Fisher & Paykel DD24ST - Manual
Fisher & Paykel DD24ST – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Product dimensions; Cabinetry dimensions; Minimum clearances
- Page 3 – PARTS SUPPLIED; Water Connection; CAVITY PREPARATION; Water Pressure; rvices can be locat
- Page 4 – OPTIONALLY HARD WIRING THE PRODUCT
- Page 6 – RECOMMENDED METHOD; DRAWER REMOVAL; ALTERNATIVE METHOD; SECURE BY DRAWER REMOVAL; OR
- Page 7 – MOVE INTO THE CAVITY; optional; If top mounting
- Page 8 – DishDrawer® with Waste Disposal; PLUMBING AND DRAINAGE OPTIONS
- Page 9 – FINAL CHECKLIST
Important!
SAVE THESE INSTRUCTIONS
The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our
website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.
SAFETY AND WARNINGS
1
DishDrawer®
Installation instructions
US CA
DD24ST models
Important safety instructions!
Installation of this DishDrawer® requires basic mechanical and electrical skills.
Be sure to leave these Instructions with the Customer.
Installation must comply with your local building and electricity regulations.
At the completion of the DishDrawer® installation, the Installer must perform
Final Check List.
Remove all packaging materials supplied with the DishDrawer®.
This DishDrawer® is manufactured for indoor use only.
Ensure all water connections are turned OFF. It is the responsibility of the plumber and
electrician to ensure that each installation complies with all Codes and Regulations.
The DishDrawer® MUST be installed to allow for future removal from the enclosure if service is required.
The switched power outlet must be outside the DishDrawer® cavity so that it is accessible after
installation.
Care should be taken when the appliance is installed or removed to reduce the likelihood of damage to
the power supply cord.
If the DishDrawer® is to be relocated from one installation to another it must be kept upright to avoid
damage from water spillage.
Make sure only new hoses are used for connection (supplied with DishDrawer®). Old hoses should not
be reused.
Failure to install the DishDrawer® correctly could invalidate any warranty or liability claims.
If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring the vehicle,
boat or mobile facility containing the product to the service shop at your expense or pay the service
technician’s travel to the location of the product.
WARNING!
Electrical hazard
Before installing the DishDrawer®, remove the house fuse or open the circuit
breaker.
If permanently connecting the DishDrawer®, be sure the power is isolated and
the DishDrawer® unplugged.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least
resistance for electric current. This appliance is equipped with a cord having
an equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and grounded in accordance
with all local codes and ordinances. WARNING - Improper connection of the
equipment-grounding conductor can result in a risk of electric shock. Check with
a qualified electrician or service representative if you are in doubt as to whether
the appliance is properly grounded.
If the DishDrawer is installed as a permanently connected appliance:
GROUNDING INSTRUCTIONS - This appliance must be connected to a grounded
metal, permanent wiring system, or an equipment-groounding conductor must
be run with the circuit conductors and connected to the equipment-grounding
terminal or lead on the appliance.
Do not modify the power supply plug provided with the appliance - if it will not
fit the outlet, have a proper outlet installed by a qualified electrician. Do not use
an extension cord, adapter plug or multiple outlet box.
Failure to follow this advice may result in electrical shock or death.
WARNING!
Cut hazard
Take care - panel edges are sharp.
Failure to use caution could result in injury or cuts.
(1,1) -1- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:15 PM
(1,1) -1- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:15 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3 PRODUCT DIMENSIONS CABINETRY DIMENSIONS A B C E D F G H J Prefinished Flat door & Integrated models for 18 7⁄8” (480mm) cavity Prefinished LCD models & Integrated models for 17 15⁄16” (456mm) cavity K Product dimensions (inches (mm)) Pr e fi nished LCD ** DD24ST Pr e fi nished Flat door ...
PARTS SUPPLIED Clamp (1) Wire clip (1) Phillips 5⁄8 ” (16 mm) screws (7) 1 ½ ” (38 mm) bottom fixing screws & metal washers (2) Drain hose support (1) Moisture protection tape (1) (to prevent moisture damage) Cavity bracket kit (1) (supplied only with Prefinished flat door and Integrated models)...
3 4 5 6 7 7 8 8 1 30 mm 2 1 2 1 13 17 14 15 15 16 9 12 11 11 10 A Ensure the drawer is removed and then rotated counter-clockwise to prevent kinked hoses. Before refitting the drawer, ensure the hoses are not twisted and the latches at the rear of each drawer runner are facing forward. Ensure the dr...
