Frigidaire FFHT1814WB - Installation Manual
Frigidaire FFHT1814WB Refrigerator – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Ice Maker Installation Instructions; wide refrigerator
- Page 3 – *If you have a unit with an access cover,
- Page 4 – Ice Maker Installation Instructions (with access cover); NOTE; Connecting Ice
- Page 5 – Ice Maker Installation Instructions (without access cover); Connecting Ice Maker to Water Supply
- Page 6 – Before Installing The Water Supply Line, You Will Need:; Smart Choice; WARNING; To Avoid Property Damage:; IMPORTANT
- Page 7 – To Connect Water Supply Line To Ice Maker Inlet Valve; Units with access cover; Units without access cover
AUTOMATIC ICE MAKER
INSTALLATION INSTRUCTIONS
P/N: A13109107
WARNING
• To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator
from electrical power before connecting a water supply line to the refrigerator.
• Connect the ice maker to a potable water supply only.
An authorized service technician is recommended to install the ice maker kit.
Ice Maker (IM117000) Kit Components
5304520536
Ice Maker
QTY: 1
5304525288
Shoulder Screw
QTY: 5
5304520538/5304520539
Cover with Door
QTY: 1
5304520535
Ice Bin
QTY: 1
5304520537
Bracket (30" only)
QTY: 1
Parts needed for install inside the unit
Tools Needed:
• Flat head screw driver
• Phillips or Quadrex driver
• ¼
" Hex driver
• Gloves
• Drill
• Needle nose pliers
Parts needed for install on back side of the unit
NOTE
Check with your local building authority for recommendations on water lines and associated materials prior to
installing your new refrigerator. For household water line hookup from the home water supply system to the unit,
Frigidaire recommends for homes with existing valves its
Smart Choice
®
water line kit 5304437642 (with a 6�
Stainless Steel Water Line) and for homes without an existing valve, Frigidaire recommends its
Smart Choice
®
water line kit 5304493869 (with a 6� Polyline Waterline). Please refer to Frigidaire.com for more information.
5304520540
Water Valve
QTY: 1
218976923
Tube
QTY: 1
241500304
#8 screw
QTY: 2
218515401
Hose and
Harness Clip
(30" only)
QTY: 3
5304455846
Clamp
¼
"
QTY: 1
5303001193
Clamp
½
"
QTY: 1
NSF/ANSI/CAN 61: Q
≤
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Frigidaire FFHT1814WB
Summary
2 Ice Maker Installation Instructions 1. Unplug refrigerator from electrical outlet. 2. Lift the freezer shelf up and out. Set aside. See Figure 1. 3. Remove water inlet and electrical cover, located on the inside of the unit, by inserting a flathead screwdriver on left side of opening in the small ...
3 Ice Maker Installation Instructions 9. To install the ice bin, the freezer shelf needs to be in the lowest position. Slide the ice bin between the side wall and the right side of the ice maker housing positioned on the shelf. See Figure 7. 10. Locate the Ice maker installation label on the rear ou...
4 Ice Maker Installation Instructions (with access cover) NOTE Ensure power cord is aligned with the notch at the bottom of the access cover and the water line is located inside the notch at the top right of the cover. 16. Plug the connector on the water valve wire har- ness into the connector abo...
