 35 – powerful fishfinder/flasher. You can connect a Garmin; When using GSD 21, you can wire; Understanding the Full Screen; Understanding the Split Freq
  • Page 36 – Understanding The Split Zoom; Understanding the Temp Log
  • Page 37 – Setting Up Sonar; Use the Sonar Setup screen to define and adjust
  • Page 38 – To show water temperature or water; Auto; connected transducer is capable, the data is; Advanced Sonar Settings; —twice the magnification.
  • Page 39 – of that energy is reflected back to the radar.; To turn on the radar:; Transmit Radar
  • Page 40 – To turn off the radar:; Power; key on the; Go To Standby; Understanding the Cruising; RANGE; Cruising Screen Settings; Gain —
  • Page 41 – defines a safe zone around your boat.; Circular; standby cycle. Define the transmission time; FTC; clutter caused by rain at a distance.; Front of Boat; —offset the front of the boat if
  • Page 42 – Antenna Size; to Normal Speed or High Speed. High; Targeting on the Cruising Screen; with the range rings to help define the distance of an; stop Pointing; MARPA requires the use of a heading; MARPA Target
  • Page 43 – use GSD 21 OR GSD 22 as Sonar options.; nsTallinG; Install the Wiring Harness; the power wires, use 22 AWG wire. DO NOT cut the; 5 Volts DC. Do not exceed this voltage, because
  • Page 44 – During a typical installation, use only; To install the wiring harness:; connector, and turn the lock ring counter-
  • Page 46 – Connecting to a NMEA device; equipment, such as a DSC or AIS device. Refer to the; To install the wiring harness to a GPS or; for wire identification.; NMEA Out; Interfacing with NMEA; Out; Installing the Unit to a Garmin CANet; or Fishfinder to be shared with up to two CANet
  • Page 47 – Network. Please connect GSD 21 to NMEA Port 1 or; Test the Installation; To turn on your unit for the first time, press and hold; screens to configure your unit.; To configure your unit for the first time:; Select your preferred; your configuration options.; future from the Configure screen.
  • Page 48 – work properly. You cannot get a depth or distance; ppendix; Specifications; Physical Specifications; with adjustable brightness, 800 x 600 pixels, capable; Performance
  • Page 49 – used for Garmin Network devices such as Radar; Alarms and Messages; MENu; specified distance range.
  • Page 52 – not fit into memory. The oldest track log points were
  • Page 53 – Software License Agreement; BY USING THE UNIT, YOU AGREE TO BE BOUND BY; Limited Warranty
  • Page 54 – Online Auction Purchases:; from Garmin. Online auction confirmations are not accepted; International Purchases:; for your unit. Distributor warranties are only valid in the area
  • Page 55 – 用戶手冊
  • Page 56 – 目錄; 入門指南
  • Page 57 – 使用聲納系統
  • Page 58 – 開啟或關閉設備; 調節背光; 背光
  • Page 59 – 如需在白天和夜晚模式之間進行切換:; 使用鍵盤; 縮放
  • Page 60 – 接收GPS衛星信號; 在主屏幕中選擇
  • Page 61 – 恢復出廠設置; 您可以將設備恢復到原始出廠設置; 如需恢復出廠設置:; 擇“否”,取消操作。; 插入和取出SD卡; g2 SD卡即可查看詳細的海圖和陸; SD卡插槽位于設備右下角。; 如需插入SD卡,按下SD卡直至聽到; 如需取出SD卡,按下SD卡。SD卡即可彈出。
  • Page 62 – 認識主屏幕; 罗盘引导辅助
  • Page 63 – 使用導航圖; g2 海圖數據; 使用導航圖; 如需訪問導航圖,在主屏幕中選擇; 航海圖
  • Page 64 – 導航海圖設置
  • Page 65 – 平移導航圖; 在地圖上縮放顯示
  • Page 66 – 查看潮汐信息
  • Page 67 – 使用分屏導航圖; 分屏海圖; 更改分屏設置; 船首方向線
  • Page 68 – 更改航海圖外觀
  • Page 69 – 如需調節聲納設置:; 使用導航功能到達目的地; 想去何處
  • Page 70 – 導航到; 或者; 插入轉向點導航
  • Page 71 – 如需停止導航:; 停止導航; 如需按照名稱搜索目的地:; 完成; 創建和使用航點; 如需標記位置:; 返回; 如需創建一個新的航點
  • Page 72 – 如需編輯航點
  • Page 73 – 如需查看所有航點列表:; 創建和使用航線; 如需在另一個位置創建航線:
  • Page 74 – 鍵,增加轉向點。; 如需編輯航線; 選擇“編輯航線”。您可編輯航線名稱、轉; 如需刪除航線:
  • Page 75 – 在地圖上自定邊界路線
  • Page 76 – 查看信息; 查看航行數據; 如需查看數據屏幕,在主屏幕中選擇; 如需自定義數據屏幕:; 鍵並選擇; 配置
  • Page 77 – 查看潮位站信息; 查看天體信息; 查看用戶數據
  • Page 78 – 查看其他船隻; AIS 列表
  • Page 79 – 配置設備; 配置系統設置
  • Page 80 – 更改測量單位
  • Page 81 – 啟用或者禁用NMEA輸出語句:; 位置精度; 設置報警; 報警
  • Page 82 – 設置導航報警
  • Page 83 – 配置本船信息; 魚探器位于水面
  • Page 84 – 如需校準速度魚探器:; 配置其他船信息
  • Page 85 – 認識全屏功能; 認識分頻屏幕; 如需打開分區頻率屏幕,在主屏幕中; 選擇聲納
  • Page 86 – 認識分區縮放屏幕; 認識溫度日誌屏幕
  • Page 87 – 設置聲納; 滾動速度
  • Page 88 – 高級聲納設置; 範圍; 測試安裝設備
  • Page 89 – 开启雷达功能; 开启Garmin海图仪电源,雷达就会开始预
  • Page 90 – 关闭雷达功能; 巡航画面设置
  • Page 91 – 在巡航画面设定目标
  • Page 92 – 创建航路点; MARPA目标
  • Page 93 – 產品規格; 海圖支持:GARMIN; 存儲規格
  • Page 94 – 產品有害物質或元素自我宣告
  • Page 96 – 特 別 聲 明
  • Page 97 – 目 錄
  • Page 98 – 功能說明; 第一章 功能說明; 方向、偏離距離、到達時間。
  • Page 99 – GPS接收機部份
  • Page 103 – 開機定位; 注意; 第二章 開機定位; 基本上您會遇到下列兩種狀況:; (1)開機後第一次定位時間,約需45秒; (2)開機後第一次定位時間,需要5 分; 說明
  • Page 105 – 手動調整; 顯示模式(日、夜間顯示模式)
  • Page 106 – 基本設定; 第三章 基本設定; 【首頁】:回本機首頁畫面。; 模擬模式; 具有「關閉」、「開啟」、「設定」三選項; 語言設定; 「顯示」:參考第二章螢幕背光設定。
  • Page 107 – GPS設定; 「衛星狀態」:可知道目前衛星接收狀況。; 系統資訊
  • Page 108 – 系統單位; 目前航向; 設定您習慣使用的航向角度顯示:
  • Page 109 – 座標格式; 座標系統
  • Page 110 – 時間格式; 時間格式設定畫面; 時區設定; 設定您目前所在位置的適用時區。; 日光節約時間
  • Page 111 – 通訊埠形式; (一般均使用標準速率); 導航警示
  • Page 112 – 系統警示; 鬧鐘、電力、GPS定位準確度; 聲納警示; 深水、淺水水域、水溫、漁訊; 自動導引; 安全深度
  • Page 113 – 翻轉補償; 漁探器; 即設定外掛本公司漁探器時,雙頻漁探音鼓的; 當您要進入主目錄選取您所需要的功能時,只; 海圖畫面; 點選海圖選項後即可進入您想觀看的介面
  • Page 114 – 導航相關功能; 第四章 導航相關功能; 航點標定; 標定目前所在位置
  • Page 115 – 清除航點; 【首頁】:按本鍵
  • Page 116 – 航點導航; 航線建立
  • Page 117 – 航線導航; 清除航線
  • Page 118 – 要停止導航時有下列兩種方式可以操作; 在主目錄畫面時
  • Page 119 – 儲存航跡; 【儲存原始航跡】:選取本選項。
  • Page 120 – 航跡返航; 【返航】: 選擇本功能後即可執行返航導航。; 清除航跡; 【編輯航跡】:選取本選項
  • Page 121 – 進階功能(選項配備); 第五章 進階功能(選項配備); 聲納畫面說明
  • Page 122 – 連接與暖機; 縮放地圖的比例尺
  • Page 123 – 畫面資訊設定
  • Page 124 – Garmin Corporation; Part Number
Loading the manual

GPSMAP

®

2008/2108

owner’s manual

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - GPSMAP; able; Warnings ��������������������������������������������������; Configuring System Settings

GPSMAP ® 2008/2108 Owner’s Manual i T able of C onTenTs T able of C onTenTs Warnings �������������������������������������������������� 1 Getting Started ����������������������������������������� 2 Turning the Unit On or Off ������������������������ 2Adjusting the Backlight �������������������������...

Page 4 - Using Sonar ���������������������������������������������; Specification

ii GPSMAP ® 2008/2108 Owner’s Manual T able of C onTenTs Using Sonar ��������������������������������������������� 31 Understanding the Full Screen ���������������� 31Understanding the Split Freq Screen������ 31Understanding The Split Zoom Screen��� 32Understanding the Temp Log Screen ����� 32Settin...

Page 5 - Warnings; MAP DATA INFORMATION:; • When navigating, carefully compare information; Hg; For more information go to:

GPSMAP ® 2008/2108 Owner’s Manual 1 W arnings Warnings Important Information MAP DATA INFORMATION: One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data so...

Other Garmin Models