FoodSaver 985121153M - User Manual
FoodSaver 985121153M Food Processor – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
MAKE A FOODSAVER
®
BAG:
1. Open Appliance Lid
and place roll into Roll
Storage.
2. Lift up Roll Cutter Bar
and place bag material
beneath the cutter bar.
Pull out enough bag
material to hold item
being vacuum sealed, plus
3 inches (7.62 cm). Lower
the Roll Cutter Bar and
slide Bag Cutter across
Cutter Bar.
3. Move Easy Lock Latch to
the Open position. Open
Appliance Lid. Insert
one end of bag material
across Sealing Strip.
4. Close lid and turn Easy
Lock Latch to Operate
position.
5. Press Seal Button.
6. When Seal Indicator
Light turns off, sealing is
complete. Turn Latch to
Open position, lift lid and remove bag.
HOW TO:
FM2100 SERIES QUICK START GUIDE
FoodSaver
®
Select Vacuum Sealer
Español
p. 3
Français
p. 2
VACUUM SEAL FOODSAVER
®
ZIPPER BAGS:
(sold separately)
1. Prepare zipper bags
according to FoodSaver
®
Accessory Guidelines,
which are included with
accessory purchases. For
zipper bags, make sure
not to put any food under
the valve and press zipper
closed with finger while bag is lying down on a flat
surface.
2. Turn Latch to Operate position.
3. Insert one end of Accessory Hose into Accessory Port
on Appliance. Place Handheld Sealer on zipper bag
valve.
4. Press Vacuum & Seal Button.
Zipper bags are safe for pantry and fridge use only.
VACUUM SEAL A FOODSAVER
®
BAG:
1. Place item(s) in bag,
allowing at least 3 inches
(7.62 cm) of space between
bag contents and top of
bag.
2. Open Appliance Lid and
place open end of bag into
Vacuum Channel (Drip Tray).
3. Close lid and turn Easy Lock
Latch to Operate position.
4. Press Vacuum & Seal Button
to begin vacuum and
sealing process. Motor will
continue to run until bag
is fully vacuumed, then will
automatically seal.
5. When Seal Indicator Light
turns off, turn Latch to Open
position, lift lid and remove
bag.
Refrigerate, freeze or store
as needed.
VACUUM SEAL FOODSAVER
®
CONTAINERS:
(sold separately)
1. Prepare FoodSaver
®
Preserve
& Marinate Container
according to Guidelines,
which are included with
container purchase.
2. Turn Latch to Operate
position.
3. Insert one end of Accessory
Hose into Accessory Port on
Appliance. Place Handheld Sealer on container valve.
4. Press Vacuum & Seal Button.
To release vacuum and open, turn knob on lid to Open.
See Owner's Manual for full instructions and safeguards.
Place Bag in Vacuum Channel
Close and Latch Lid
Operate
Store
Open
Press Vacuum & Seal Button
p. 1
Place Bag on Sealing Strip
OPE
N EN
D
SEA
LED
END
SEA
LED
END
OP
EN
END
SEA
LED
EN
D
Close and turn Easy Lock Latch to
Operate position
Press Seal Button
Operate
Store
Open
FM2100_22EFSQSG1 (digital).indd 1
FM2100_22EFSQSG1 (digital).indd 1
2022/3/16 上午10:14
2022/3/16 上午10:14
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.