Friedrich BRO412W1A - Manual
Friedrich BRO412W1A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Before getting started; You cannot; Placing the indoor unit; DO NOT PLUG IN INDOOR UNIT until you have; What’s in the carton?
- Page 3 – There are two options available:; CAUTION
- Page 4 – STEP 2 – Hang wall mount bracket; DO NOT drill the entire 3” hole from the
- Page 5 – STEP 4 - Line set installation; ) DO NOT bend tubing in a radius smaller than 6”; window installation); STEP 5 - Hang the indoor module on the wall bracket.; the connecting line form in the SimpleSillTM.
- Page 6 – DO NOT cut or kink the connecting line!; STEP 8 – Connect the electrical connector from the connecting; All Covers must be in place to operate unit.
- Page 8 – Remote Control Operation
Installation Instructions
for BRO412W1A
4000 - 12000 Btu
Friedrich Part No. 96091000 (Rev. 01)
Service Questions: Contact Friedrich at (800) 541-6645
Sales Inquiries: Contact Sylvane at (800) 934-9194 or visit sylvane.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Before getting started Identify the locations where you will mount the indoor module and place the outdoor module. Keep in mind, there is 25’ of connection line for connecting indoor and outdoor pieces, so locate them accordingly. You cannot add additional length if they are too far apart. Placing t...
STEP 1 - Determine how you will connect the indoor and outdoor modules. There are two options available: OPTION 1 is to drill a 3” hole through the wall to pass the connecting line through. OPTION 2 is to use the Friedrich SimpleSill™ kit to pass the connecting pipe through the window. The Simple- S...
Level STEP 2 – Hang wall mount bracket Using the paper template as a guide, locate two studs behind screw hole locations in the template. It is preferable to mount the hanging plate on studs. If two studs are not available, utilize anchors appropriate for the wall type with a combined weight capacit...
