Fostex 8360 - Manual
Fostex 8360 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Cross cable of category 5 or higher
- Page 4 – Connection to an existing LAN; Straight cable of category 5 or higher
- Page 5 – Use the JOG dial to select the screen from among those
- Page 6 – You must set the IP address for the recorder.; IP address setting; Use the shuttle to select the flashing digit and use the JOG; You must set the subnet mask value for the recorder.; Subnet mask setting; Use the shuttle to move the flashing digit and use the JOG
- Page 7 – Anonymous setting
- Page 8 – Enter a password in the same manner as entering a; Ether mode setting
- Page 9 – Personal computer setting; Default gateway: You do not have to set this.; Follow the procedure below.; Setting for connection
-
Page 10 – Transferring files; Select the program folder in which the file to be acquired; Note; Getting a file from the recorder;
- Page 11 – Select the program folder to which you are going to put the; Putting files to the recorder; Functions of the FTP application; Notes on transferring files
- Page 12 – Declaration of EC Directive; The Affect of Immunity on This Equipment; FOSTEX DISTRIBUTORS LIST IN EUROPE
Model
8360
Owner’s Manual
(Ether card for the Model D2424 / D2424LV)
Table of Contents
Introduction ...............................................................................2
Installing the ether card ............................................................2
FTP client application ...............................................................2
Connecting to a personal computer .......................................3
One to one connection ..............................................3
Connection to an existing LAN .................................4
TCP/IP setting (recorder's initial setting) ...............................5
IP address setting .......................................................6
Subnet mask setting ..................................................6
Anonymous setting ...................................................7
Login name (password) setting ...............................7
Ether mode setting ....................................................8
Personal computer setting ......................................................9
TCP/IP setting ............................................................9
Setting for connection ..............................................9
Transferring files .....................................................................10
Getting files from the recorder ..............................10
Putting files to the recorder ...................................11
Notes on transferring files .....................................................11
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
There are two types for connecting the recorder to a personal computer using the LAN cable; one to oneconnection and LAN connection. The following describes how to make connection for each type. Connecting to a personal computer 1 2 3 45 6 7 8 1 2 3 45 6 7 8 One to one connection To connect the reco...
Connection to an existing LAN To connect the recorder to an existing LAN, use a "straight cable of category 5 or higher" for connectionbetween the recorder and a hub, as shown below. <Note> When connecting the recorder to an existing LAN, set the IP address and subnet mask correctly. O...
Make the settings in the "TCP/IP Setup?" menuwhich is added to the setup mode of the recorderso that the Model 8360 can be used as an FTP server. TCP/IP setting (recorder's initial setting) 1. Turn on the recorder's power. 2. Press the [SETUP] key to enter the setup mode. 3. Use the JOG dial...
