Frigidaire FFEF3050LS- Manual

5 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP • Know which knob controls each surface heating unit . Place a pan of food on the unit before turning it on, and turn the unit off before removing the pan. • Use proper pan size —This appliance is equipped with one or more...

6 FEATURES AT A GLANCE Your electric range features include: 1 . Electronic oven control with kitchen timer. 2 . Interior oven light switch (some models). 3 . Left front single (some models) or dual (some models) radiant element control. 4 . Left rear single (some models) or dual (some models) radia...

7 Types of oven racks Your range may be equipped with one or more of the oven rack styles shown. BEFORE SETTING OVEN CONTROLS Oven vent location The oven vent is located under the left side of the control panel (See Fig. 1). When the oven is on, warm air passes through this vent. This venting is nec...

8 BEFORE SETTING SURFACE CONTROLS NOTES About the ceramic glass cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Be sure to match the pan size with the diameter of t...

9 Flat bottom and straightsides.Tight fitting lids.Weight of handle doesnot tilt pan. Pan is wellbalanced.Pan sizes match theamount of food to beprepared and the size ofthe surface element.Made of a material thatconducts heat well.Easy to clean.Always match potdiameter to element size. Curved and wa...

10 SETTING SURFACE CONTROLS Single radiant surface elements To operate the single radiant element: 1. Place correctly sized cookware on single radiant surface element. 2. Push in and turn the surface control knob in either direction (Fig. 2) to the desired setting (Refer to the Suggested radiant sur...

11 Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently. Do not place flammable items such as plastic salt and pepper shakers, spoon holders or plas...

12 SETTING SURFACE CONTROLS Keep Warm Zone (some models) The purpose of the keep warm zone is to keep hot cooked foods at serving temperature. Use the keep warm feature to keep cooked foods hot such as; vegetables, gravies, casseroles, soups, stews, breads, pastries and oven-safe dinner plates. Alwa...

13 Home Canning Be sure to read and observe all the following points when home canning with your appliance. Check with the USDA (United States Department of Agriculture) website and be sure to read all the information they have available as well as follow their recommendations for home canning proce...

14 OVEN CONTROL FUNCTIONS Changing temperature display (°F or °C) The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The oven may be programmed for any temperature from 170°F to 550°F (77°C to 287°C). READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. Fo...

15 The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven isready. NOTE Setting th...

16 SETTING OVEN CONTROLS Setting bake The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). The factory preset automatic bake temperature is 350°F (177°C). To set bake 1. Press bake . "— — —" appears in the display. 2. Within 5 seconds, press the or . The...

17 SETTING OVEN CONTROLS To program oven for a delayed start time and to shut-off automatically 1. Be sure that the clock displays the correct time of day. 2. Place food in the oven.3. Press bake . " — — — ° " appears in the display. 4. Within 5 seconds, press the or . The display will show ...

18 SETTING OVEN CONTROLS To set Broil 1. Arrange the oven rack while oven is still cool.2. Press broil . " — — "will appear in display. 3. Press and hold the or until the desired broil setting level appears in the display. Press the for HI broil or the for LO broil. Most foods may be broiled...

19 Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you can adjust the control so the...

22 CARE & CLEANING Surface type Recommendation • Porcelain enamel broiler pan and broiler pan insert (if equipped) • Door liner & body parts Use hot, soapy water and a cloth. Dry with a clean cloth. For general cleaning, use hot, soapy water and a cloth. For more difficult soils and built-up...

23 Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop. D o not: • Slide anything metal or glass across the cooktop.• Use cookware with dirt or dirt build up on bottom; replace with clean cookware before using. • Use your cooktop as a cutting board or work surface i...

24 CARE & CLEANING Plastic or foods with a high sugar content: These types of soils need be removed immediately if spilled or melted onto the ceramic cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur if not removed immediately . After turning the surface elemen...

25 The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To remove oven door: 1. Open oven door completely (horizontal with floor - See Fig. 1). 2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely to...

26 BEFORE YOU CALL • Solutions to common problems Surface element does not heat. Entire appliance does not operate. • The time of day is not set. The time of day must first be set in order to operate the oven. See “Setting the clock” in the Setting oven controls section. • Make sure cord/plug is plu...

28 MAJOR APPLIANCE WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is i...