Fisher & Paykel DD36S - Manual
Fisher & Paykel DD36S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Product dimensions; Cabinetry dimensions; Minimum clearances
- Page 3 – PARTS SUPPLIED; Drain hose; an be located; Moisture; Water supply
- Page 4 – OPTIONALLY HARD WIRING THE PRODUCT; Ensure the drawer is; Mark the placement in
- Page 5 – RECOMMENDED METHOD - SECURE WITHOUT; OR
- Page 6 – Ensure hoses and cord; The product has three pairs
- Page 7 – PLUMBING AND DRAINAGE OPTIONS; DishDrawer® with Waste Disposal; HIGHL; DishDrawer® and Standpipe
- Page 8 – button to turn; Ensure the product is secured to the cabinetry.
SAFETY AND WARNINGS
1
Important safety instructions!
Installation of this DishDrawer® requires basic mechanical and electrical skills.
Be sure to leave these Instructions with the Customer.
Installation must comply with your local building and electricity regulations.
At the completion of the DishDrawer® installation, the Installer must perform the Final Checklist.
Remove all packaging materials supplied with the DishDrawer®.
This DishDrawer® is manufactured for indoor use only.
Ensure all water connections are turned OFF. It is the responsibility of the plumber and
electrician to ensure that each installation complies with all Codes and Regulations.
The DishDrawer® MUST be installed to allow for future removal from the enclosure if service is required.
The switched power outlet must be outside the DishDrawer® cavity, so that it is accessible after
installation.
Care should be taken when the appliance is installed or removed to reduce the likelihood of damage to
the power supply cord.
If the DishDrawer® is to be relocated from one installation to another it must be kept upright to avoid
damage from water spillage.
Make sure only new hoses are used for connection (supplied with DishDrawer®). Old hoses should not
be reused.
Failure to install the DishDrawer® correctly could invalidate any warranty or liability claims.
If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring the vehicle,
boat or mobile facility containing the product to the service shop at your expense or pay the service
technician’s travel to the location of the product.
DishDrawer®
Installation instructions
DD36S models
US CA
WARNING!
Electrical hazard
Before installing the DishDrawer®, remove the house fuse or open the circuit
breaker.
If permanently connecting the DishDrawer®, be sure the power is isolated and
the DishDrawer® unplugged.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least
resistance for electric current. This appliance is equipped with a cord having
an equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and grounded in accordance
with all local codes and ordinances. WARNING - Improper connection of the
equipment-grounding conductor can result in a risk of electric shock. Check with
a qualified electrician or service representative if you are in doubt as to whether
the appliance is properly grounded.
If the DishDrawer is installed as a permanently connected appliance:
GROUNDING INSTRUCTIONS - This appliance must be connected to a grounded
metal, permanent wiring system, or an equipment-groounding conductor must
be run with the circuit conductors and connected to the equipment-grounding
terminal or lead on the appliance.
Do not modify the power supply plug provided with the appliance - if it will not
fit the outlet, have a proper outlet installed by a qualified electrician. Do not use
an extension cord, adapter plug or multiple outlet box.
Failure to follow this advice may result in electrical shock or death.
Important!
SAVE THESE INSTRUCTIONS
The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our
local website listed at the end of this document or contact your local Fisher & Paykel dealer.
WARNING!
Cut hazard
Take care - panel edges
are
sharp.
Failure to use caution could
result in injury or cuts.
95 lb
43 kg
WARNING!
Very Heavy
Do not attempt to lift this
product
unassisted.
Lifting unassisted may
cause serious injury.
(1,1) -1- 599796A DD36S installA2 USCA.indd 19/2/10 11:32:01 AM
(1,1) -1- 599796A DD36S installA2 USCA.indd 19/2/10 11:32:01 AM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3 PRODUCT DIMENSIONS CABINETRY DIMENSIONS A F B C E E D G H I K Product dimensions (inches (mm)) Pr efi nished DD36SDFT X In te grate d DD36STI A overall height of product (incl. front panel height) 18 13⁄16” (478) min. 18 1⁄16” (458) B overall width of product ( incl. front panel) 35 ¼ ” (895) mi...
Important! Be sure the edges of the services hole are smooth or covered. If the services hole is through a metal partition the hole must be protected with the Edge protector supplied to prevent damage to the power cord or hoses. These marks indicate formed bracket screw locations. Preferred position...
6 OPTIONALLY HARD WIRING THE PRODUCT 6 7 8 1 2 3 4 5 9 9 10 11 18 19 15 16 17 14 12 13 12 10 A C B D Ensure the drawer is removed and then rotated counter- clockwise to prevent kinked hoses. Remove knock-out for cable clamp. Fit suitable cable clamp for the conduit and terminate the wiring as shown....
