Page 2 - Imprint; purpose whatsoever without the express written consent of
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of- life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint Garmi...
Page 3 - Table of contents
User’s manual SEAT Portable System User’s manual Table of contents III Table of contents 1 Introduction ....................................................................................... 9 1.1 About this manual ................................................................................ 9...
Page 4 - Specifying the country in which the destination is
User’s manual SEAT Portable System IV Table of contents User’s manual 5.3 Options .............................................................................................. 30 5.4 Menus ............................................................................................... 30 6 Voice c...
Page 5 - POI-Import: Importing your own POIs onto the
User’s manual SEAT Portable System User’s manual Table of contents V 9.4 Map in Navigation mode .................................................................... 65 9.4.1 Navigation in Vehicle mode................................................. 66 9.4.2 Navigation in Pedestrian mode ............
Page 6 - Open the applications of the Performance Display
User’s manual SEAT Portable System VI Table of contents User’s manual 10.16 Special functions for electric vehicles ......................................... 99 10.16.1 Multi-Stop route .................................................................. 99 10.16.2 Driving range warning ...............
Page 7 - Calling most recently dialled, received or missed
User’s manual SEAT Portable System User’s manual Table of contents VII 12.2 Media Player ................................................................................... 132 12.2.1 Supported audio files ........................................................ 134 12.2.2 Selecting a media source...
Page 9 - Introduction; About this manual; Conventions; Bold and italics; Bold; Underlined and italics; Symbols
User’s manual SEAT Portable System Introduction - 9 - 1 Introduction 1.1 About this manual 1.1.1 Conventions For better legibility and clarification, the following styles are used in this manual: Bold and italics : Names of products S MALL CAPITALS : Names of windows and dialogue boxes Bold : Highli...
Page 10 - Legal notice; Liability; Questions about the product; Before you begin; Scope of delivery
User’s manual SEAT Portable System - 10 - Before you begin 1.2 Legal notice 1.2.1 Liability The software and manual are subject to change without notice. Garmin Würzburg GmbH is not liable for the accuracy of the information contained in this manual or for damages resulting from the use of this manu...
Page 11 - Description of the navigation device; Slot for microSD memory card; Important safety information; warnings carefully before starting up your navigation system.
User’s manual SEAT Portable System Before you begin - 11 - 2.2 Description of the navigation device 1 Touch-screen 2 On/Off 3 Slot for microSD memory card 4 Microphone 5 Mini USB socket for USB cable / mains adapter 2.3 Important safety information In your own interest, please read the following saf...
Page 12 - Navigation safety information
User’s manual SEAT Portable System - 12 - Before you begin 2.3.1 Navigation safety information Use the navigation system at your own risk. Caution! To prevent accidents, do not operate the navigation system while driving. Caution! Do not look at the screen unless it is absolutely safe to do so! Caut...
Page 13 - Fresh; Mounting/removing the navigation system; Removing the navigation device; Removing the navigation device from the cradle
User’s manual SEAT Portable System Before you begin - 13 - Note: Create a backup of the data which exist in the internal memory of your navigation device. This is very easy to do with the Fresh software which can be downloaded free of charge from our website www.garmin.com/pid . 2.4 Mounting/removin...
Page 14 - Removing the cradle; Mounting the navigation device; Be sure to refer to all the safety information in the chapter; Removing the cover; In the middle of the dashboard is the opening for the cradle of the; Fitting the cradle; On the back of the navigation device you will see a circle with two
User’s manual SEAT Portable System - 14 - Before you begin Removing the cradle 1. Press the button at the bottom of the cradle (see figure). 2. Holding the button pressed, take the cradle out of the opening. Fitting the cover 1. Place the cover over the opening. 2. Press the cover fully into the ope...
Page 15 - Supplying power to the navigation device; Memory card
User’s manual SEAT Portable System Before you begin - 15 - Supplying power to the navigation device The navigation device is supplied with power via the cradle as soon as the vehicle ignition or radio is switched on. At the same time the device's battery is charged so that it can also be used outsid...
Page 16 - Navigating with GPS; Switching the navigation device on and; On
User’s manual SEAT Portable System - 16 - Switching the navigation device on and off 2.5 Navigating with GPS GPS is based on a total of at least 24 satellites orbiting the Earth and continuously transmitting signals of their position and time. The GPS receiver receives this data and calculates its o...
Page 17 - Off; Device mounted in the vehicle; Switching on the device; Screensaver
User’s manual SEAT Portable System Switching the navigation device on and off - 17 - ► Off : When you switch off the device, it consumes no energy. It can then take several months for the battery to become flat. Switching the device on again triggers a restart which can take some time (approx. 60 se...
Page 18 - Switching off the screensaver; Device not mounted
User’s manual SEAT Portable System - 18 - Switching the navigation device on and off Using the Fresh software you can install a function which allows you to select the picture you want to use as the screensaver. Fresh can be downloaded free of charge from the website www.garmin.com/pid . The date, t...
Page 19 - Forgotten your password?; Switching off the device; Starting the navigation device for the first time
User’s manual SEAT Portable System Switching the navigation device on and off - 19 - Forgotten your password? It can happen that you activate the password but are then unable to remember it. ► If you forget your password, follow the procedure described in "Forgotten your password?" on page 2...
Page 20 - Manual
User’s manual SEAT Portable System - 20 - Switching the navigation device on and off The S TART window opens. From the S TART window you can access all the applications of the navigation device: ► Navigation, see page 32 ► Car info, see page 111 ► Media, see page 128 ► Phone, see page 141 Note: You ...
Page 21 - Options; Password lock; Activating password protection
User’s manual SEAT Portable System Password lock - 21 - The content of the chapter is shown. With the (Up) and (Down) buttons you can scroll up one page and down one page respectively. With the (To the left) and (To the right) buttons you can open the previous or the next chapter respectively. ► Tap...
Page 22 - Changing a password; Cancelling password protection; Operating the navigation system; Information
User’s manual SEAT Portable System - 22 - Operating the navigation system 4.1.1 Changing a password 1. In the N AVIGATION window tap on More functions > Settings > Options > Password lock. The E NTER PASSWORD window opens. 2. Enter the currently valid password in the Enter password box. 3. ...
Page 23 - GPS
User’s manual SEAT Portable System Operating the navigation system - 23 - GPS The GPS symbol can show the following GPS reception states: No GPS (No symbol): The built-in GPS receiver is not operational. Contact us if the problem persists (see "Questions about the product" on page 10). No si...
Page 24 - Energy; Live Services; Live; Live; Connecting; Live
User’s manual SEAT Portable System - 24 - Operating the navigation system Energy The Energy symbol can indicate the following states of the integrated battery: The device is mounted in the vehicle and is being supplied with power from the vehicle. The battery is fully charged. The device is mounted ...
Page 25 - Traffic information
User’s manual SEAT Portable System Operating the navigation system - 25 - ► The mobile radio connection is interrupted. ► The Live server is not answering. (Light grey) Live Services ready : There is a connection to the Live server. The Live services are available. The number indicates which of the ...
Page 27 - Muting
User’s manual SEAT Portable System Operating the navigation system - 27 - Muting The Muting symbol can indicate the following states: No symbol : The navigation application is not muted. Muting : The navigation application is muted. If the device is navigating at the moment, you will not hear any dr...
Page 28 - CD; Software keyboard; Special keys; Latin, Cyrillic and Greek alphabet
User’s manual SEAT Portable System - 28 - Operating the navigation system AUX-IN audio : The current audio source is an external device which is connected to the AUX port of the car radio. BT-Audio : The current audio source is an external device (mobile phone or smartphone) which is connected to th...
Page 29 - Umlauts, accents and other letters; Entering data
User’s manual SEAT Portable System Operating the navigation system - 29 - You can also switch from the Cyrillic or Greek keyboard to the Latin keyboard. Many addresses can then also be entered as transliterations or in the language of the user interface. Example: The language of the user interface i...
Page 30 - Voice command; Activating the voice command function
User’s manual SEAT Portable System - 30 - Voice command ► Tap on (Open list) in order to call up this list. You can use the (Up) button and the (Down) button to move through the list. ► Tap on an entry in the list to select it and transfer it to the input box. The list closes once an entry has been ...
Page 31 - Use voice command; Voice command active; Help
User’s manual SEAT Portable System Voice command - 31 - 6.2 Use voice command When the functions in a window can be called up by voice command, this is indicated in the top left corner of the window by the symbol ( Voice command active ). A single signal tone and the symbol ( Speak ) indicate that t...
Page 32 - Navigation; Impaired GPS reception
User’s manual SEAT Portable System - 32 - Navigation Select the tasks for which you want to use Voice Command: ► Complete: You can use all the voice command functions. ► Answering: You can enter addresses and answer questions asked by the navigation device. ► Entering addresses: You can enter only a...
Page 33 - Starting the navigation application; Returning to the Start window; Initialising the GPS receiver; GPS ready
User’s manual SEAT Portable System Navigation - 33 - 7.1 Starting the navigation application You have switched on the navigation device. The S TART window is open. ► Tap on Navigation. The N AVIGATION window is opened. From here you can access all the functions of the navigation application. Returni...
Page 34 - Returning to the Navigation window; Specifying a destination; Specifying the country in which the destination is situated; POI
User’s manual SEAT Portable System - 34 - Navigation Returning to the Navigation window The N AVIGATION window opens when the navigation application is started. If another window of the navigation application is open, tap on (Back). This will return you to the window you came from. ► Tap on (Back) r...
Page 35 - Entering a destination by voice commands; Entering an address; Entering a POI nearby; Preview; Entering a Favourite or an address from the phone book
User’s manual SEAT Portable System Navigation - 35 - If your destination is in a different country, then proceed as follows: 1. Tap on the Country button. 2. Enter the name of the country in which your destination is situated. The button shows the flag of the destination country. Note: The selection...
Page 36 - Entering a destination address
User’s manual SEAT Portable System - 36 - Navigation 4. Say the number of the destination to which you want to navigate. Say "Up" or "Down" in order to scroll in the list. When you have selected a destination, the map opens in Preview mode. The destination is indicated on the map. Fo...
Page 37 - Enter coordinates
User’s manual SEAT Portable System Navigation - 37 - 4. Tap on Start navigation in order to navigate to the stipulated address. - or - Tap on Parking in order to search for and navigate to a car park near your destination. Tap on Parking Charging > Charging near the destination in order to search...
Page 38 - Entering as a decimal number
User’s manual SEAT Portable System - 38 - Navigation Entering as a decimal number 2. Enter the degree of latitude. Begin the entry with a minus sign if you want to enter a southern degree of latitude. 3. Enter the degree of longitude. Begin the entry with a minus sign if you want to enter a western ...
Page 39 - Offroad; Points of interest; MyPOIs; POI nearby
User’s manual SEAT Portable System Navigation - 39 - Note: If the destination with the coordinates you entered does not lie on the road system covered by the map, navigation will be performed as far as the nearest road point using the mode defined by the selected route profile. From this point on, t...
Page 40 - POIs of nationwide significance
User’s manual SEAT Portable System - 40 - Navigation 2. Select a category from which you would like to find a POI. Categories in which no destinations are available nearby cannot be selected. If sub-categories exist for the category you have selected, the Sub category list opens. 3. Select the sub-c...
Page 41 - POIs in a particular location
User’s manual SEAT Portable System Navigation - 41 - 2. Select a category from which you would like to find a POI. The Destination list opens. It contains the POI from the selected category, sorted alphabetically. 3. If the list is very long: ► Tap on (Close list). The keyboard appears. ► Enter a nu...
Page 42 - Direct access to POI
User’s manual SEAT Portable System - 42 - Navigation 4. Select the sub-category from which you would like to select a POI. The Destination list opens. It contains POIs from the specified category, sorted alphabetically. 5. If the list is very long: ► Tap on (Close list). The keyboard appears. ► Ente...
Page 43 - Information about the destination
User’s manual SEAT Portable System Navigation - 43 - Note: GPS reception must be good enough for determining your position. Check the (GPS ready) symbol to see whether GPS reception is good enough. If GPS reception is not good enough, the system will look for POIs near the last known position. If th...
Page 44 - Favourites
User’s manual SEAT Portable System - 44 - Navigation Note: The Call function is only available when the navigation system is connected via Bluetooth to a mobile phone. For details of how to connect to a mobile phone refer to chapter "Bluetooth connection" on page 143. 7.2.8 Favourites Destin...
Page 45 - Last destinations; Imported addresses from the phone book
User’s manual SEAT Portable System Navigation - 45 - 7.2.9 Last destinations The last 12 destinations to which you have navigated are saved by the navigation system in the L AST DESTINATIONS list. 1. In the N AVIGATION window, tap on My destinations > Last destinations. 2. Tap on the destination ...
Page 46 - Navigating home; Selecting destinations on the map; destination search
User’s manual SEAT Portable System - 46 - Navigation Tap on Parking Charging > Charging near the destination in order to search for a charging station near the destination. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation,...
Page 47 - Route preview; Route profile
User’s manual SEAT Portable System Navigation - 47 - The D ESTINATION ON MAP window opens. The detailed address data of the selected destination is displayed in the upper left-hand corner. 5. Tap on Take me there. The map opens in Preview mode. The destination is indicated on the map. For detailed i...
Page 48 - MyRoutes
User’s manual SEAT Portable System - 48 - Navigation MyRoutes When the MyRoutes function is activated, the navigation system calculates up to three routes on the basis of the currently selected route profile and shows them on the map in different colours (red, green, blue) and with a number. For eac...
Page 49 - No GPS reception; Managing destinations; Saving destinations
User’s manual SEAT Portable System Navigation - 49 - Note: Traffic information (TMC) is then available to a limited extent only. No GPS reception If GPS signal reception is not good enough, the following message will appear: "Waiting for GPS-Signal…" You have the following options: ► Wait. A...
Page 50 - Deleting a destination from the Favourites list
User’s manual SEAT Portable System - 50 - Navigation 4. Tap on Save. 5. The C HARGING STATION window opens. There you can specify whether the indicated destination is a charging station at which the vehicle can be charged (Normal charging station or High-speed charging station) or not (No). If you s...
Page 51 - Selecting the home address from your favourites
User’s manual SEAT Portable System Navigation - 51 - If you have already saved favourites, the message will be as follows: "Do you want to enter the address, or do you want to select it from the favourites?" The currently valid value is highlighted (red). ► If Enter an address is NOT highlig...
Page 52 - Changing the home address; Tracks and multi-leg routes; Entering the starting point
User’s manual SEAT Portable System - 52 - Navigation 5. The C HARGING STATION window opens. There you can specify whether you can charge your vehicle at the indicated destination (Normal charging station or High-speed charging station) or not (No). If you save the destination as a charging option, i...
Page 53 - Changing the starting point; Entering route points
User’s manual SEAT Portable System Navigation - 53 - The starting point is only important if you want to see a planned route on the map but currently have no GPS reception, or if you are not currently at the planned starting point. This is why your selected starting point has the flow number "0&...
Page 54 - Editing route points
User’s manual SEAT Portable System - 54 - Navigation 4. Tap on (Add). The selected route point is now shown next to its flow number. Repeat these steps for each destination that you want to add to your route. 7.4.3 Editing route points Route points can be deleted from a route. The order of the route...
Page 55 - Loading routes or tracks; Calculating and displaying routes
User’s manual SEAT Portable System Navigation - 55 - 3. Tap on (Save). If a route has already been saved under this name, you will be notified accordingly. ► Tap on Yes to overwrite the route - or - ► Tap on No if you want to enter a different name. The destination is now saved to the S AVED ROUTES ...
Page 56 - Simulating routes; Stopping simulation
User’s manual SEAT Portable System - 56 - Navigation ► Tap on Show route. The map opens in Preview mode. The starting point and the route points are marked by flags. The distance and the estimated trip time is given for each leg of the route. 7.4.7 Simulating routes It is also possible simply to sim...
Page 58 - Start navigation
User’s manual SEAT Portable System - 58 - Navigation Start navigation ► Tap on the button of the route which you want to use for the navigation. Traffic obstruction along the route If you select a route for which traffic obstructions have been announced, the P REVIEW TMC window may open before the n...
Page 59 - Options, more functions
User’s manual SEAT Portable System Options, more functions - 59 - 8 Options, more functions From some windows you can reach more functions. 1. In the N AVIGATION window tap on More functions. - or - Tap on Options. 2. Tap on the option you would like to use. ► If you would like to quit the options l...
Page 61 - Standard
User’s manual SEAT Portable System Options, more functions - 61 - Save as favourite: Saves the selected destination to the F AVOURITES list (see "Saving destinations" on page 49). Save destination: Saves the selected address in the F AVOURITES list (see "Saving destinations" on page ...
Page 62 - Working with the map; Selecting the navigation map; Map in Standard mode; Vehicle
User’s manual SEAT Portable System - 62 - Working with the map 9 Working with the map 9.1 Selecting the navigation map Each country has its own navigation map. However, seamless navigation over several countries on one continent is possible if a continuous route can be planned on the maps saved. Eve...
Page 63 - The following features are typical for this view:; Map options in Standard mode; A description of all available options can be found in the chapter
User’s manual SEAT Portable System Working with the map - 63 - The following features are typical for this view: ► Indicated in the middle of the lower third is your current position (red arrow). The map view follows your movements so that your position is always visible on the screen. ► The scale o...
Page 64 - Map in Preview mode
User’s manual SEAT Portable System - 64 - Working with the map 9.3 Map in Preview mode You have entered a destination and tapped on Start navigation. - or - You have planned or loaded a route and tapped on Show route. The map opens in Preview mode. 1 The current route profile is indicated on the (Ro...
Page 65 - Map in Navigation mode
User’s manual SEAT Portable System Working with the map - 65 - In the following cases only one route is shown: ► The MyRoutes function is deactivated. ► You have planned a route with more than one route point. ► A route profile with the Pedestrian speed profile is active. ► The route includes a trac...
Page 66 - Navigation in Vehicle mode
User’s manual SEAT Portable System - 66 - Working with the map 9.4.1 Navigation in Vehicle mode After the route was shown in Preview mode, navigation was started. The map opens in Navigation mode. 1 If any information is available about the sign which you should follow, it will be shown at the top e...
Page 67 - TMC
User’s manual SEAT Portable System Working with the map - 67 - 6 The large arrow box shows a diagram of the next junction which you should turn on to. The distance remaining to this junction is indicated underneath. As you get closer to the junction you will see a bar in addition to the distance: Th...
Page 68 - Sightseeing; Total
User’s manual SEAT Portable System - 68 - Working with the map 9 When you get close to a Sightseeing sight, the Sightseeing button will appear instead of the height above sea level and the speed (point 10). The distance indicated on the button tells you how far away the sight is (beeline). If you ta...
Page 69 - Volume; When the device is mounted in the vehicle:; Reality View
User’s manual SEAT Portable System Working with the map - 69 - ► Tap on Options > Route > Turn-by-Turn list in order to view a turn- by-turn list (see "Turn-by-Turn list" on page 95). ► Tap on (destination search) to view the map in destination search mode (see "Map in destination ...
Page 70 - Navigation in Pedestrian mode
User’s manual SEAT Portable System - 70 - Working with the map The Reality View mode shows with greater clarity the signposting and lanes you must follow. This display does not change until you have passed the spot indicated. The map will then change back to Navigation mode. ► If you want to change ...
Page 71 - Operating the map
User’s manual SEAT Portable System Working with the map - 71 - ► If you are navigating on a route and more route points are still to follow, navigation to the next route point will be started immediately after the message. ► Traffic messages are not taken into account. Note: In pedestrian mode you m...
Page 72 - Navigation in Track mode; Navigation in Offroad mode
User’s manual SEAT Portable System - 72 - Working with the map Zoom in: The map section becomes smaller, but you will see more details. Centre the position: During pedestrian navigation you can shift the visible map section in order to view the surrounding area on the map. This may mean that your cu...
Page 73 - Map options in Navigation mode; Map in destination search mode
User’s manual SEAT Portable System Working with the map - 73 - If you enter a destination which lies off the digitalised road system, the navigation will guide you first in Vehicle mode to the point of the digitalised road system that lies nearest to the destination. From here the navigation then co...
Page 75 - Operating in destination search mode
User’s manual SEAT Portable System Working with the map - 75 - 9.5.1 Operating in destination search mode 1. Tap on the point to which you want to navigate. The destination that you have selected appears under the cross hairs. The geographical coordinates of the destination and the corresponding add...
Page 76 - Showing the range; One way
User’s manual SEAT Portable System - 76 - Working with the map 9.6 Range 360 map view The Range 360 map view shows the possible radius of action on the map. The current battery charge and the level of consumption are considered. The area lying within range is highlighted. The display is continuously...
Page 77 - Reliable return; The highlighted area shows the distance you can travel from your; Both
User’s manual SEAT Portable System Working with the map - 77 - Reliable return The highlighted area shows the distance you can travel from your current position and still return reliably to the home address. Note: The radius of action for the return trip can be shown only if the indicated home addre...
Page 78 - Configuring the Range 360 map view; Useful functions; Route profiles; Route profile settings
User’s manual SEAT Portable System - 78 - Useful functions The larger of the two highlighted areas corresponds to the One way view. The smaller of the two areas indicates the distance you can still drive from your current position and still reach the home address reliably on the subsequent return tr...
Page 79 - Basic profiles
User’s manual SEAT Portable System Useful functions - 79 - ► Use of toll roads: defines whether toll roads are allowed to be used when calculating the route ► Tap on the (Edit) button. The U SE OF TOLL ROADS window opens. ► Adapt the individual settings to your needs (Yes, No, Ask before) (see also ...
Page 80 - Selecting a route profile; Managing route profiles; Editing a route profile
User’s manual SEAT Portable System - 80 - Useful functions 2. Tap on the (Current route profile) button. This button can also show a different symbol. 3. Tap on the name of the route profile which you want to take as basis for the new profile. 4. Tap on Options > Copy. 5. Enter a name for the rou...
Page 81 - Renaming a route profile
User’s manual SEAT Portable System Useful functions - 81 - If you activate the Ask before setting, each time the route preview wants to calculate a route with a toll road you will be asked whether you want to use the type of toll roads in question. You can then lay down this setting for future journ...
Page 82 - Creating your own destinations
User’s manual SEAT Portable System - 82 - Useful functions 10.2 MyPOIs You can create files with your own POIs. These files have to be made available to your navigation system in a specific folder. If you want to choose from your own POIs, you will find them under the MyPOIs category of POIs. Each f...
Page 83 - 931~Best Navigation Devices; Symbols for your own POIs; bmp; POI-Import: Importing your own POIs onto the navigation
User’s manual SEAT Portable System Useful functions - 83 - Example: 9.94302,49.79906,Garmin Würzburg GmbH,PHONENUMBER=+4 9 931~Best Navigation Devices 3. Repeat step 2 for each destination you want to save in this file. 4. Click on File > Save. 5. Select a folder in which you want to save the dat...
Page 84 - Tracks; Recording a track; Record track; Stopping the recording; Using a track for navigation
User’s manual SEAT Portable System - 84 - Useful functions 10.3 Tracks You can record any section of a route you take, even if it lies off the digitalised road system. You can record for example a bicycle tour and follow the same route again some time later. Tracks are saved in KML data format. KML ...
Page 85 - Parking close to the destination; Continuing on foot; Pedestrian; Searching for a car park
User’s manual SEAT Portable System Useful functions - 85 - Note: When you are navigating along a recorded track, any incoming TMC messages will not be checked to see if they concern the track in question. 10.4 Parking close to the destination When you get close to your destination, the (Parking) but...
Page 86 - Clever Parking: Current information about parking options; Clever Parking; Back to the destination
User’s manual SEAT Portable System - 86 - Useful functions You are shown more information about this car park. 4. Tap on Add. 5. The navigation now guides to the selected car park in the mode corresponding to the selected route profile. 6. Tap on OK. The position of your vehicle is marked on the map...
Page 87 - Nearby; MyBest POI: POIs on your route
User’s manual SEAT Portable System Useful functions - 87 - You will be shown more information about this charging station. 4. Tap on Add. 5. The navigation now guides to the selected charging station in the mode corresponding to the selected route profile. 6. Tap on OK. The position of your vehicle ...
Page 88 - Displaying POIs along the route; POIs on your route
User’s manual SEAT Portable System - 88 - Useful functions 10.6.1 Displaying POIs along the route 1. Tap on the (POIs on your route) button which appears at the top left of the map (see point 2 in "Navigation in Vehicle mode" on page 66). The POIs on your route bar opens. It shows symbols of...
Page 89 - Navigating to one of the destinations
User’s manual SEAT Portable System Useful functions - 89 - 2 The list contains the next 5 POIs, sorted by distance in descending order, which lie along your route and are in the stipulated category. The nearest POI is therefore the lowest entry in the list. 3 Voice command: Opens the V OICE COMMAND ...
Page 90 - Activating pointers to Sightseeing sights
User’s manual SEAT Portable System - 90 - Useful functions 6. The POI S ON YOUR ROUTE list opens. If there are POIs of the newly selected category along the route, they will already appear in the list. 7. Tap on (Back) in order to close the list. The map opens. 10.7 Sightseeing Sightseeing sights ar...
Page 91 - Displaying information about a Sightseeing sight
User’s manual SEAT Portable System Useful functions - 91 - Note: During navigation in Pedestrian mode you will receive a pointer only when your destination is a Sightseeing destination and you are getting close to your destination. Displaying information about a Sightseeing sight ► You have chosen t...
Page 92 - Sightseeing tours
User’s manual SEAT Portable System - 92 - Useful functions 10.8 Sightseeing tours Sightseeing tours are predefined routes with destinations of scenic, cultural or touristic interest which are sorted according to various categories. Note: The navigation software contains only a limited number of sigh...
Page 93 - Direct help
User’s manual SEAT Portable System Useful functions - 93 - You can also edit the various legs. You can add new legs, delete legs and change their order. For details of how to edit the route refer to the chapter "Tracks and multi-leg routes" on page 52. ► Tap on Show route. The map opens in P...
Page 94 - GPS status, saving the current location
User’s manual SEAT Portable System - 94 - Useful functions Note: The Call function is only available when the navigation system is connected via Bluetooth to a mobile phone. For details of how to connect to a mobile phone refer to chapter "Bluetooth connection" on page 143. ► You can use the...
Page 95 - Unblocking a route section
User’s manual SEAT Portable System Useful functions - 95 - Note: If you are currently driving on a motorway, the alternative route will begin at the next exit. Indicated on the buttons is the junction up to which the block extends. The system recalculates the route. The blocked route section will be...
Page 96 - Blocking route sections; Low fuel warning
User’s manual SEAT Portable System - 96 - Useful functions 4 Indicates whether you want to drive on the route section in question or not. (Allow): The section in question is allowed on the route. (Forbid): The section in question is not allowed on the route. Blocking route sections 1. Tap on the rou...
Page 97 - While navigation is in progress (map in Navigation mode); No navigation in progress (map in Standard mode)
User’s manual SEAT Portable System Useful functions - 97 - The indicated remaining range depends on the current consumption. ► Tap on Cancel if you do not want to buy more fuel until later. While navigation is in progress (map in Navigation mode) 1. Tap on Search if you want to drive to a petrol sta...
Page 99 - Special functions for electric vehicles
User’s manual SEAT Portable System Useful functions - 99 - 10.15 Door monitoring The door monitoring function always warns you when a door in your vehicle is open. When a door is open, it is pictured as open and highlighted in colour. ► Tap on the screen to hide the door monitoring. Caution! Door mo...
Page 101 - Activating the range warning; Range warning during navigation; Range warning without navigation
User’s manual SEAT Portable System Useful functions - 101 - Activating the range warning 1. In the N AVIGATION window tap on Options > Settings > Navigation. 2. Set the Driving range warning setting to Yes. Range warning during navigation You will be warned if one of the following cases arises...
Page 102 - Saving the destination of a Multi-Stop route as a private charging; Private; Identifying favourites as charging stations
User’s manual SEAT Portable System - 102 - Useful functions If a charging station lies within the current range, you will be asked whether you want to drive to this charging station next. ► Tap on Calculate if you want to make a charging stop there. The system calculates the route. Navigation to the...
Page 103 - Special functions for CNG vehicles
User’s manual SEAT Portable System Useful functions - 103 - ► Tap on No if there is no charging possibility at this favourite. ► Tap on Normal charging station if you can charge you vehicle at normal speed at this favourite's address. This is possible at many standard household power sockets and at ...
Page 104 - Activating Multi-Stop routes
User’s manual SEAT Portable System - 104 - Useful functions Before navigation begins, you are presented with a window in which you can choose to use a Multi-Stop route or not. ► Tap on Multi-Stop route to have the system calculate a route with the necessary refuelling stops. Note: The calculation of...
Page 106 - Recalculate route: Automatically
User’s manual SEAT Portable System - 106 - Useful functions You can receive traffic information from the Live server. One of the server's functions is to evaluate anonymously collected floating car data from the many users of Live services. As the result, traffic jams can be detected and avoided mor...
Page 108 - Traffic Live
User’s manual SEAT Portable System - 108 - Useful functions 10.18.2 Displaying traffic information Current traffic information is available via the options button in many windows. ► In the N AVIGATION window, tap on Options > Traffic. The T RAFFIC INFORMATION window opens. You can use the (Up) an...
Page 109 - Yellow; Showing a single message in detail
User’s manual SEAT Portable System Useful functions - 109 - Yellow : The section is not fully blocked by the obstruction but there is a threat of delays (10-30 minutes). This can be the case for example with slow-moving traffic. No colour : The obstruction is not classified as serious. This can be t...
Page 110 - Tuning mode; Logbook
User’s manual SEAT Portable System - 110 - Useful functions 10.18.4 TMC settings ► In the T RAFFIC INFORMATION window tap on Settings. In the TMC SETTINGS window you can set the TMC traffic station and configure whether the reception of a traffic message concerning your route should affect your rout...
Page 111 - Recording trips; Before a trip; Car info
User’s manual SEAT Portable System Car info - 111 - Recording trips You can have all trips recorded automatically. 1. In the N AVIGATION window tap on More functions > Settings > Navigation. 2. Set Logbook to Yes. 3. Tap on OK. Every trip from now on will be recorded until you reset Logbook to...
Page 112 - Trip computer; Opening the trip computer; Since start; Selecting the period; Period
User’s manual SEAT Portable System - 112 - Car info 11.1 Trip computer The trip computer presents your vehicle's travel and consumption data. 11.1.1 Opening the trip computer 1. If necessary, tap on (Main menu) to open the S TART window. 2. In the S TART window, tap on Car info > Trip computer. T...
Page 113 - Status; Opening the Status window
User’s manual SEAT Portable System Car info - 113 - 11.2 Status The navigation device can show two round instruments. You can configure which instruments are shown. 11.2.1 Opening the Status window 1. If necessary, tap on (Main menu) to open the S TART window. 2. In the S TART window, tap on Car inf...
Page 114 - Performance Display; SEAT Cupra; Open the applications of the Performance Display window
User’s manual SEAT Portable System - 114 - Car info 11.3 Performance Display Note: This chapter concerns you only if you own a SEAT Cupra . From the Performance Display window you have access to additional applications such as the presentation of acceleration forces. With the S TOPWATCH application ...
Page 116 - Performance
User’s manual SEAT Portable System - 116 - Car info 11.3.4 Performance ► Open the P ERFORMANCE application (see "Open the applications of the Performance Display window" on page 114). The P ERFORMANCE window presents the following values: 1 RPM gauge ► Tap on the instrument to configure it. ...
Page 117 - Stopwatch
User’s manual SEAT Portable System Car info - 117 - 11.3.5 Stopwatch Caution! The driver makes use of the PERFORMANCE DISPLAY Application (hereinafter the Application) at its own risk, being obliged to use it pursuant to the Law and shall be liable before SEAT and/or third parties for any damage res...
Page 118 - Driving against the clock
User’s manual SEAT Portable System - 118 - Car info Driving against the clock In the S PEED and D ISTANCE windows you can measure the time you need to reach a certain speed or cover a certain distance. The speed or distance is divided into 4 sectors so that interim times can be indicated. ► In the S...
Page 119 - Overview of results
User’s manual SEAT Portable System Car info - 119 - 5 Interim time. Upon reaching a sector the clock shows the comparative time relative to previous measurements. In the options you can select whether you want the comparative time to be calculated on the basis of your best time or average time (see ...
Page 120 - Set distance; Statistics; Speed
User’s manual SEAT Portable System - 120 - Car info Set distance You can set the distance which you want to cover. 1. In the S TOPWATCH window tap on Set distance. The S ELECT GOAL DISTANCE window opens. 2. Enter the distance which you want to cover. The current setting is indicated in the S TOPWATC...
Page 121 - Applications for electric vehicles; Opening the applications for electric vehicles; Power flow
User’s manual SEAT Portable System Car info - 121 - 11.3.7 Options In the Options you can set the following: ► Unit of temperature: Select which unit you want to be used for temperature values (Celsius (°C) or Fahrenheit (°F)). ► Unit of pressure: Select which unit you want to be used for pressure v...
Page 122 - The following states can be presented:; Driving
User’s manual SEAT Portable System - 122 - Car info The following states can be presented: Driving The vehicle is moving, the driver has his foot on the accelerator. Energy is being consumed from the battery. Recuperation The vehicle is moving and being decelerated by the driver or the motor brake. ...
Page 124 - Configuring a charging location
User’s manual SEAT Portable System - 124 - Car info ► (Charging): The charging of the battery is activated. ► Week-day: The week-day which was set when defining the departure time. ► Time: The time which was set when defining the departure time. 5 If there are active error messages for the charging ...
Page 125 - Defining the departure times; Assigning a charging location
User’s manual SEAT Portable System Car info - 125 - ► Night current: Activate the checkbox alongside this setting if a cheaper off-peak rate is available. Then tap on the setting and use the (Up) and (Down) buttons to set when your off-peak rate begins and ends. The battery will then be charged pref...
Page 126 - Settings
User’s manual SEAT Portable System - 126 - Car info 3. Tap on the required charging location to select it. The D EPARTURE TIME window opens again. 4. Tap on Save. The E - MANAGER window opens. Settings Note: The following settings cannot be defined for a single charging location. They apply equally ...
Page 127 - Editing the charging location
User’s manual SEAT Portable System Car info - 127 - Editing the charging location 1. In the E - MANAGER window tap on (List) to the right of the Charging stations entry. The C HARGING STATIONS list opens. 2. Tap on the (Edit) button to the right of the charging location you want to edit. 3. Make the...
Page 128 - Energy recovery; Media
User’s manual SEAT Portable System - 128 - Media 11.4.4 Energy recovery This application presents a bar diagram of the energy which was recovered in your electric vehicle during the last 30 minutes, e.g. during braking or downhill coasting. ► Open the E NERGY RECOVERY window (see "Opening the ap...
Page 129 - Controlling the car radio
User’s manual SEAT Portable System Media - 129 - 12.1 Controlling the car radio You can use the navigation device to control basic functions of the car radio. 1. If necessary, tap on (Main menu) to open the S TART window. 2. In the S TART window, tap on Media > Radio. The R ADIO window opens. 1 I...
Page 130 - Selecting the frequency band; Setting a certain frequency
User’s manual SEAT Portable System - 130 - Media 7 Scan. Searches the entire frequency band for radio stations. Each radio station found is played for several seconds before the next is searched for. 8 Tuning up. Searches for the next higher frequency at which a radio station can be received (see al...
Page 131 - Selecting a radio station; Scan: Scanning the frequency band; Scan; Preset list
User’s manual SEAT Portable System Media - 131 - 12.1.3 Selecting a radio station Instead of setting a specific frequency you can search manually for radio stations. Note: In the car radio you can set whether the radio station search function is to search for all stations or whether only the station...
Page 132 - Selecting a saved radio station; Current; Media Player
User’s manual SEAT Portable System - 132 - Media The radio station is now saved. 3. Tap on Close. The R ADIO window opens again. The number of the memory location is now shown in front of the name of the radio station. Selecting a saved radio station 1. In the R ADIO window tap on (Preset list). The...
Page 134 - Supported audio files; AUX
User’s manual SEAT Portable System - 134 - Media 12.2.1 Supported audio files You can control the play back of audio CDs which have been inserted in the CD player of the navigation device. Also, you can play back audio files in the following formats: MP3, WMA, OGG Vorbis, AAC, FLAC 12.2.2 Selecting ...
Page 135 - Selecting files for playing back
User’s manual SEAT Portable System Media - 135 - Note: A change of memory card is detected only when the device has been switched on. If the memory card is not detected, insert it again when the device is on and running. 12.2.3 Selecting files for playing back ► In the M EDIA P LAYER window tap on (...
Page 136 - Controlling the play back; Options for the radio and media player
User’s manual SEAT Portable System - 136 - Media (Mix): The items of the current folder and its sub-folders will be played in random order. (Repeat): The items of the current folder and its sub- folders will be played in the order indicated. When all the items have been played, play back starts agai...
Page 137 - TP; Sound
User’s manual SEAT Portable System Media - 137 - Note: The options are available only when the navigation device is mounted in the vehicle. 12.3.1 Traffic information (TP) The car radio can phase out the playing back of music or navigation instructions and have traffic messages announced instead whe...
Page 138 - When the device is not mounted in the vehicle:; Pictures; Suitable files
User’s manual SEAT Portable System - 138 - Media 1 The values for treble and bass are indicated in colour on vertical scales (red). 2 The balance is presented in colour on a schematic view of the vehicle's interior (red). 3 If rear loudspeakers are installed, the fader for the front-rear balance is ...
Page 139 - Opening the picture viewer; Picture file; Operating the picture viewer; Full screen
User’s manual SEAT Portable System Media - 139 - They are also subject to file size limitations: File format Max. size JPG, JPEG, BMP 4 MB All others 1 MB 12.4.2 Opening the picture viewer 1. If necessary, tap on (Main menu) to open the S TART window. 2. In the S TART window, tap on Media > Pictu...
Page 140 - Selecting the play-back mode; Options for the picture viewer; Slideshow; Slideshow mix
User’s manual SEAT Portable System - 140 - Media 12.4.5 Selecting the play-back mode The viewing order of the pictures can be influenced. 1. In the P ICTURES window tap on Browse. The F ILE MANAGER window opens. Visible at the bottom edge of the window are buttons for the play- back modes. (Standard...
Page 141 - Background for the screensaver; Selecting a picture for the screensaver; Resetting the screensaver; Handsfree module
User’s manual SEAT Portable System Handsfree module - 141 - 12.5.2 Background for the screensaver Note: This function is not available as standard. However, you can install it very easily via the Fresh software. Fresh can be downloaded free of charge from the website www.garmin.com/pid . You can use...
Page 142 - Opening the hands-free module; Elements of the hands-free module
User’s manual SEAT Portable System - 142 - Handsfree module Opening the hands-free module 1. If necessary, tap on (Main menu) to open the S TART window. 2. In the S TART window tap on Phone. The H ANDSFREE MODULE window opens. When you start the hands-free module for the first time, a window will op...
Page 143 - Bluetooth connection; Searching for and pairing Bluetooth devices
User’s manual SEAT Portable System Handsfree module - 143 - 3 Speed Call buttons. See "Preset" on page 155. 4 Back to the previously opened window. 5 Opens the T RUSTED DEVICES window. Here you can enter which devices are connected to the hands-free module (see "Connecting to a device...
Page 144 - Searching for devices
User’s manual SEAT Portable System - 144 - Handsfree module The navigation device can connect automatically to the last connected device as soon as it is within range. The hands-free module of the navigation device can save and manage the connection data of up to 4 paired mobile phones or Bluetooth-...
Page 145 - Pairing from the mobile phone; Car Phone; Connecting to a device
User’s manual SEAT Portable System Handsfree module - 145 - 13.1.2 Pairing from the mobile phone Note: Please consult the mobile phone's manual if you are uncertain about how to carry out the following steps on the mobile phone. 1. Make sure that the Bluetooth function is activated on both the mobil...
Page 146 - Connecting manually; Connecting automatically
User’s manual SEAT Portable System - 146 - Handsfree module Connecting manually If a Bluetooth connection to a device is active, you must disconnect this connection first before you can connect to a different device. The existing connection is disconnected automatically as soon as the connection to ...
Page 147 - Activating a mobile phone
User’s manual SEAT Portable System Handsfree module - 147 - 13.1.4 Activating a mobile phone If the hands-free module is connected to two mobile phones, you can select in the H ANDSFREE MODULE window which is to be the active telephone. If you want to call someone, the call will be made via the acti...
Page 148 - Importing a phone book
User’s manual SEAT Portable System - 148 - Handsfree module 13.1.6 Importing a phone book For each paired mobile phone in the T RUSTED DEVICES list it is also possible to import its phone book and save it together with the connection data. Access to the phone book of a mobile phone is then only poss...
Page 149 - Importing recent calls; Taking a call; Unknown number; Receiving a text message
User’s manual SEAT Portable System Handsfree module - 149 - For more details about the phone book refer to the chapter "Calling a contact from the phone book" on page 152. 13.1.7 Importing recent calls For each paired mobile phone in the T RUSTED DEVICES list it is also possible to import it...
Page 150 - Making a call; Making a call with the voice commands function; Specifying a phone number
User’s manual SEAT Portable System - 150 - Handsfree module When you receive a text message (SMS), a signal tone will sound and the I NCOMING TEXT MESSAGE window will open. The header line shows which connected telephone received the text message. The name and the number of the sender will be displa...
Page 151 - Calling a contact from the phone book; Dialling a telephone number
User’s manual SEAT Portable System Handsfree module - 151 - 4. Wait for the numbers you said to appear. Repeat steps 3 to 4 until the complete phone number is shown on the display. Say "Correction" if the last number you said was not understood correctly. 5. Say "Call". The phone num...
Page 153 - Transferring a call from your mobile telephone; During a call; Moving the navigation application to the foreground; Entering numbers; Muting the microphone
User’s manual SEAT Portable System Handsfree module - 153 - Note: The R ECENT CALLS list is available to the hands-free module only for as long as the hands-free module is connected to the mobile phone. 13.4.6 Transferring a call from your mobile telephone The navigation device takes calls automatic...
Page 154 - Transferring a call to the mobile phone; Navigating to a contact from the phone book
User’s manual SEAT Portable System - 154 - Handsfree module The person on the other end of the line can no longer hear you. The modified symbol on the button indicates this. ► Tap on (Muting) to switch the microphone on again. 13.5.4 Transferring a call to the mobile phone ► In the C ALL IN PROGRESS...
Page 155 - Configuring the hands-free module; Preset; Entering a new Speed Call number or editing an existing Speed Call
User’s manual SEAT Portable System Handsfree module - 155 - (Unopened text message) (Opened text message) 2. Tap on the entry you want. Note: The T EXT INBOX list is available to the hands-free module only for as long as the hands-free module is connected to the mobile phone. It is updated automatic...
Page 156 - Deleting a Speed Call number
User’s manual SEAT Portable System - 156 - Handsfree module Deleting a Speed Call number 3. Tap on the (Delete) button. 4. Confirm that you want to delete the Speed Call number. The P RESET window opens again. No phone numbers and no name exist any longer for the selected Speed Call button. 13.7.2 S...
Page 157 - Costs; Data traffic costs
User’s manual SEAT Portable System Live Services - 157 - For information about configuring the settings in this window refer to "Configuring the navigation system" on page 163. Note: In order for the last connection to be restored without further questioning, the navigation device must be sa...
Page 158 - Costs incurred when using the Live services; Requirements for using the Live services
User’s manual SEAT Portable System - 158 - Live Services 14.1.2 Costs incurred when using the Live services You can test the Live services free of charge for a certain time. This test period begins when a connection to the Live server is set up for the first time. At the end of this test period you ...
Page 159 - Using the smartphone's Internet connection; Weather service; Weather data for your current position
User’s manual SEAT Portable System Live Services - 159 - The L IVE window opens. From there you have access to all the settings of Live . ► The system checks whether the navigation device is connected to a smartphone via Bluetooth. If there is no connection to a smartphone, you will be asked whether...
Page 160 - Weather data for your destination; Weather data for a different location; Local search
User’s manual SEAT Portable System - 160 - Live Services Weather data for your destination You can call up weather data for your destination at any time during navigation. ► Tap on Options > Services > Weather service. The W EATHER SERVICE window opens. You are shown a map view containing the ...
Page 162 - Configuring the Live services
User’s manual SEAT Portable System - 162 - Live Services ► Tap on (Call) in order to dial the number indicated. Note: The Call function is only available when the navigation device is connected via Bluetooth to a mobile phone. Whether and how a Bluetooth connection can be established is described in...
Page 163 - Configuring the navigation system
User’s manual SEAT Portable System Configuring the navigation system - 163 - The S ETTINGS window opens. Use Live services: Select whether you want the Live services to be available (Yes or No). Source of traffic information: Select the traffic information source you want to use (Live services or ra...
Page 164 - A list with all possible values opens. The currently valid value is
User’s manual SEAT Portable System - 164 - Configuring the navigation system Some settings can adopt many different values. These settings can be recognised by the (List) button. The current value is visible. 1. Tap on (List). A list with all possible values opens. The currently valid value is marke...
Page 165 - Appendix; Technical data of the navigation device
User’s manual SEAT Portable System Appendix - 165 - 16 Appendix 16.1 Technical data of the navigation device Model: 4NSF Dimensions 137,7 x 83,3 x 18,2 mm Weight 191 g Operating conditions Operating temperature -10°C to 70°C (14°F to 158°F) Storage temperature -20°C to 60°C (-4°F to 140°F) Humidity ...
Page 166 - End user licence agreement for software and; Licence Terms and Conditions
User’s manual SEAT Portable System - 166 - Appendix 16.2 End user licence agreement for software and data The software embedded in your Garmin product (the “Software”) is owned by Garmin Ltd. or its subsidiaries (“Garmin”). The map data embedded in or accompanying your Garmin product (the “Map Data”...
Page 167 - Disclaimer of warranty.
User’s manual SEAT Portable System Appendix - 167 - Garmin also reserves the right to discontinue offering any Data supplied by any third party supplier if such supplier ceases to supply such content or Garmin’s contract with such supplier terminates for any reason. Restrictions. Except where you ha...
Page 168 - Disclaimer of endorsement.
User’s manual SEAT Portable System - 168 - Appendix OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF GARMIN OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. GARMIN’S AND ITS LICENSORS’ TOTAL AGGREGATE LIABILITY WITH RESPECT TO ITS OBLIGATI...
Page 169 - Government end users.; Declaration of conformity
User’s manual SEAT Portable System Appendix - 169 - Governing law. The above terms and conditions shall be governed by the laws of Kansas, without giving effect to (i) its conflict of laws provisions or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is ex...
Page 170 - Troubleshooting; computer is shown on the screen.
User’s manual SEAT Portable System - 170 - Troubleshooting 17 Troubleshooting In this chapter you will find solutions to problems which may arise during use of the navigation system. This list does not claim to be complete. Answers to many other questions can be found on the Garmin Würzburg GmbH web...
Page 171 - the music or view the pictures on the memory card.
User’s manual SEAT Portable System Troubleshooting - 171 - 3. Tap on OK. 4. Tap on (Back). The N AVIGATION window is now open again. I have inserted a memory card but it is not detected. I am unable to play the music or view the pictures on the memory card. Try the following: 1. Make sure that the m...
Page 172 - Index
User’s manual SEAT Portable System - 172 - Index 18 Index A Activate .......................................... 147 B Block .......................................... 94, 96 Bluetooth Activate ...................................... 147 Connect ..................................... 145 Pairing .........