Fluke PN 2063508 - Manual

Table of Contents:

• Page 2 – Table of Contents; Title
• Page 3 – ii
• Page 4 – READ FIRST: SAFETY INFORMATION; Warning; Do not apply more than 600 V rms between a terminal and earth ground.
• Page 5 – SYMBOLS
• Page 6 – DISPLAY
• Page 7 – OPERATING FEATURES; Figure 2. Operating Features
• Page 8 – STANDBY MODE
• Page 9 – is displayed. In manual
• Page 10 – MEASURING VOLTAGE; impedance of the meter is 2 k; , and LoZ is displayed to indicate that the meter is in; in ac
• Page 11 – Figure 3. Measuring Voltage
• Page 12 – TESTING CONTINUITY AND MEASURING RESISTANCE; External voltage across the components causes invalid readings.
• Page 13 – Figure 4. Continuity and Resistance Measurements
• Page 14 – TESTING DIODES; is displayed when the
• Page 15 – Figure 5. Testing Diodes
• Page 16 – VCHEK AND HOW TO USE IT
• Page 18 – MEASURING CAPACITANCE; to connect the positive to [
• Page 19 – Figure 6. Measuring Capacitance
• Page 20 – USING MIN MAX FUNCTIONS; Insert the test leads, and put the meter in volts or ohms.
• Page 21 – Figure 7. Displaying Minimum and Maximum Reading
• Page 22 – Recording Minimum and Maximum Reading with Elapsed Time; ] down while moving the
• Page 23 – Figure 8. Maximum and Minimum Reading with Elapsed Time
• Page 24 – Capturing Continuity Intermittents with Continuity Capture; shown in Figure 9, and
• Page 26 – TURNING BEEPER OFF; To disable all beeper functions, press and hold down [; MAINTENANCE; Replacing the Battery
• Page 30 – SPECIFICATIONS