Foster FMIC180 - Manual - manualsarea.com

Page 3 - FMIC 180 & 260 Electronic Modular Ice Cuber

CONTENTS - FMIC 180 & 260 3 FMIC 180 & 260 Electronic Modular Ice Cuber Page 1. SPECIFICATIONS 13 2. FOR THE INSTALLER 14 2.1 Important operating requirements 14 2.2 Select location 14 2.3 Ice machine 14 2.4 Final check list 14 3. FOR THE PLUMBER 15 3.1 Conform to all applicable codes 15 3.2...

Page 4 - Specification; Capacities; Guidelines for Icemaker Bin Lids; NO BIN LID; To Conveyor Kit Micro

F200 F200 F200 F200 F200 F300 F300 F300 F300 F300 Output (kg/ 24 hours) 215 320 Bin Storage Capacity (kgs) 150/ 210 150/210 Cubes Per Cycle (kgs) 2.3 2.3 Standard Cube Size 24mm x 24mm x 26mm 24mm x 24mm x 26mm Cycle Time (minutes) 16 11 Amps start/run 29/5.5 31/8.5 Watts Consumption 1000 1600 Machi...

Page 5 - preface; Installation Instructions; Ice Storage Bin

10) Connect the3/4" Feeding pipe(supplied) to themachine and to thecold drinking watersupply line. It isadvisable to install ashut-off valve (notsupplied) to thewater feed pipe. Ifthe feed water contains impurities,the installation of afilter system is recommended. If thewater is particularly ha...

Page 6 - Symptom; Maintenance and Cleaning Instructions; Ice Maker

2. Start Up. 2.1 Start–up Cycle. Open the water valve and switch on the power to the machine.The machine enters the Start-Up mode with the energising of the PC Board with the green LED (Power On) illuminated.It is necessary to remove the front cover of the machine to see all of the LED’s.The Green L...

Page 7 - Operation; Refrigeration during freezing.; Wiring Diagrams

Check the second and third cube harvest. Ensure that they are the correct size and make adjustments to the Ice Sensors Fingers asnecessary. In certain areas where there are extreme water problems it may be necessary to fit a filter or purifying equipment. NOTE. If the water is too soft (demineralize...

Page 12 - Maintenance, Cleaning and Sanitation Instructions.

10. Maintenance, Cleaning and Sanitation Instructions. The Foster Modular Ice Cuber represents a sizeable investment of time and money in any company’s business.In order to receive the best return for the investment periodic maintenance is essential.It is the USER’S RESPONSIBILITY to see that the ma...

Page 14 - For The Installer; For The Electrician

A. B. C. 2. For The Installer 2.1 Important Operating Requirements MINIMUM MAXIMUM Air Temperature 10 ° C (50 ° F) 38 ° C (100 ° F) Water Temperature 5 ° C (40 ° F) 38 ° C (100 ° F) Water Pressures 1 bar gauge 5 bar gauge Electrical VoltageVariations VoltageRating Specified on Nameplate –10% +10% Ex...

Foster FMIC180 - Manual

Table of Contents:

Summary

Other Foster Models