Fisher & Paykel DD605I - Manual
Fisher & Paykel DD605I – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Cut Hazard; Safety and warnings
- Page 3 – Contents; SAVE THESE INSTRUCTIONS
- Page 4 – Product preparation; Double DishDrawer models; Measure; Measure; width of ALL panels
- Page 5 – Toe kick preparation; Adequately sealed to withstand moisture (50; Parts supplied; height of toe kick panel; Toe kick options
- Page 6 – Single DishDrawer models; width of the panel; height of the panel; width of panel; height of panel
- Page 7 – Use this diag; Integrated Panel material
- Page 8 – Badge cut-out, handle and mounting bracket; Ensure the product is not plugged in; Badge z
- Page 9 – Securing the mounting brackets
DishDrawer
Integrated panel preparation
NZ AU GB IE
DS605I and DD605I models
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Important! Read these instructions completely and carefully. Ensure the product is not plugged in. Installation of DishDrawer® panels requires basic mechanical and electrical skills. Installation must comply with your local building and electricity regulations. Failure to install the DishDrawer pane...
1 Contents Double models Product preparation 2 Single models Product preparation 4 Panel Installation Badge cut-out, handle and mounting bracket 6 Securing the mounting brackets 7 Reconnecting the wires and fitting the 8 panels and a custom toe kick (double models only) Important! SAVE THESE INSTRUC...
2 (min. 311.5 mm) Product preparation Double DishDrawer models A C Installation diagrams for illustration purposes only The following calculations assume the top of the upper panel is aligned with the top of the adjacent cabinetry. The fi nal panel/cabinetry alignment is achieved by adjusting the fe...
