Fluke MedTester 5000C - Manual

Page 3 - Note; Before You Begin; In these instructions,

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 1 medTester 5000C Field Upgrade Installation Instructions These instructions tell you how to perform an instrument firmware upgrade to a medTester 5000C and how to install optional modules into a Fluk...

Page 4 - Module Identification

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 2 NOTE: IMPORTANT When upgrading your 5000C firmware, all memory for test records and checklists will be erased. Process all current medTester test records first. For example, upload them to your comp...

Page 5 - Module and Upgrade Parts; Firmware Upgrade; If you are upgrading your medTester 5000C firmware,; and; your; Required Equipment for Upgrade/Modules

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 3 Module and Upgrade Parts Check that you have received the following parts with your module or upgrade: Firmware Upgrade • 2 IC RAM chips (40-pin devices, labeled U20 and U21) Modules 2, 3, 5, 6, 8, ...

Page 6 - an IBM-compatible personal computer with:; Installing Integrated Circuits; Use the procedures described in this section for installing:

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 4 To install modules that include an installation disk • an IBM-compatible personal computer with: 9 Microsoft Windows Operating Systems (95, 98, 2000, or XP); 9 a 3.5" floppy disk drive; 9 a seri...

Page 7 - OR

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 5 IC Removal and Installation Description There are two types of IC sockets which you may encounter—one that is plain, and one that has a lever handle. ICs are removed or installed as follows: Plain S...

Page 8 - IC Installation Procedure; This is your authorization to remove the; Disassembly

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 6 IC Installation Procedure This section describes the procedure you can use to install ICs. It includes instructions for the disassembly of the medTester 5000, replacement and installation of ICs, te...

Page 9 - Install Integrated Circuits; MAIN; Reassembly

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 7 Install Integrated Circuits 1. For a medTester 5000C Firmware Upgrade, remove IC U20 and U21 on the digital PCB, and install the new U20 and U21 (40-pin devices with labels). 2. For Modules 4 (Expan...

Page 10 - Enabling Modules; MUST; F5 UTIL

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 8 4. Fold the case halves back together. Attach the top case to the bottom case with the nine (9) screws and lockwashers. These are the stainless steel screws. Enabling Modules Perform the steps descr...

Page 11 - Programs; port; MODULES SUCCESSFULLY LOADED

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 9 6. Run the computer in DOS mode (command prompt). Note If running Windows 95 or 98, with the mouse you can click and hold the Start button, then select Programs and MS-DOS Prompt . If running Window...

Page 12 - press of; F5 NEXT; will sequentially scroll through each installed module

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S 10 7. To install more than one module, repeat steps seven (7) through nine (9) for each module which has an installation disk. Install them in numerical order. 8. If necessary, return to Windows from ...

Fluke MedTester 5000C - Manual

Table of Contents:

Summary

Other Fluke Models